Skip to content
Slate 7mm SPC vinyl plank flooring room scene
Bolton, Ontario
7mm SPC Vinyl 1.5mm IXPE Pad Attached FloorScore · 30-Yr Warranty

Slate

Cool mid grey oak with a soft, even cast

$4.49 / sq ft

Material only

$2.49/ sq ft

Book a Free Estimate
Slate Code PS104
Material$4.49$2.49 / sq ft
Supply & InstallCalculate your project estimate
Get a Quote
␣Image loading…
Slate 7mm SPC vinyl plank flooring room scene
Slate — Room Scene
Slate — Plank View

Quick Summary

Slate is a cool mid grey oak with a soft, even cast — light and composed across its 7-inch planks. It gives contemporary and transitional rooms a clean, quiet stage, suits basements and open plans alike, and pairs confidently with whites, blacks, and warm woods.

Ideal for

Living rooms · Condominiums · Home offices · Basements · Contemporary and modern interiors

At a Glance

7″ × 48″Plank Size
7 mmTotal Thickness
SPC + 1.5mm IXPEConstruction
20 Mil (0.5mm)Wear Layer
19.12 sq ft / boxCoverage
Clicking Drop LockFloating Installation

Certified Performance

VOCFREEFloorScore Certified
30YEAR30-Yr Residential
20MIL20 Mil Wear Layer
7mm SPC Vinyl · 7″×48″ · 1.5mm IXPE Pad · 20 Mil Wear · V-Groove Bevel · Clicking Drop Lock

Slate

Cool mid grey oak with a soft, even cast · Code PS104

Your Pricing Options

Material Only

Regular: $4.49 / sq ft

$2.49 / sq ft

Box coverage: 19.12 sq ft  ·  ~$47.61 / box

For best results, ask us about our professional installation — backed by our 2-year limited workmanship warranty.

Need Professional Installation?

Have our experienced installers complete your project — precise installation, transitions, and trim — backed by a 2-year limited workmanship warranty.

Supply & Install

Calculate your project estimate

  • ✓Material supply
  • ✓Professional installation
  • ✓2-Year limited installation workmanship warranty

Any required subfloor preparation will be assessed and confirmed in your estimate.

Book a Free In-Home Estimate →

No obligation · Final price confirmed at estimate

Estimates are based on standard conditions. Complex layouts, subfloor issues, or stair work may affect final cost — always confirmed in writing before any work begins.

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the boxes and material cost at today’s price of $2.49 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 19.12 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Or call us: 905-872-7557

Free In-Home Estimate
FloorScore Certified
Bolton Showroom

Technical Specifications

Confirmed specifications only — verified from the official manufacturer specification pages.

Colour CodePS104
Plank Size7″ × 48″ (178 × 1220 mm)
Total Thickness7 mm
StructureLuxury Vinyl Plank — 4.5 mm SPC + 1.5 mm IXPE pad
Core MaterialRigid SPC (Stone Plastic Composite)
Attached Pad1.5 mm IXPE under-pad (pre-attached)
Wear Layer0.5 mm / 20 mil
Surface FinishWood-Grain
Edge ProfileV-Groove Bevel
Installation MethodClicking Drop-Lock — floating
CertificationFloorScore
Use RatingResidential · Commercial
Coverage / Box19.12 sq ft
Warranty30-Year Residential · 12-Year Commercial
Material Price$2.49 / sq ft  ·  ~$47.61 / box (19.12 sq ft)
Supply & InstallCalculate your project estimate
1

Rigid 7mm SPC Build

A rigid SPC (stone plastic composite) core with a factory-attached 1.5 mm IXPE pad — 7 mm in total. Dense and dimensionally stable, it stands up to busy main floors and everyday family use.

2

1.5 mm IXPE Pad Attached

A 1.5 mm IXPE under-pad is factory-bonded to every plank — cushioning each step and softening sound underfoot, with no separate underlayment to buy.

3

Clicking Drop-Lock — No Glue

Planks lock together and float over concrete, plywood, or existing hard flooring with no nails, staples, or glue — a clean, fast, low-mess installation.

