Skip to content
Sphere 5mm glue down vinyl flooring room scene
Bolton, Ontario
5mm Glue Down SPC Plank20 Mil Wear Layer30-Yr Residential Warranty

Sphere

Light greige oak — soft grey over warm sand

$5.49 / sq ft

Material only

$3.49/ sq ft

Book a Free Estimate
Sphere SKU SPHERE
Material$5.49$3.49 / sq ft
Supply & InstallCalculate your project estimate
Get a Quote
␣Image loading…
Sphere 5mm glue down vinyl flooring room scene
Sphere — Room Scene
Sphere — Floor Detail
Sphere — Surface View

Quick Summary

Sphere is a light greige oak — a soft veil of grey over a warm sand base that bridges modern and cosy in one surface. It brightens rooms without turning cold, flatters both palettes of furniture, and its glue-down construction keeps the wide surface silent and solid in open-plan spaces.

Ideal for

Open plans · Condominium renovations · Offices · Living rooms · Transitional and contemporary interiors

At a Glance

7″ × 48″Plank Size
5 mmTotal Thickness
Waterproof SPCCore
Direct GlueInstallation
18.67 sq ft / boxCoverage
20 MilWear Layer

Certified Performance

WATERPROOF100% Waterproof
VOCFREEFloorScore
30 YRRES · 8 COMVerified Warranty

100% waterproof describes the vinyl itself: getting wet does not damage it. Water left standing, a leak or a flood can still reach the subfloor through the joints and edges, so wipe up standing water promptly — the manufacturer’s warranty sets which water damage is covered.

Accessories

Accessory Note for Glue-Down Floors

The manufacturer of this glue-down line does not produce matching T-mouldings, reducers, or stair nosings — accessories for glue-down installations vary by project and are custom-selected to suit the transition heights and finishes on site. Our team confirms the right transition profiles for your project at your free in-home estimate.

5mm Glue Down SPC Plank · 20 Mil Wear Layer · Embossed · Micro-Groove Bevel · Direct Glue

Sphere

Light greige oak — soft grey over warm sand · SKU SPHERE

Your Pricing Options

Material Only

Regular: $5.49 / sq ft

$3.49 / sq ft

Box coverage: 18.67 sq ft  ·  ~$65.16 / box

Glue-down products reward professional installation — ask about our full service, backed by our 2-year limited workmanship warranty.

Need Professional Installation?

Glue-down vinyl depends on subfloor preparation and correct adhesive work. Our installers handle assessment, adhesive, installation, and transitions — backed by a 2-year limited workmanship warranty.

Supply & Install

Calculate your project estimate

Glue-down installation pricing depends on subfloor condition and adhesive method, so it is confirmed in writing at your free in-home estimate.

  • ✓Material supply
  • ✓Adhesive & professional installation
  • ✓2-Year limited installation workmanship warranty

Any required subfloor preparation will be assessed and confirmed in your estimate.

Book a Free In-Home Estimate →

No obligation

Estimates are based on standard conditions. Complex layouts, subfloor issues, or moisture remediation may affect final cost — always confirmed in writing before any work begins.

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the boxes and material cost at today’s price of $3.49 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 18.67 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Or call us: 905-872-7557

Free In-Home Estimate
100% Waterproof
Bolton Showroom

Technical Specifications

Confirmed specifications only — verified from the official specification sheet and product page.

SKU / ColourSPHERE
Plank Size7.01″ × 48.03″ (178 × 1220 mm)
Total Thickness5 mm
Core MaterialSPC (Stone Plastic Composite) — 100% Waterproof
Wear Layer0.5 mm / 20 Mil
FinishEmbossed
Edge ProfileMicro-Groove Bevel
Installation MethodDirect Glue (glue-down) — per official installation guide
Recommended AdhesiveNot specified by manufacturer — see adhesive guidance below
CertificationFloorScore
UnderlaymentNone required — separate underlay not recommended for glue-down
Coverage / Box18.67 sq ft  ·  35 lbs
Residential Warranty30 Year Limited
Commercial Warranty8 Year Limited
Material Price$3.49 / sq ft  ·  ~$65.16 / box (18.67 sq ft)
Supply & InstallCalculate your project estimate. Supply & Install includes adhesive and our 2-yr limited installation workmanship warranty. Any required subfloor preparation will be assessed and confirmed in your estimate.
1

Fully Bonded, Completely Silent

Direct-glue installation bonds every plank to the subfloor — no hollow sound, no deflection, no movement. It is the construction of choice for commercial spaces, rolling loads, and anyone who wants a floor that feels structural.

