Skip to content
Flooring Guide · 22 Minute Read

Solid Hardwood Flooring, Explained

What a solid board is, how wood reacts to the seasons, where solid hardwood fits, and how to care for it and renew it. We explain it the way we do in our Bolton showroom.

To see products, browse our solid hardwood collection, or price your rooms in the installation calculator.

Written by The Flooring Mart Inc. · Published · Last updated

Start here

What is solid hardwood flooring, and where does it work best?

The short answer

Solid hardwood is made of boards that are each one piece of wood, from the top face to the underside. It is usually nailed to a wood subfloor. It suits rooms at or above ground level, such as living rooms, dining rooms, bedrooms and halls. Wood swells and shrinks as the air in your home gets more or less humid. So solid hardwood needs steady indoor conditions, and the installation its maker asks for. When its finish wears, it can be renewed, and the floor can be sanded and refinished.

Who this guide helps

Homeowners choosing solid hardwood for living areas, bedrooms or halls. Also anyone weighing solid against engineered hardwood, or wondering whether an older hardwood floor can be refinished.

The basics

What is solid hardwood flooring?

Solid hardwood flooring is made of boards that are each one piece of wood, from the top face to the underside. Boards usually have a tongue on one edge and a groove on the other, so they fit together. They are usually nailed or stapled through the tongue to a wood subfloor.

A solid hardwood board, cut across The end of a solid hardwood board, drawn larger than life. It is one piece of wood from the top face to the underside, with the wood grain running through its whole thickness. A thin finish coats the top face. A tongue sticks out of the right edge and a groove is cut into the left edge, so neighbouring boards fit together. The wood between the top face and the tongue is marked: sanding during a refinish removes some of this wood each time. Finish Protects the top face Wood above the tongue Sanding removes some Tongue Fits the next groove One piece of wood Top to bottom Groove
The end of a solid hardwood board, drawn larger than life. The whole board is one piece of wood, from the top face to the underside. A thin finish protects the top face. The tongue on one edge fits into the groove of the next board. The wood above the tongue is what a full sanding works through. Each sanding removes some of it. So before a floor is sanded again, a professional checks how much is left, along with other things. Real boards differ from product to product.

Engineered hardwood is real wood too: a real-wood top layer bonded to layers of wood or another core. It is not a lesser copy. It handles changes in humidity better, and many engineered floors can go where solid cannot, such as on concrete or in a basement. Our engineered hardwood guide explains it.

“Hardwood” names a group of trees with broad leaves; it is not a measure of hardness. Some softwoods are harder than some hardwoods.

What solid hardwood offers

Strengths
  • One piece of real wood, from top to bottom
  • It can be sanded and refinished many times, according to the wood flooring industry
  • Many species, grades, widths and finishes

What to check first

Before you choose
  • The room: at or above ground level, and not a bathroom with a shower or tub
  • The subfloor: wood, flat and dry
  • Indoor humidity: kept in the range its maker sets, all year
Our rangeOur solid hardwood is 3/4 inch thick and comes prefinished, in widths from 2-1/4 to 4-3/4 inches. Most of it is red oak or hard maple, with some white oak, hickory, walnut and acacia. Browse our solid hardwood collection.
Choosing the look

How do species, grade, width and finish change a floor?

The species sets the grain and the natural colour, and a stain can change the colour. The grade sets how much natural character shows, and the width and finish change how the floor looks and how it wears.

Species and colour

Each species has its own grain and colour, but no species is one exact colour. Lighter sapwood and darker heartwood can sit side by side, and colour varies from tree to tree. Boards are laid out from several boxes so the colours mix. So judge a floor from several boards or a large sample, not one photo.

Grade means appearance, not strength

Under the industry’s grading rules, a grade describes how a floor looks. It covers how much the colour varies. It also covers how many knots, mineral streaks and other natural marks the floor has. Mineral streaks are dark streaks left by minerals in the wood. Grades can also set board lengths. A grade does not measure strength or quality: under the rules for unfinished oak, all grades are equally strong and serviceable.

The industry’s grades for unfinished oak flooring, from the fewest natural marks to the most. Each grade allows the marks of the grades above it.
GradeWhat you see
ClearThe fewest natural marks
SelectSome natural marks and colour variation
No. 1 CommonMore knots and marks: a more varied look
No. 2 CommonThe most natural character, for rooms where marks are wanted

Prefinished floors often use their maker’s own grade names, which follow that maker’s definitions. Our product pages show the grade where its maker publishes one; otherwise ask us. Look at real boards from the grade you like.