4

20 Mil Wear Layer, V-Groove Bevel

A 0.5 mm (20 mil) wear layer over a wood-grain surface with a V-groove bevel — the defined proportions and realistic look of premium hardwood, built for durable everyday use.

5

Certified Clean, Long Warranty

At $2.49 per sq ft, Slate pairs FloorScore certification with a 30-year residential warranty — and Supply & Install is available, complete, with our 2-year limited installation workmanship warranty.

6

Official Documents

The manufacturer’s official technical documentation for this floor — complete specifications, testing data, and installation requirements — is available for your review:
Technical Specification Sheet (PDF) ↗
Installation & Warranty Instructions (PDF) ↗

Slate 7mm SPC vinyl plank view
SPC

Core Construction

7mm SPC.
Stable, quiet, warm underfoot.

Slate is built on a rigid stone-composite SPC core with an attached 1.5 mm IXPE pad — dimensionally stable, FloorScore certified, and backed by a 30-year residential warranty.

Outstanding Value

$2.49/sq ft.
Rigid SPC and certified.

At $2.49 per sq ft, Slate delivers a rigid 7mm SPC build, an attached 1.5 mm IXPE pad, a 20 mil wear layer, and a 30-year residential warranty. Supply & Install is available — complete, professional, backed by a 2-year limited workmanship warranty.

Slate SPC vinyl flooring in a furnished room
Slate

Visual Character

Mid grey.
Cool and composed.

Slate spreads a cool mid grey across the planks — a soft, even grey oak that keeps rooms bright and modern while framing furniture cleanly over the wide 7-inch boards.

Buying advice & styling guidance for Slate

Slate works with white, grey, and black for a modern look, or walnut and leather to warm it. Soft-white and greige walls keep it airy; navy or charcoal features add depth.

Neutral bulbs hold the grey calm and true; warm bulbs soften it slightly. Mid grey is among the more forgiving cool tones for dust.

Request a sample and evaluate it in your space before committing. Colour, texture, and sheen read differently under different light sources and room proportions. We provide samples from our Bolton showroom and can bring samples to your free in-home estimate for accurate colour assessment in your actual lighting conditions.

Professional Installation

How we install your floor

01

Subfloor Assessment & Preparation

We assess and prepare your subfloor before a single plank is laid — levelling high spots, filling low points, testing moisture levels, and looking for subfloor movement. Any required subfloor preparation will be assessed and confirmed in your estimate. Proper prep is the foundation that allows a manufacturer warranty to mean something.

02

Click-Lock Installation

Our click-lock system seats each plank with precision. Every plank is installed with correct stagger patterns and expansion gaps at all walls and fixed obstacles. These details separate a properly engineered installation from one that develops problems in the first few years.

03

Finishing, Transitions & Trim

We install all transition strips, quarter-round, and edge profiles to complete the installation cleanly. No exposed edges, no visible expansion gaps, no unfinished details. The transition and trim finishing is what distinguishes a professional installation from an amateur one — and it is what you evaluate every day once the floor is in.

Long-Term Performance

Care & Maintenance

○

Daily Care

Sweep or vacuum regularly using a soft-bristle broom or a vacuum on hard-floor mode without a beater bar. Entry mats at all exterior doors significantly reduce debris and grit that is brought onto the floor from outside — this is the most effective way to extend the life of the wear layer.

∣

Cleaning & Spills

Damp mop with a well-wrung mop and a pH-neutral vinyl floor cleaner for routine cleaning. The dense, rigid SPC core stands up to routine damp mopping. Wipe spills promptly to prevent residue build-up on the floor surface. Avoid steam mops and harsh chemical cleaners, which can degrade the wear layer surface over time.

△

Protecting the Surface

Place felt pads under all furniture legs to prevent compression marks from heavy furniture and point load. Avoid rubber-backed mats for extended periods, as some rubber compounds can react with vinyl surfaces over time. Felt pads address the load cases that can otherwise cause permanent impressions in the wear layer.

