Skip to content
Loose Lay 504 loose lay vinyl flooring room scene
Bolton, Ontario
5mm Loose Lay Pure Vinyl7.44″ × 48.4″ PlanksNo-Glue Loose Lay Install

Loose Lay 504

Warm medium brown oak with rich, even grain

$5.25 / sq ft

Material only

$3.25/ sq ft

Book a Free Estimate
Loose Lay 504 SKU 504
Material$5.25$3.25 / sq ft
InstallationAvailable — contact us
Get a Quote
␣Image loading…
Loose Lay 504 loose lay vinyl flooring room scene
Loose Lay 504 — Room Scene
Loose Lay 504 — Plank View

Quick Summary

Loose Lay 504 is a warm medium brown oak — the classic wood tone of this range, rich without going dark. It grounds living rooms and dens with familiar warmth, hides everyday traffic well, and its loose lay build means the whole floor goes down glue-free in a day — and a scratched plank comes out just as easily years later.

Ideal for

Living rooms · Dens · Family rooms · Rental units · Traditional and transitional interiors

At a Glance

7.44″ × 48.4″Plank Size
5 mmTotal Thickness
Pure VinylConstruction
Loose LayInstallation
25 sq ft / boxCoverage
All GradesOn · Above · Below

Matching Accessories

Coordinating Trim & Stair Set

A coordinating accessory set is shown on the official collection page — including a matching stair tread and riser. Colour matches are confirmed at your free estimate.

Reducer moulding
Reducer94.49″ × 1.77″ × 0.31″

Creates a smooth, safe transition where this floor meets a lower surface — tile, hardwood, or carpet.

T-Moulding
T-Moulding94.49″ × 1.77″ × 0.31″

Bridges the gap where two flooring sections meet across a doorway, in a coordinating colour.

Stair nosing
Stair Nosing94.49″ × 2.17″ × 0.71″

Finishes stair edges cleanly when this floor is used on staircases, protecting the plank edge from wear.

Stair tread
Stair Tread47.24″ × 11.81″ × 2.05″

A matching stair tread for a seamless floor-to-staircase finish on box and closed staircases.

Stair riser
Stair Riser47.24″ × 7.87″ × 0.16″

The matching vertical panel for stair risers, completing a coordinated staircase renovation.

5mm Loose Lay Pure Vinyl · 7.44″ × 48.4″ Planks · Loose Lay Installation

Loose Lay 504

Warm medium brown oak with rich, even grain · SKU 504

Your Pricing

Material Only

Regular: $5.25 / sq ft

$3.25 / sq ft

Box coverage: 25 sq ft  ·  ~$81.25 / box

Professional installation is available for this floor — ask us for a project quote.

Need Professional Installation?

Our installers handle the subfloor preparation confirmed in your estimate, loose lay installation with any recommended glue-assist, and transitions. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Contact us and we will quote your project properly at a free in-home estimate.

Book a Free In-Home Estimate →

No obligation · Installation quoted for your project

Installation pricing depends on room sizes, subfloor condition, and layout — always confirmed in writing before any work begins.

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the boxes and material cost at today’s price of $3.25 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 25 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Or call us: 905-872-7557

Free In-Home Estimate
Pure Vinyl · Loose Lay
Bolton Showroom

Technical Specifications

Confirmed specifications only — verified from the official product pages.

SKU / Colour Code504
Plank Size7.44″ × 48.4″
Total Thickness5 mm
ConstructionPure Vinyl (loose lay format)
Wear LayerNot Specified by manufacturer
Finish / BevelNot Specified by manufacturer
Installation MethodLoose Lay — no field adhesive by design; glue-assist only if your installer recommends it
Suitable LocationOn, above, or below grade
Attached UnderlaymentNone
Coverage / Box25 sq ft
WarrantyManufacturer warranty — term confirmed in writing at estimate
Material Price$3.25 / sq ft  ·  ~$81.25 / box (25 sq ft)
Professional InstallationAvailable — contact us for a project quote
1

True Loose Lay Simplicity

No clicking, no nails, no field adhesive — the heavy pure-vinyl planks lay flat and hold by weight and friction, making this the fastest floor in our collection to install and the easiest to repair.

2

Repairs in Minutes, Not Days

Because nothing is glued or clicked, a damaged plank lifts out and a new one drops in — no trades, no adhesive cure times. Keep a spare box and the floor stays perfect for years.

3

Approved for Every Level

Officially approved for installation on, above, or below grade — basements included — with resilient pure-vinyl construction that handles real household life quietly and comfortably underfoot.

4

Coordinating Accessory Set

A matching reducer, T-moulding, stair nosing, stair tread, and stair riser are shown on the official collection page — enabling clean transitions and complete staircase coordination.