Width and thickness

Solid flooring is traditionally 3/4 inch thick. Boards under 3 inches wide are called strip, and boards 3 inches or wider are called plank. Wider boards move more with the seasons. The wood flooring industry gives an example. If a 5-inch red oak board’s moisture content changes by 4 percentage points, the board can shrink or swell by about 1.9 mm (0.074 inch) across its width. Wider boards also call for steadier conditions and closer moisture checks.

Texture, finish and sheen

Textures such as hand-scraped give the boards an aged look; sanding the floor later removes them. A prefinished floor was finished at the factory and can be walked on as soon as it is installed. A site-finished floor is installed raw, then sanded and finished in your home. It offers the widest choice of colour and finish, and it needs days to dry before rugs and furniture go back.

Some finishes are surface coats: water-based, oil-based, UV-cured, and factory finishes containing aluminium oxide. Others are oils and hard-wax oils that soak into the wood. Each needs its own care products. Sheen runs from gloss through semi-gloss and satin to matte; a lower sheen makes small scratches and everyday wear less noticeable.

Rooms

Which rooms suit solid hardwood?

Solid hardwood belongs in rooms at or above ground level. It should not go below grade, as in a basement, unless its maker recommends it. And it is not for a bathroom with a shower or tub.

Room by room. The product’s own instructions decide.
RoomSolid hardwood?What to know
Living room, dining room, bedroomsYesAt or above ground level, with steady indoor humidity.
HallsYesAt or above ground level, with steady indoor humidity.
EntrancesWith careWet footwear and tracked-in snow arrive here, so use mats and wipe up water promptly. Many entries are tiled instead, as in our Caledon East project.
KitchenYes, with careWipe up spills at once and put a rug in front of the sink.
BathroomNot with a shower or tubA powder room only where the product’s maker allows it.
Laundry roomNot recommendedA washer can leak, and water reaching the underside of the boards makes them cup. Tile, or a vinyl approved for laundry rooms, suits it better.
Basement (below grade)No, unless its maker recommends itA floor is below grade when it sits 3 inches or more below the ground outside. See which floor is right for floors made for basements.
Over concreteOnly with a planSolid is fastened to wood, so a slab needs a wood subfloor system or a glue-down method its maker approves.
Over in-floor (radiant) heatOnly if its maker approves that productThe maker must approve that exact floor for in-floor heat, and the floor must be installed and run within the maker’s limits, such as the highest temperature at its surface. Some makers do not approve their solid hardwood over in-floor heat, so we check the product’s own documents before we quote.
CondoAsk your building firstYour building’s rules decide what you may install, and may set a sound rating. That rating belongs to the whole floor and ceiling, not one layer.

Pets and children

Good to know
  • A dent and a scratch are different: a harder species resists dents, while everyday scratches sit in the finish
  • A lower sheen makes small scratches less noticeable
  • Keep claws trimmed, use mats and felt pads, and wipe up pet accidents quickly: urine can stain wood permanently

Before you choose

Check
  • The maker’s humidity range and warranty conditions
  • The floor height at doors and next to other floors
  • Stairs and transitions, planned with the floor

To see solid hardwood in a finished home, look at our Caledon East project. It has dark solid hardwood through the upper hall, with both staircases refinished and a tiled entry.

Moisture

Why does solid hardwood move with the seasons?

Wood takes in and gives off moisture until it matches the air around it. As it does, it swells and shrinks, mostly across the width of each board. A finish slows this down but cannot stop it.

How much moisture wood holds at about 21 °C, from the USDA Wood Handbook (Table 4-2). Real values vary by species and by board.
Humidity of the airMoisture in the wood, about
30%6%
40%8%
50%9%
60%11%

Gaps, cupping and crowning

In dry winter air, boards lose moisture and thin gaps can open between them; in humid summer weather they close again. Gaps that open and close with the seasons are normal. Ask for a professional opinion if gaps are large or stay open through the humid months.