2

20 Mil Commercial-Class Wear Layer

The verified 0.5 mm (20 mil) wear layer is a commercial-grade specification — comfortably above household demands and matched to the 8-year commercial warranty — finished with an embossed texture and micro-groove bevels.

3

Verified 30-Year Residential Warranty

A 30-year limited residential and 8-year limited commercial warranty are both verified from the official product documentation — unusually strong coverage at this price point, matched by FloorScore certification.

4

Official Installation Guidance Included

The manufacturer publishes a full installation guide — acclimation, subfloor standards, moisture limits, adhesive methods, and underfloor-heating rules — linked above as an official document, and followed exactly by our installation team.

5

Sharp Value

At $3.49 per sq ft, Sphere delivers waterproof SPC construction and a verified 30-year warranty at genuine value — with professional supply-and-install available. Installation is quoted in writing at your free in-home estimate.

6

Official Documents

The manufacturer’s official technical documentation for this floor — complete specifications, testing data, and installation requirements — is available for your review:
View Official Specification Sheet (PDF) ↗
View Official Installation Guide (PDF) ↗

Adhesive & glue guidance for Sphere

Sphere is a direct-glue floor — the manufacturer specifies glue-down installation, applied per the official guide: a 4″ adhesive strip at perimeters and thresholds for rooms under about 170 sq ft, a 4″ adhesive grid at 13-ft intervals for larger rooms, and a full adhesive spread in heavy-traffic areas. Material must acclimate flat in the room for at least 48 hours at 18–27°C before installation.

Where the manufacturer does not name a specific adhesive — as here — we commonly recommend MAPEI Ultrabond ECO 373, a universal pressure-sensitive adhesive widely used for LVT/LVP glue-down installations. The final adhesive choice always depends on your subfloor, site conditions, and the manufacturer’s requirements — our installer confirms suitability before installation begins.

Approximate coverage for Ultrabond ECO 373 is 125–185 sq ft per gallon on porous substrates using a 1/16″ × 1/16″ × 1/16″ square-notch trowel, and 185–245 sq ft per gallon on nonporous substrates using a 1/16″ × 1/32″ × 1/32″ U-notch trowel. Actual coverage varies with subfloor condition, trowel size, and installation method — we confirm quantities at your estimate rather than promising a number.

Whatever the adhesive, the subfloor must be clean, flat, dry, smooth, and properly prepared — moisture-tested to the official limits, with old adhesive residues mechanically removed and low spots levelled. This preparation, more than any other step, determines how a glue-down floor performs for the next thirty years.

Sphere 5mm glue down vinyl flooring detail view
Glue

Construction

Bonded to the building.
Built to stay.

Sphere is glued directly to the prepared subfloor — a 5 mm waterproof SPC construction that becomes part of the structure itself: silent, seamless, and rated for both homes and commercial traffic with verified 30-year residential coverage.

Outstanding Value

$3.49/sq ft.
Warranted for 30 years.

At $3.49 per sq ft, Sphere delivers 100% waterproof SPC construction, direct-glue stability, and a verified 30-year residential / 8-year commercial warranty. Professional supply-and-install is available, with the installation work backed by our 2-year limited workmanship warranty; any required subfloor preparation will be assessed and confirmed in your estimate. Installation is quoted in writing at your free in-home estimate.

Sphere glue down vinyl flooring in a furnished room
Sphere

Visual Character

Greige balance.
Warm or cool, solid always.

Sphere balances the temperature equation — grey enough to read current, warm enough to stay welcoming — and spreads it across a fully bonded surface that feels of a piece with the building itself.

Buying advice & styling guidance for Sphere

Sphere supports both directions: cream, tan, and natural woods draw out its warmth; grey, white, and black draw out its composure. Greige and warm-grey walls create a seamless envelope; crisp white sharpens it. White or pale-grey trim both finish cleanly.