5

Sharp Value

At $3.25 per sq ft, Loose Lay 504 makes loose lay vinyl genuinely accessible — with professional installation available, quoted for your project at a free in-home estimate.

6

Official Documents

The manufacturer’s official technical documentation for this floor — complete specifications, testing data, and installation requirements — is available for your review:
View Official Specification Sheet (PDF) ↗

Installation & adhesive guidance for Loose Lay 504

As a loose lay floor, Loose Lay 504 is installed without field adhesive by design — planks lay flat over the prepared subfloor and hold in place by weight and friction. The supplier does not specify glue-assist; however, in large open rooms, under heavy rolling loads, or in strong direct sun, an installer may recommend perimeter or spot glue-assist for extra security. That judgement is made for your specific site and confirmed with you before work begins.

Where the manufacturer does not name a specific adhesive — as here — we commonly recommend MAPEI Ultrabond ECO 373, a universal pressure-sensitive adhesive widely used for LVT/LVP glue-down installations. Glue choice always depends on your subfloor and site conditions, and our installer confirms adhesive suitability before installation begins. Coverage varies with subfloor condition and trowel size — we confirm quantities at your estimate rather than promising a number.

Whatever the adhesive, the subfloor must be clean, flat, dry, smooth, and properly prepared before installation — and glue coverage varies with subfloor condition and trowel size, so we confirm quantities at your estimate rather than promising a number.

Loose Lay 504 loose lay vinyl flooring plank view
Lay

Construction

Lays flat.
Stays put.

The heavy, flexible pure-vinyl build is the whole trick: planks lay loose, sit dead flat, and hold by friction — no adhesive odour, no cure time, and single-plank repairs for life.

Outstanding Value

$3.25/sq ft.
Loose lay ease.

At $3.25 per sq ft, Loose Lay 504 delivers loose lay pure-vinyl construction approved for every level of the home. Professional installation is available — contact our store and we will quote your project at a free in-home estimate, backed by our 2-year limited workmanship warranty.

Loose Lay 504 loose lay vinyl flooring in a furnished room
504

Visual Character

Classic brown.
Warmth without work.

Loose Lay 504 delivers the traditional mid-brown oak look homeowners know — laid loose, flat, and fast, with the deep even grain doing the decorating.

Buying advice & styling guidance for Loose Lay 504

504 pairs with the classics: cream and oatmeal upholstery, mid and dark woods, brass and bronze accents. Warm whites and soft cream walls keep the brown rich rather than heavy; sage and clay features deepen it. Warm-white trim frames it naturally.

Warm bulbs (2700K–3000K) make the brown glow in the evening. The mid-depth tone conceals dust and small scuffs well. Traditional, transitional, and rustic schemes all suit it — the dependable warm choice of this range.

Request a sample and evaluate it in your space before committing. Colour, texture, and sheen read differently under different light sources and room proportions. We provide samples from our Bolton showroom and can bring samples to your free in-home estimate for accurate colour assessment in your actual lighting conditions.

Professional Installation

How we install your floor

01

Subfloor Assessment & Preparation

We assess and prepare your subfloor before a single plank is laid — levelling high spots, filling low points, testing moisture levels, and looking for subfloor movement. Any required subfloor preparation will be assessed and confirmed in your estimate. Proper prep is the foundation that allows a long-term result you can trust.

02

Loose Lay Installation

Each plank is laid flat, tight to the last, over the prepared subfloor — no clicking, no nails, and no field adhesive. The heavy, flexible pure-vinyl construction holds the floor in place by weight and friction. Where site conditions warrant it — large open rooms, rolling loads, or strong sun — our installer may recommend perimeter or spot glue-assist for extra security, confirmed with you before work begins.

03

Finishing, Transitions & Trim

We install all transition strips, quarter-round, and edge profiles to complete the installation cleanly. No exposed edges, no visible expansion gaps, no unfinished details. The transition and trim finishing is what distinguishes a professional installation from an amateur one — and it is what you evaluate every day once the floor is in.

Long-Term Performance

Care & Maintenance

○

Daily Care

Sweep or vacuum regularly using a soft-bristle broom or a vacuum on hard-floor mode without a beater bar. Entry mats at all exterior doors significantly reduce debris and grit that is brought onto the floor from outside — this is the most effective way to extend the life of the wear layer.

∣

Cleaning & Spills

Damp mop with a well-wrung mop and a pH-neutral vinyl floor cleaner for routine cleaning. The 100% waterproof vinyl handles damp mopping safely. Wipe spills promptly to prevent residue build-up on the floor surface. Avoid steam mops and harsh chemical cleaners, which can degrade the wear layer surface over time.

△

Protecting the Surface

Place felt pads under all furniture legs to prevent compression marks from heavy furniture and point load. Avoid rubber-backed mats for extended periods, as some rubber compounds can react with vinyl surfaces over time. Felt pads address the load cases that can otherwise cause permanent impressions in the wear layer.