☐

Climate & Stability

The vinyl core is dimensionally stable relative to temperature and humidity variation — it does not expand and contract with seasonal humidity changes the way laminate and wood-based floors do. Maintain standard expansion gaps at all walls and fixed obstacles. The vinyl core is particularly well-suited to below-grade installations where subfloor moisture and seasonal humidity variation would compromise wood-based products.

Common Questions

Frequently Asked Questions

Soft white, dove grey, and greige keep the scheme cohesive; crisp white sharpens the contrast; navy or forest-green features add depth against the cool base.

White, grey, and black upholstery keep it modern; walnut and mid woods, leather, and brass warm it up — a versatile, contemporary stage.

Neutral bulbs (3000K–3500K) hold the grey true and cool; warmer bulbs soften it slightly. Sample under your own fixtures. For pot lights, fit neutral-white bulbs (3000K–3500K) across the whole room — keeping every fixture at the same colour temperature matters more than the brand.

Contemporary, modern, and industrial interiors suit it best — rooms built on clean, cool neutrality.

The rigid SPC core is dense and dimensionally stable, which makes it a common, practical choice for basements. Over concrete, we assess subfloor moisture and fit the appropriate underlayment as part of our standard basement process, and confirm suitability before installation.

Yes. The rigid 7mm SPC construction with a 20 mil (0.5 mm) wear layer stands up well to pets, kids, and busy entrances, and cleans easily. Felt pads under furniture keep it flawless longest.

Sweep or vacuum regularly (hard-floor mode, no beater bar) and damp mop with a pH-neutral vinyl cleaner as needed. Avoid steam mops, wax, and abrasive pads, which degrade any vinyl surface over time. Rolling office chairs are not recommended, as they can cause premature wear.

Yes — strongly. Colour, texture, and sheen read differently under different lighting. Request a sample through our Bolton showroom, or we can bring samples to your free in-home estimate for assessment in your own light.

Rigid SPC drop-lock click is DIY-friendlier than glue-down products, but professional installation protects the result: correct acclimation, subfloor flatness, expansion allowance, and clean transitions — and the installation work is backed by our 2-year limited installation workmanship warranty.

Order 10% extra for a straight-lay installation and 15% for diagonal layouts or complex rooms. With 19.12 sq ft per box, we calculate exact box quantities as part of every free in-home estimate.

No. Slate uses a clicking drop-lock system — planks lock together and float over the subfloor with no adhesive, no nails, and no glue smell.

No. A 1.5 mm IXPE under-pad is factory-attached to every plank, cushioning each step and softening sound underfoot. No separate underlayment purchase is required.

Slate is a 7mm SPC luxury vinyl plank with a rigid stone-composite core, a factory-attached 1.5 mm IXPE pad, a 20 mil (0.5 mm) wear layer, a V-groove bevel, and a wood-grain surface. It is FloorScore certified.

Yes. Slate is FloorScore certified, meeting strict indoor air-quality standards — a sound choice for bedrooms, living areas, and whole-home installations.

Yes — even a floating floor needs a clean, dry, flat base. Subfloors should be flat within 3/16″ over 10 ft; high spots are ground and low spots filled with levelling compound. Any required subfloor preparation will be assessed and confirmed in your estimate.

Slate carries a 30-year residential and 12-year commercial manufacturer warranty. Every Supply & Install project additionally includes our own 2-year limited installation workmanship warranty.

Calculate your project estimate with our installation calculator — it prices this floor’s material and installation for your rooms. Supply & Install includes material supply, professional installation and a 2-year limited installation workmanship warranty. Any required subfloor preparation will be assessed and confirmed in your estimate. Final price is confirmed in writing at your free in-home estimate.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.

02

Proper Installation

Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.

03

Transparent Pricing

Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.

FloorScore Certified  ·  30-Year Residential Warranty

This floor is FloorScore certified and backed by a 30-year residential / 12-year commercial manufacturer warranty. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; the manufacturer’s warranty terms are confirmed with you before purchase.

Free In-Home Estimate

See it in your home before you decide

We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.