Cupping means the edges of each board sit higher than its centre; crowning means the centre sits higher than the edges. Both come from uneven moisture through the board. Cupping happens when the underside is wetter, for example from moisture below the floor or water reaching the underside. Crowning happens when the top is wetter. The fix starts with the cause: stop the moisture and let the floor even out before any repair. It often flattens again, and sanding is only for what remains afterwards.

Keeping indoor conditions steady

The wood flooring industry’s general guide for solid hardwood is 30% to 50% relative humidity at 16 to 27 °C. But each maker sets its own range, often as a condition of the warranty. The instructions we reviewed say 30–50% and 35–55%. Health Canada advises keeping indoor humidity between 30% and 50% to limit mould. A humidifier in the heating season, and a dehumidifier or air conditioning in summer, keep the air in range.

Acclimation: readings, not days

Acclimation means making sure the flooring and the home are ready for each other. The wood flooring industry’s current guidelines measure it rather than counting days. The installer records the room’s temperature and humidity, and the moisture in the flooring and the subfloor. When the flooring already matches normal living conditions, its maker’s requirements and the subfloor, it can be installed straight away. Otherwise it is conditioned first. Heating and cooling should run for at least five days before the flooring arrives. Makers add their own minimums, such as boxes resting in the room for a set time.

The subfloor and the flooring should also be close in moisture. As a rule of thumb, a wood subfloor’s moisture content should be no more than 4 percentage points higher than strip flooring’s. For plank flooring, the subfloor should be no more than 2 points higher than the planks. Strip boards are under 3 inches wide, and planks are 3 inches or wider. A floor is never installed over a known moisture problem.

Durability

How hard-wearing is solid hardwood?

A dent and a scratch are different things. A dent is wood crushed by force, such as a heel, a dog’s claw or a chair leg. A finish barely changes how easily wood dents. A surface scratch sits only in the finish; a deep scratch goes through the finish into the wood.

What the Janka number means

The Janka test measures how hard it is to press a small steel ball halfway into a piece of wood. The ball is 11.28 mm (0.444 inch) across. A higher number means the species resists dents better. It does not measure the finish or how easily a floor scratches, and it does not apply to engineered flooring.

Janka hardness, in pounds of force (lbf), of species we sell. These are average values for clear wood at 12% moisture, from the USDA Wood Handbook (2021). Individual boards can differ from these averages by 20% or more, and our product pages quote their makers’ figures, which can differ slightly.
SpeciesJanka hardness
Red oak (northern red oak)1,290 lbf
White oak1,360 lbf
Hard (sugar) maple1,450 lbf
Hickory1,820 lbf for pecan hickory; 1,810 to 2,140 lbf for the true hickories

Hardness is one factor among several. The finish takes the everyday scratches, and a lower sheen makes small scratches less noticeable. The hardest species is not automatically the best choice for a room.

Everyday protection

  • Felt pads under furniture, checked and replaced as they wear.
  • Lift heavy furniture rather than sliding it; move appliances on glides or a sheet of plywood.
  • Barrel-shaped or wide casters on chairs.
  • No sports cleats or spiked heels, and pet claws kept trimmed.
  • Doormats and breathable rugs at the doors.

Light and colour

Light changes the colour of wood over time, and some species change more than others. A rug that never moves leaves a patch of a different colour, so move rugs now and then. Window coverings and UV-filtering film help.

The warranties we reviewed do not cover scratches, dents or gouges, including those from pets, heels or grit. So read your product’s warranty before you choose.

Installation

How is solid hardwood installed?

Conventional solid hardwood is nailed or stapled through the tongue to a wood subfloor. It is glued down only where its maker approves. It is never floated unless its maker recommends and warrants that. So the instructions for click floors do not apply to it.

The subfloor

The subfloor sets the limit for the whole floor: new flooring does not stiffen a weak one. It has to be a dry, flat wood subfloor. Its thickness has to suit the spacing of its joists (the beams under it). The industry’s guidelines set a flatness limit for nail-down solid with fasteners 1-1/2 inches or longer. The subfloor may vary by no more than 3/16 inch over 6 feet, or 1/4 inch over 10 feet, unless the maker is stricter. The floor has to be flat; it does not have to be level.

Concrete

Solid hardwood is fastened to wood, so a concrete slab needs a plan. One plan is a wood subfloor system over a vapour retarder, a sheet that slows moisture. The other is a glue-down method the flooring’s maker approves. Not every solid floor may be glued to concrete, and some makers do not recommend their solid floors over concrete at all. A subfloor system also raises the floor, so doors and transitions are checked.

