Skip to content
Brick Style White tile — official product image
Bolton, Ontario
2.3″ x 10″MatteNon-Rectified Edge

Brick Style White

SKU GW.BT.WHT.2,3x10

A chalk-white brick face with a hand-limed texture — brightness with a surface, not a flat panel. · brick look wall tile

Pricing

Price on request
Call our Bolton showroom

Book a Free Estimate
Brick Style White
Material
InstallationProfessional tile installation available — contact us for an estimate
Get a Quote
Brick Style White tile
Brick Style White tile — 2.3" x 10" Matte face
Brick Style White — installed (official scene)

Quick Summary About the Product

White is the version of this brick that lets light bounce. The face is a chalky, slightly uneven white with the shallow ripples and dips of brick that has been painted and repainted, so a wall of it catches shadow instead of going blank. It is a glazed porcelain wall tile, 2.3″ x 10″, laid in the traditional brick offset. It is stocked in 2.3″ x 10″ in a matte finish.

How this tile lives: It is the safe way to get texture into a bright room: kitchen splash walls, bathroom feature walls, hallway runs and studio backdrops where painted brick is the look but real brick is not an option.

More in this series: Brick Style Orange

At a Glance

Selected Size
Thickness
Finish
Pieces / Box
Application
Approved Use
Per sq ft

Available Accessories

Setting & Finishing Materials

Everything the installation needs, supplied alongside your tile.

Available in storeTile MortarQuantity confirmed at estimate

Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.

Available in storeGroutQuantity confirmed at estimate

Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.

Available in storeWaterproofing & Uncoupling MembraneQuantity confirmed at estimate

Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.

Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.

Glazed Porcelain · Brick look · Non-rectified Edge

Brick Style White

SKU GW.BT.WHT.2,3x10

Size
Finish

Matte is the only finish produced in this range. This colour is stocked in one size only.

Your Pricing

Material Only

Price on request
Call our Bolton showroom
905-872-7557

Glazed Porcelain ·

SKU

Need Professional Installation?

Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

Book a Free In-Home Estimate for Tiles →

No obligation · Final price confirmed in writing

Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Verified Product Data
Bolton Showroom

More Colours in This Range

Brick Style OrangeOrange2.3″ x 10″$6.13 / sq ftTerracotta tone

Pricing for this product is confirmed by the store.

Please call us at 905-872-7557 or visit the Bolton showroom and we will confirm the current price and availability for you right away. The free in-home estimate below is unaffected.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.

CollectionBrick Style
ColourWhite
Product TypeGlazed Porcelain tile
LookBrick look — fired-clay face in a slim wall format
Stock Options2.3″ x 10″ Matte
Selected Size
Actual Dimensions
Finish
Edge ProfileNon-rectified — set with a slightly wider grout joint
Shade VariationV-3 — moderate variation between pieces
Thickness
SKU
Coverage / Box
Pieces / Box
Water Absorption< 0.5% — ISO 10545-3, conforms
Bending / Breaking Strength> 1300 N — ISO 10545-4, conforms
Chemical Resistancemin. UB — ISO 10545-13, conforms
Frost ResistanceRequired — ISO 10545-12, conforms
Stain Resistance> Class 3 — ISO 10545-14, conforms
Surface Abrasion (PEI)Not specified — the published test table does not include a surface abrasion class.
Slip ClassNot specified.
Application / Use
Approved Use —
Suitable ForWalls — interior. Not rated for floors.
Material Price
Professional InstallationAvailable — contact us for a tile installation estimate
1

A Wall Tile, Stated Plainly

The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.

2

White that throws a shadow

Flat white tile disappears; painted brick has depth. This face keeps the shallow relief of a limewashed brick, so the same wall reads differently at breakfast and under lamplight. It is still a glazed porcelain surface, so a splash of oil behind the hob wipes off rather than soaking in.

3

Published Test Results

The manufacturer tests this series against 5 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); bending / breaking strength > 1300 N (ISO 10545-4); chemical resistance min. UB (ISO 10545-13); frost resistance Required (ISO 10545-12); stain resistance > Class 3 (ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.