Warm bulbs coax the sand side, neutral bulbs the grey side — sample under your own fixtures. Pale mid-tones conceal daily dust well. A dependable whole-space choice where decor will evolve over the years.

Request a sample and evaluate it in your space before committing. Colour, texture, and sheen read differently under different light sources and room proportions. We provide samples from our Bolton showroom and can bring samples to your free in-home estimate for accurate colour assessment in your actual lighting conditions.

Professional Installation

How we install your floor

01

Subfloor Assessment & Preparation

We assess and prepare your subfloor before a single plank is laid — levelling high spots, filling low points, testing moisture levels, and looking for subfloor movement. Any required subfloor preparation will be assessed and confirmed in your estimate. Proper prep is the foundation that allows the 30-year warranty to mean something.

02

Direct-Glue Installation

Each plank is bonded to the prepared subfloor with a suitable pressure-sensitive adhesive, applied exactly as the official installation guide directs — perimeter strips for small rooms, a 13-ft adhesive grid for larger areas, and a full spread in heavy-traffic zones. Material acclimates flat in the room for 48 hours first, and every piece is set tight to the last for a seamless, silent, fully bonded surface.

03

Finishing, Transitions & Trim

We install all transition strips, quarter-round, and edge profiles to complete the installation cleanly. No exposed edges, no visible expansion gaps, no unfinished details. The transition and trim finishing is what distinguishes a professional installation from an amateur one — and it is what you evaluate every day once the floor is in.

Long-Term Performance

Care & Maintenance

○

Daily Care

Sweep or vacuum regularly using a soft-bristle broom or a vacuum on hard-floor mode without a beater bar. Entry mats at all exterior doors significantly reduce debris and grit that is brought onto the floor from outside — this is the most effective way to extend the life of the wear layer.

∣

Cleaning & Spills

Damp mop with a well-wrung mop and a pH-neutral vinyl floor cleaner for routine cleaning. The 100% waterproof vinyl handles damp mopping safely. Wipe spills promptly to prevent residue build-up on the floor surface. Avoid steam mops and harsh chemical cleaners, which can degrade the wear layer surface over time.

△

Protecting the Surface

Place felt pads under all furniture legs to prevent compression marks from heavy furniture and point load. Avoid rubber-backed mats for extended periods, as some rubber compounds can react with vinyl surfaces over time. Felt pads address the load cases that can otherwise cause permanent impressions in the wear layer.

☐

Climate & Stability

The vinyl core is dimensionally stable relative to temperature and humidity variation — it does not expand and contract with seasonal humidity changes the way laminate and wood-based floors do. Maintain standard expansion gaps at all walls and fixed obstacles. The vinyl core is particularly well-suited to below-grade installations where subfloor moisture and seasonal humidity variation would compromise wood-based products.

Common Questions

Frequently Asked Questions

Greige, warm grey, soft white, and putty create a seamless scheme; crisp white modernises it. Few floors give this much wall-colour latitude in both directions.

Both palettes work: cream, tan, and natural woods for warmth; grey, white, and black for composure. The safest choice for evolving decor.

Warm bulbs (2700K) draw out the sandy warmth; neutral bulbs (3000K–3500K) draw out the grey. Check a sample in your own evening light. For pot lights, fit neutral-white bulbs (3000K–3500K) across the whole room — keeping every fixture at the same colour temperature matters more than the brand.

Transitional, contemporary, coastal, and Scandinavian interiors all suit Sphere — the range’s recommendation for buyers torn between warm and grey.

White, greige, and muted green cabinetry all sit comfortably; warm and cool cabinet schemes are equally at home. White or pale-grey trim, brass or black hardware by direction.

Yes — Sphere is a direct-glue product, a verified manufacturer specification. Every plank is bonded to the subfloor with a suitable adhesive, which is what gives glue-down vinyl its solid, seamless, completely quiet feel and its suitability for heavy and rolling traffic.

Where the manufacturer does not name a specific adhesive — as here — we commonly recommend MAPEI Ultrabond ECO 373, a universal pressure-sensitive adhesive widely used for LVT/LVP glue-down installations. The final adhesive choice always depends on your subfloor, site conditions, and the manufacturer’s requirements — our installer confirms suitability before installation begins.