Room to move, transitions and stairs

A gap is left at the walls and around fixed objects so the floor can expand. The industry’s general rule is a gap as wide as the floor is thick. Makers set their own, and we have seen 1/2 inch and 3/4 inch. Baseboard or shoe moulding covers the gap and is nailed to the wall, not to the floor.

Reducers and thresholds join floors of different heights; T-mouldings join floors of the same height, for example in a doorway. Stairs are assessed on their own. Treads, risers and nosings (the rounded front edges of the treads) are separate pieces. Local building rules govern stair dimensions. See our stair renovations.

Instructions and warranty

A maker’s warranty depends on following its instructions for moisture testing, conditioning, installation and care. It also depends on keeping the floor in its humidity range.

Who installs itInstallation is completed by The Flooring Mart’s own in-house installation teams. We do not use subcontractors, which is why we can stand behind our flooring installation work with a 2-year limited workmanship warranty.
Care

How do I look after solid hardwood, and can it be refinished?

Sweep or dust-mop often, and vacuum on the hard-floor setting with the beater bar off. Wipe up spills at once, and clean only with the product your floor’s maker recommends.

Makers differ on damp mopping, so follow your floor’s care guide, and never leave liquid standing on the floor.

Never use these on a wood floor

A steam cleaner or steam mop: the wood flooring industry warns that steam damages wood and its finish.

Vinegar; oil soaps on a urethane or other film finish; wax on a finish that was never waxed.

Products sold to restore, rejuvenate or add shine, unless your floor’s maker recommends them.

Cleaners made for vinyl or tile, or a traditional mop and bucket.

Recoating and refinishing

Two ways to renew a wood floor
Maintenance coat (recoat)Sand and refinish
What happensThe old finish is cleaned and lightly abraded, then a fresh coat goes onThe floor is sanded to bare wood and finished again
When it suitsA floor that looks dull, with sound woodDeep scratches, dents, finish worn through, or a change of colour
What it uses upOnly finishA thin layer of wood each time

On a factory finish, ask its maker whether, and with what, it can be recoated.

The wood flooring industry says solid hardwood can be sanded and refinished numerous times, but no one can promise a number. Each full sanding removes a thin layer of wood; the industry’s magazine puts a traditional sanding at about 1/32 to 1/16 inch. How many sandings a floor has left depends on the wood still above the tongue and how carefully earlier sandings were done. Deep damage and how the floor was made matter too. Factory-finished boards have slightly angled edges (bevels), for example, and removing them takes extra wood at the first full sanding.

Before sanding a factory-finished floor, check its warranty: for at least one maker, sanding ends the finish warranty. Textures such as hand-scraped are lost when a floor is sanded.

Repairs

Small scratches can be touched up with a colour-matched kit. A badly damaged board can be cut out and replaced without disturbing its neighbours. The new board should match the species, grade, width, thickness and edge, and be close to the floor in moisture. Keep a few spare boards from your order for this.

Costs

What does a solid hardwood floor cost?

The price depends on the species and grade, the board size, the finish, the installation method and the floor underneath. Taking up the old floor adds to it, and so do trims, stairs and delivery.

What goes into a solid hardwood price. Our figures are read from the calculator when this page is published.
Part of the priceWhat changes itOur prices
FlooringSpecies, grade, width and finishFrom $5.49 to $7.49 per sq ft
Installation, nail-downFastened to a wood subfloorFrom $2.99 per sq ft, with a minimum installation charge, from $1,250.00
Adhesive, where the maker approves itGlue assist (adhesive along with the nails), or full-spread adhesive (glue over the whole subfloor)$0.99 or $1.95 per sq ft
Taking up a nail-down wood floorOther old floors are priced differently$2.25 per sq ft, then disposal at $0.35 per sq ft, or a bin on site instead, from $350.00
Subfloor workFlattening, a second layer, moisture protection, a subfloor system over concretePriced once we see the floor
Trims, transitions and stairsBaseboard and shoe moulding; transitions; stair piecesBaseboard and shoe moulding in the calculator; transitions and stairs quoted with your project
DeliveryThe distance to your addressA flat charge, confirmed with your address; always the last line
HST13% in OntarioShown on its own line, after the subtotal before HST

Installation figures are starting prices, and the calculator confirms them for your address. A wood floor also has later costs: maintenance coats and, one day, refinishing. Our cost guide explains every line of an estimate, and the installation calculator prices your own rooms.

