
SKU GW.BT.ORG.2,3X10
A rust-orange fired brick face — the warmth of a reclaimed wall, on a tile you can wipe clean. · brick look wall tile


Quick Summary About the Product
Orange is Brick Style at its most honest: a burnt terracotta face with the pitting, scorch marks and tonal drift of brick that has been standing for decades. It is a glazed porcelain wall tile in a slim 2.3″ x 10″ brick format, so a whole wall goes up with real mortar joints and none of the dust, weight or sealing a reclaimed brick slip would demand. It is stocked in 2.3″ x 10″ in a matte finish.
How this tile lives: It belongs on the wall that needs to warm a room down — behind a range, up a chimney breast, along a basement bar, or across a feature wall in an open-plan living space where everything else is white and flat.
More in this series: Brick Style White
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU GW.BT.ORG.2,3X10
Matte is the only finish produced in this range. This colour is stocked in one size only.
WALL USE ONLY — the manufacturer does not approve this option for floors.
Your Pricing
Material Only
Glazed Porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $6.13 / sq ft.
Each box covers 5.16 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 5.16 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Brick Style |
| Colour | Orange |
| Product Type | Glazed Porcelain tile |
| Look | Brick look — fired-clay face in a slim wall format |
| Stock Options | 2.3″ x 10″ Matte |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Non-rectified — set with a slightly wider grout joint |
| Shade Variation | V-3 — moderate variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | < 0.5% — ISO 10545-3, conforms |
| Bending / Breaking Strength | > 1300 N — ISO 10545-4, conforms |
| Chemical Resistance | min. UB — ISO 10545-13, conforms |
| Frost Resistance | Required — ISO 10545-12, conforms |
| Stain Resistance | > Class 3 — ISO 10545-14, conforms |
| Surface Abrasion (PEI) | Not specified — the published test table does not include a surface abrasion class. |
| Slip Class | Not specified. |
| Application / Use | |
| Approved Use | — |
| Suitable For | Walls — interior. Not rated for floors. |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.
Real reclaimed brick is heavy, porous and permanently dusty. This is a glazed porcelain face that photographed a brick and kept only the good parts: the colour drift, the surface pitting, the irregular edge. It wipes clean behind a stove, it does not shed, and its water absorption is tested below 0.5 per cent.
The manufacturer tests this series against 5 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); bending / breaking strength > 1300 N (ISO 10545-4); chemical resistance min. UB (ISO 10545-13); frost resistance Required (ISO 10545-12); stain resistance > Class 3 (ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.
This series is rated V-3, so pieces differ noticeably in tone and figure. That variation is what stops a large area looking printed, but it has to be spread rather than left where it falls. We open several boxes, dry-lay, and blend across the room instead of working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
Real reclaimed brick is heavy, porous and permanently dusty. This is a glazed porcelain face that photographed a brick and kept only the good parts: the colour drift, the surface pitting, the irregular edge. It wipes clean behind a stove, it does not shed, and its water absorption is tested below 0.5 per cent.

In the Room
The official scene runs it floor to ceiling behind simple furniture, and the wall does all the decorating on its own — no artwork, no colour on the other walls, nothing competing.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Feature walls, chimney breasts, kitchen splash walls, basement bars and stairwells. It is a wall tile only — not rated for floors.
This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-3 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-3 that variation is moderate — enough to read as stone rather than as print.
A warm sand or buff grout reads like genuine lime mortar and lets the orange breathe. Grey grout cools the whole wall down and fights the terracotta — worth avoiding here.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is tested to < 0.5% and the series is reported as conforming for stain resistance at > Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
One wall, no. The colour is muted and earthy rather than bright, and the tonal drift stops it reading as a single block of orange. What does overwhelm a small room is orange on more than one plane — keep it to a single wall and leave the others plain.
Anything in the off-white, mushroom and putty family, plus deep greens and inky blues. Natural oak and walnut both sit well against it. Avoid pink-based whites, which turn the brick muddy, and avoid competing warm reds.
No. The manufacturer publishes this range for walls only, and we will not stretch that into a floor claim. If you want the same brick language underfoot, ask us about the ranges that carry a floor rating and we will bring samples of both to your estimate.
V-3 means moderate variation: pieces differ noticeably in tone and figure, the way real stone does, without the extremes of a V-4. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
No — we only supply it for interior work. Frost resistance is tested and reported as conforming, which people often read as an outdoor green light, so it is worth being precise: surviving a freeze is only one of the things an exterior tile has to do. The manufacturer does not list this series for outdoor use, and it publishes no slip class for it, which matters more than frost on a wet step or a patio. Several other ranges we carry are approved for exterior work — ask us and we will point you at them.
We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
Product Warranty
The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close