Professional Installation

How we install your tile

Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

01

Substrate Preparation & Flatness

This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.

02

Tonal Blending Across Boxes

This series is rated V-3, so pieces differ noticeably in tone and figure. That variation is what stops a large area looking printed, but it has to be spread rather than left where it falls. We open several boxes, dry-lay, and blend across the room instead of working carton by carton, planning where the cuts land at the same time.

03

Mortar, Setting & Levelling

Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.

04

Grout, Protection & Finishing

Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Brick Style White tile surface detail
BW

Visual Character

White that throws
a shadow

Flat white tile disappears; painted brick has depth. This face keeps the shallow relief of a limewashed brick, so the same wall reads differently at breakfast and under lamplight. It is still a glazed porcelain surface, so a splash of oil behind the hob wipes off rather than soaking in.

Brick Style White tile installed in a finished room
White

In the Room

White in the room.
See it full size in Bolton.

In the official scene it wraps a room floor to ceiling and stays quiet — the texture shows only where light rakes across it, which is exactly the point.

Before You Buy

Choosing, buying and installing Brick Style White

Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.

1

Will it suit my room?

Kitchen splash walls, bathroom and laundry walls, hallways, chimney breasts and stairwells. It is a wall tile only — not rated for floors.

This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.

Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.

2

How much should I order?

Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.

Coverage is per box for the option you have selected. The calculator above works out your box count.

Order the whole job at once. A later top-up from a different production run will not match — this is a V-3 tile and the variation between runs is real.

3

See it before you commit

Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.

Expect real piece-to-piece variation. At V-3 that variation is moderate — enough to read as stone rather than as print.

Bright white grout dissolves the joints and gives you a soft textured plane; a pale grey joint keeps every brick outlined and makes the pattern legible from across the room. Both are right — decide which of the two effects you actually want.

4

How does it get installed?

Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.

Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.

Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.

Long-Term Performance

Care & Maintenance

○

Everyday Cleaning

Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.

∣

Spills & Stains

Water absorption is tested to < 0.5% and the series is reported as conforming for stain resistance at > Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.

△

Traffic & Protection

Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.

☐

Grout, Long Term

The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.

Common Questions

Frequently Asked Questions

Does white brick tile look dated?

Painted-brick walls have been in continuous use for long enough to stop being a trend. What dates a wall is the grout choice and the layout, not the tile: a standard half-offset with a matched joint stays neutral, while heavy contrast grout ties the wall to a particular moment.

How do I keep the texture from collecting kitchen grease?

The relief here is shallow and glazed, so it wipes with a cloth and a pH-neutral cleaner. The grout is the part that holds grease, which is why we recommend sealing the joints behind a cooking zone and quote it with the installation.

Why is this listed with no published price?

Our current price book carries only one colour for this series, so we will not publish a figure for the white that we cannot trace to it. Call the Bolton showroom on 905-872-7557 and we will confirm the current price and availability before you commit to anything.

What does V-3 shade variation mean?

V-3 means moderate variation: pieces differ noticeably in tone and figure, the way real stone does, without the extremes of a V-4. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.

Can this tile be used outdoors?

No — we only supply it for interior work. Frost resistance is tested and reported as conforming, which people often read as an outdoor green light, so it is worth being precise: surviving a freeze is only one of the things an exterior tile has to do. The manufacturer does not list this series for outdoor use, and it publishes no slip class for it, which matters more than frost on a wet step or a patio. Several other ranges we carry are approved for exterior work — ask us and we will point you at them.

How slippery is it underfoot?

We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.

How much tile should I order?

Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.

Can I use this on a floor?

No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.

Do I need mortar, grout or a membrane with this tile?

Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.

Can The Flooring Mart provide a tile installation estimate?

Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.

Can I see this range at the Bolton showroom before deciding?

Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.

02

Tile Set by Our Own Crew

Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.

03

Transparent Pricing

Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.

Product Warranty

The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.

Free In-Home Estimate

See it in your home before you decide

We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.