Comparing

Should I choose solid or engineered hardwood?

Both are real wood. Solid is one piece; engineered is layered, which makes it more stable. The choice usually comes down to where the floor is going.

Solid and engineered hardwood, side by side. The product’s own instructions decide.
Solid hardwoodEngineered hardwood
Made ofOne piece of woodA real-wood top layer over a wood or composite core
Movement with humidityMore, and more in wider boardsGenerally more stable
Where it can goAt or above grade; below grade only if its maker recommends itAbove, on or below grade, by product
InstallationNailed or stapled; glued only where approved; floated only if its maker allows itNailed, glued or floated, by product
Over concreteA wood subfloor system, or an approved glue-downGlued or floated, by product
Sanding and refinishingNumerous timesDepends on the thickness of its top layer

A good fit when…

Solid hardwood suits you when
  • The rooms are at or above ground level, over a wood subfloor
  • You want a floor that can be sanded and refinished again and again
  • You can keep indoor humidity steady all year

Check carefully when…

Look again when
  • The floor is concrete, or below grade: an engineered floor made for it may suit
  • Your building has sound or installation rules
  • You want wide boards and humidity is hard to control

A bathroom with a shower or tub needs tile or a vinyl approved for bathrooms. Wood floors, solid or engineered, are not recommended there.

Our engineered hardwood guide covers layered floors, and which floor is right for my home compares five floors.

Choosing

What should I check before I order?

Choose from real boards rather than one photo, with the maker’s instructions in hand.

Common buying mistakes

  • Choosing from a single small sample or a photo on a screen.
  • Reading the grade as a measure of quality instead of appearance.
  • Planning solid for a basement, for a bathroom with a shower or tub, or over concrete without a plan.
  • Counting days instead of measuring moisture before installation.
  • Choosing the hardest species and expecting it to stop scratches.
  • Ordering without enough for cuts and a few spare boards.
  • Cleaning with steam or vinegar.

Sample-shopping checklist

  • Look at several boards from more than one box, in your own light.
  • Compare the grade’s colour range and natural marks with the look you want.
  • Check the width and thickness against your rooms and floor heights.
  • Ask for the maker’s humidity range, and decide whether you can keep it all year.
  • Check the finish, its sheen and the care products it needs.
  • Read the warranty’s conditions and exclusions.
  • Confirm the installation method for your subfloor.

Print this list (your browser’s Print command prints the guide without the menu) and bring it to the showroom.

Questions to ask before ordering

  • Is every room at or above ground level, over a wood subfloor?
  • Which moisture readings will be taken, and when?
  • What humidity range does the maker require, and is it a condition of the warranty?
  • Which installation method does the maker approve for my floor?
  • How will the new floor meet stairs, doors and other floors?
  • How many spare boards should I keep?
  • Which care products does this finish need?

Bring them to our Bolton showroom, or call 905-872-7557.

How we checked

Sources we checked

The technical statements on this page follow these sources. Where products differ, the product’s own instructions and warranty decide. No paid standard was read.

  1. National Wood Flooring Association (NWFA), Wood Flooring Installation Guidelines (revised 2025): definitions, grade levels, jobsite conditions, acclimation and moisture testing, subfloors and concrete, installation methods, expansion space, care and repairs; reviewed 3 November 2026.
  2. NWFA, woodfloors.org (types of wood floors, finishes, maintenance, problem prevention, refinishing and durability), and the NWFA/NOFMA grading rules for unfinished solid wood flooring (2018); checked 3 November 2026.
  3. Hardwood Floors (NWFA’s magazine), How Many Times Can a Wood Floor Be Sanded? (2025, updated 2026), checked 3 November 2026.
  4. USDA Forest Products Laboratory, Wood Handbook (2021): the structure of wood (chapter 3), moisture in wood (chapter 4) and hardness by species (chapter 5), checked 3 November 2026.
  5. Hardwood Manufacturers Association, An Expert’s Guide to Hardwood Flooring (textures), checked 3 November 2026.
  6. Maple Flooring Manufacturers Association, bulletin on cupping and crowning; Health Canada, guide to addressing moisture and mould indoors; checked 3 November 2026.
  7. Condominium Authority of Ontario, Rules, checked 2 November 2026.
  8. Manufacturers’ installation instructions, specifications, care guides and warranties for solid hardwood (several brands), reviewed 3 November 2026.
Questions

Solid hardwood questions

Short answers. For your own rooms, call 905-872-7557 or visit the showroom.