Approximate coverage for Ultrabond ECO 373 is 125–185 sq ft per gallon on porous substrates using a 1/16″ × 1/16″ × 1/16″ square-notch trowel, and 185–245 sq ft per gallon on nonporous substrates using a 1/16″ × 1/32″ × 1/32″ U-notch trowel. Actual coverage varies with subfloor condition, trowel size, and installation method — we confirm quantities at your estimate rather than promising a number.

Yes — more than any other flooring type. The official installation guidance requires the subfloor to be smooth, level, clean, dust-free, and dry, with moisture tested before installation and old adhesive residues fully removed. Levelling compound corrects low spots. Proper preparation is the single biggest factor in a successful glue-down floor. Any required subfloor preparation will be assessed and confirmed in your estimate.

Per the official installation guide: rooms under about 170 sq ft can be edged with a 4″ adhesive strip at thresholds and perimeters; larger rooms use 4″ adhesive strips in a grid at 13 ft intervals; and heavy-traffic areas—call for a full spread of adhesive. Material must acclimate flat in the room for at least 48 hours at 18–27°C first. Our installers follow this guidance exactly.

Yes — the waterproof SPC construction suits below-grade spaces well, provided the concrete is tested for moisture first. Where readings exceed the official limits, a suitable moisture-suppression system is applied before the adhesive. Both steps are part of our standard basement process.

Yes — correctly prepared concrete is an ideal base for glue-down vinyl. The slab must be clean, smooth, level, and dry, with cracks repaired and moisture tested to the official limits before adhesive is applied.

We strongly recommend it for glue-down products. Adhesive selection, trowel size, open time, subfloor moisture, and flatness all have to be right the first time — adhesive mistakes are far harder to correct than click-lock ones. Our Supply & Install service covers adhesive, installation, and our 2-year limited workmanship warranty on the installation work; any required subfloor preparation will be assessed and confirmed in your estimate. Installation is quoted in writing at your free in-home estimate.

Yes, within the official limits: the surface temperature at the flooring interface must not exceed 27°C (85°F), the system must be off for 48 hours before, during, and after installation, and then raised gradually. Electric systems must be embedded in smoothing compound per the official guide.

The fully bonded, waterproof surface handles spills, accidents, and daily traffic cleanly — and the verified 20 mil wear layer is a commercial-grade specification comfortably above household demands. Felt pads under furniture and entry mats keep it looking new longest.

Sweep or vacuum regularly (hard-floor mode) and damp mop with a pH-neutral vinyl cleaner. Avoid solvents, harsh chemicals, and standing water. Entrance mats — non-rubber-backed — protect against grit, per the official care guidance.

Yes — strongly. Colour, texture, and sheen read differently under different lighting. Request a sample through our Bolton showroom, or we can bring samples to your free in-home estimate.

Kitchens, bathrooms, basements, entries, and busy living areas — plus commercial spaces, where glue-down vinyl’s full bond handles rolling loads and concentrated traffic better than floating floors. It is designed for interior use over correctly prepared subfloors.

Order 10% extra for a straight-lay installation and 15% for diagonal layouts or complex rooms. With 18.67 sq ft per box, we calculate exact box quantities as part of every free in-home estimate.

The manufacturer does not produce matching accessories for this glue-down line — transitions for glue-down floors are custom-selected per project to suit the heights and finishes on site. We confirm the right profiles at your free estimate.

A verified 30-year limited residential and 8-year limited commercial manufacturer warranty applies, plus our 2-year limited installation workmanship warranty on every Supply & Install project. The complete terms of our installation warranty are on our Flooring Installation Warranty page.

Calculate your project estimate with our installation calculator. Glue-down installation pricing depends on your subfloor condition, room layout, and adhesive method, so installation is quoted in writing at your free in-home estimate. Every Supply & Install package includes material, adhesive, professional installation and a 2-year limited workmanship warranty. Any required subfloor preparation will be assessed and confirmed in your estimate.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.

02

Proper Installation

Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.

03

Transparent Pricing

Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.

30-Year Residential  ·  8-Year Commercial  ·  2-Year Limited Installation Workmanship Warranty

This range carries a verified 30-year limited residential and 8-year limited commercial manufacturer warranty. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms.

Free In-Home Estimate

See it in your home before you decide

We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.