☐

Climate & Stability

The vinyl core is dimensionally stable relative to temperature and humidity variation — it does not expand and contract with seasonal humidity changes the way laminate and wood-based floors do. Maintain standard expansion gaps at all walls and fixed obstacles. The vinyl core is particularly well-suited to below-grade installations where subfloor moisture and seasonal humidity variation would compromise wood-based products.

Common Questions

Frequently Asked Questions

Warm whites, cream, and soft greige harmonise; sage and clay features deepen the warmth. Cool blue-greys are the least flattering partners.

Cream and oatmeal upholstery, mid and dark woods, leather, and brass accents all feel native. One of the most furniture-friendly tones here.

Warm bulbs (2700K–3000K) enrich the brown; plan reasonable ambient light so the mid-depth tone stays rich rather than heavy. With pot lights, use warm-white bulbs (2700K–3000K) in every fixture — mixing colour temperatures in one room will make the floor read patchy.

Traditional, transitional, and rustic interiors suit 504 best — comfortable rooms built on familiar warmth.

Cream, sage, and warm-wood cabinetry pair richly; brass or oil-rubbed bronze hardware echoes the warmth. Warm-white trim completes it.

By design, no — this is a loose lay floor. The heavy, flexible pure-vinyl planks lay flat and hold in place by weight and friction, with no clicking and no field adhesive. Depending on site conditions — large rooms, heavy rolling loads, or direct sun — your installer may recommend perimeter or spot glue-assist for extra security; that is an installer judgement, not a manufacturer requirement.

Where the manufacturer does not name a specific adhesive — as here — we commonly recommend MAPEI Ultrabond ECO 373, a universal pressure-sensitive adhesive widely used for LVT/LVP glue-down installations. Glue choice always depends on your subfloor and site conditions, and our installer confirms adhesive suitability before installation begins. Coverage varies with subfloor condition and trowel size — we confirm quantities at your estimate rather than promising a number.

Yes — loose lay floors rely on full, flat contact with the subfloor. The surface must be clean, flat, dry, smooth, and properly prepared; bumps or debris under a loose-laid plank will telegraph through and can let planks shift. Any required subfloor preparation will be assessed and confirmed in your estimate.

Yes — clean, dry, flat concrete is an excellent base for loose lay vinyl, and the product is approved for on, above, or below grade. A moisture check is still recommended below grade.

Loose lay is the most DIY-friendly vinyl format, but professional installation still pays: perfect subfloor prep, tight seams, correct trimming at walls, and the judgement call on whether your specific rooms warrant glue-assist. Contact us for installation pricing — quoted for your project at your free in-home estimate.

Order 10% extra for a straight-lay installation and 15% for diagonal layouts or complex rooms. With 25 sq ft per box, we calculate exact box quantities at your free estimate — and with loose lay, keeping a spare box for future plank swaps is especially worthwhile.

Yes — the product is approved for installation on, above, or below grade, and pure vinyl construction handles below-grade environments well. A moisture assessment of the concrete is part of our standard basement process.

The resilient pure-vinyl surface handles spills, accidents, and daily family traffic cleanly and quietly — and individual planks can be lifted and replaced if one ever suffers serious damage. Felt pads under furniture and entry mats keep it looking new longest. The wear layer rating is not published for this range — ask us to compare rated options if you have very heavy pet traffic.

Sweep or vacuum regularly (hard-floor mode) and damp mop with a pH-neutral vinyl cleaner. Avoid solvents, harsh chemicals, steam mops, and standing water. Non-rubber-backed entrance mats protect against grit.

Yes — strongly. Colour, texture, and sheen read differently under different lighting. Request a sample through our Bolton showroom, or we can bring samples to your free in-home estimate.

Basements, rental units, home offices, bedrooms, and living areas — anywhere a fast, flat, quiet floor with easy plank replacement earns its keep. Approved for on, above, or below grade.

Yes — a coordinating accessory set is shown on the official collection page: Reducer and T-Moulding (94.49″×1.77″×0.31″), Stair Nosing (94.49″×2.17″×0.71″), Stair Tread (1200×300×2.05″), and Stair Riser (1200×200×0.16″). Colour matches are confirmed at your free estimate.

Yes — our Supply & Install service covers materials and loose lay installation with any recommended glue-assist, transitions, and our 2-year limited workmanship warranty on the installation work; any required subfloor preparation will be assessed and confirmed in your estimate. Contact us and we will quote your project at a free in-home estimate.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.

02

Proper Installation

Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.

03

Transparent Pricing

Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.

Manufacturer Warranty  ·  2-Year Limited Installation Workmanship Warranty

This range is backed by a manufacturer warranty — the specific term is confirmed in writing before any work begins. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms.

Free In-Home Estimate

See it in your home before you decide

We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.