What is solid hardwood flooring?

Flooring made of boards that are each one piece of wood, from the top face to the underside. The boards are traditionally 3/4 inch thick, with a tongue and a groove on their edges. They are usually nailed or stapled to a wood subfloor, or glued where the maker approves. Ours comes prefinished.

How is solid hardwood different from engineered hardwood?

Solid is one piece of wood; engineered is a real-wood top layer bonded to a core of wood layers or another material. Both are real wood. Engineered is generally more stable and can go in more places, such as on concrete or below grade where its maker allows. Solid can be sanded and refinished numerous times.

Can solid hardwood go over in-floor heating?

Only when the flooring’s maker approves that exact product for in-floor heating, and the floor is installed and run within the maker’s limits, such as the highest temperature at its surface. Some makers do not approve their solid hardwood over in-floor heat. We check the product’s own documents with you before we quote.

Can solid hardwood go in a basement?

Not usually. The wood flooring industry’s guidelines put solid hardwood at or above grade, and below grade only if the flooring’s maker recommends it. A floor is below grade when it sits 3 inches or more below the ground outside.

Does hardwood need to acclimate before it is installed?

It needs to match its home, and that is measured rather than counted in days. The installer checks the room’s temperature and humidity, and the moisture in the boards and the subfloor. When they match the maker’s requirements, the floor can go in. Heating and cooling should run for at least five days before delivery, and makers add their own minimums.

Why do gaps appear between hardwood boards?

In dry winter air, wood loses moisture and shrinks, so thin gaps open between boards; they usually close again in the humid months. Seasonal gaps are normal. Keeping indoor humidity in your floor’s range keeps them small; ask a professional if gaps are large or stay open all year.

Why is my hardwood floor cupping?

Cupping is when the edges of the boards sit higher than their centres. It means the underside is wetter than the top, often from moisture below the floor or water reaching the underside. Find and stop the moisture first, then let the floor even out before any repair; it often flattens again.

Which hardwood suits a home with dogs?

Every wood floor can scratch, so choose for how it will look as it wears. A harder species resists dents better, and a lower sheen makes small scratches less noticeable. Keep claws trimmed, put mats at the doors, and wipe up accidents quickly: urine can stain wood permanently.

Can solid hardwood go over concrete?

Only with a plan. Solid is fastened to wood. So a slab needs a wood subfloor system over a vapour retarder, or a glue-down method the flooring’s maker approves. Not every solid floor may be glued to concrete, and some makers do not recommend their solid floors over concrete.

How do I know whether my floor can be refinished?

It depends on how much wood is left above the tongue and how carefully it was sanded before. Deep damage and how the floor was made matter too. A floor that only looks dull may need just a maintenance coat. On a factory finish, ask its maker whether it can be recoated. Have a flooring professional look at it before you decide.

Should I choose prefinished or site-finished hardwood?

Prefinished is finished at the factory, so you can walk on it as soon as it is installed. Site-finished is sanded and finished in your home. It offers the widest choice of colour and finish, and it needs days to dry before rugs and furniture go back. Our solid hardwood is prefinished.

Does a higher Janka rating mean fewer scratches?

Not on its own. The Janka test measures how well a species resists dents, not scratches. Everyday scratches sit in the finish, and a lower sheen makes them less noticeable.

Can I steam-mop a hardwood floor?

No. The wood flooring industry warns that steam damages wood and its finish. Clean with the product your floor’s maker recommends, and never leave liquid standing on the floor.

What humidity should I keep for hardwood floors?

The range your floor’s maker sets, all year. The industry’s general guide for solid hardwood is 30% to 50% relative humidity. Makers set their own ranges, often as a warranty condition. A humidifier in winter and a dehumidifier or air conditioning in summer help.

See solid hardwood in person

Compare species, grades and finishes in our Bolton showroom, then book a free estimate to confirm your floor.