Skip to content
Bolton, Ontario
5mm Glue Down Pure Vinyl 7.36″ × 48.31″ Planks IIC 73 / STC 72 Quiet

Mercury

Taupe grey-brown oak with balanced, even grain

$4.99 / sq ft

Material only

$2.99/ sq ft

Book a Free Estimate
Mercury SKU AC5-03
Material$4.99$2.99 / sq ft
InstallationAvailable — contact us
Get a Quote
␣Image loading…
Mercury glue down vinyl flooring room scene
Mercury — Room Scene

Quick Summary

Mercury is a taupe grey-brown oak — the balanced neutral of this 5mm commercial range, comfortable in both warm and cool schemes. Its thicker body carries high noise-reduction ratings (IIC 73 / STC 72), and the full glue-down bond keeps it flat, quiet, and hard-working.

Ideal for

Offices · Condominiums · Rental units · Living areas · Transitional and contemporary interiors

At a Glance

7.36″ × 48.31″Plank Size
5 mmTotal Thickness
Pure VinylConstruction
Glue DownInstallation
19.75 sq ft / boxCoverage
IIC 73 / STC 72Noise Reduction

Certified Performance

WATERPROOF100% Waterproof
VOCFREEFloorScore Certified
AC5WEAR RATEDAC5 Commercial Rated

100% waterproof describes the vinyl itself: getting wet does not damage it. Water left standing, a leak or a flood can still reach the subfloor through the joints and edges, so wipe up standing water promptly — the manufacturer’s warranty sets which water damage is covered.

Matching Accessories

Transitions & Trim

Every glue-down installation is finished with the right transitions and trim.

The manufacturer does not publish a dedicated accessory set for this range. Colour-matched transitions, reducers, and stair nosings are available — we confirm the correct profiles and closest colour match for your floor at your free estimate.

5mm Glue Down Pure Vinyl · 7.36″ × 48.31″ Planks · IIC 73 / STC 72 Noise Rated

Mercury

Taupe grey-brown oak with balanced, even grain · SKU AC5-03

Your Pricing

Material Only

Regular: $4.99 / sq ft

$2.99 / sq ft

Box coverage: 19.75 sq ft  ·  ~$59.05 / box

Professional installation is available for this floor. Calculate your project estimate.

Need Professional Installation?

Our installers handle the subfloor preparation confirmed in your estimate, adhesive and full glue-down installation, and transitions. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Contact us and we will quote your project properly at a free in-home estimate.

Book a Free In-Home Estimate →

No obligation · Installation is quoted in writing at your free in-home estimate.

Installation pricing depends on room sizes, subfloor condition, and layout — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Pure Vinyl · Glue Down
Bolton Showroom

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the boxes and material cost at today’s price of $2.99 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 19.75 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Technical Specifications

Confirmed specifications only — verified from the official product pages.

SKU / Colour CodeAC5-03
Plank Size7.36″ × 48.31″
Total Thickness5 mm
ConstructionPure Vinyl (glue-down format)
Wear Layer20 Mil (0.5 mm) — AC5 Commercial Rated
Finish / BevelBP Texture with UV Coating · Micro Bevel
Noise ReductionIIC 73 / STC 72
CertificationFloorScore Certified
Radiant HeatNot recommended — radiant installation voids the manufacturer warranty
Installation MethodGlue Down (direct glue) — fully bonded to the subfloor
Suitable LocationOn, above, or below grade
Attached UnderlaymentNone
Coverage / Box19.75 sq ft
Warranty15-Year Residential (Ltd) · 5-Year Light Commercial (Ltd)
Material Price$2.99 / sq ft  ·  ~$59.05 / box (19.75 sq ft)
Professional InstallationAvailable — contact us for a project quote
1

Fully Bonded, Completely Silent

Direct-glue installation bonds every plank to the subfloor — no hollow sound, no deflection, no movement. The construction of choice for concentrated, hard-working traffic.

2

Big-Box Value Coverage

At 38.8 sq ft per box — the largest box coverage in our vinyl collection — and this range’s sharpest price point, whole-floor and multi-unit projects stay firmly on budget.

3

Approved for Every Level

Officially approved for installation on, above, or below grade — basements included — with resilient pure-vinyl construction that handles real household life quietly and comfortably underfoot.

4

Commercial-Grade Construction

Approved for all grade levels in both residential and commercial settings — the same floor serves a basement bedroom and a busy retail suite with equal composure.

5

Official Documents

The manufacturer’s official technical documentation for this floor — complete specifications, installation requirements, care guidance and the written warranty — is available for your review:
Specification Sheet (PDF) ↗
Installation Sheet (PDF) ↗
Care & Maintenance (PDF) ↗
Do's & Don'ts (PDF) ↗
Warranty (PDF) ↗

6

Sharp Value

At $2.99 per sq ft, Mercury makes glue down vinyl genuinely accessible — with professional installation available, quoted for your project at a free in-home estimate.

Installation & adhesive guidance for Mercury

Mercury is a glue-down floor — every plank is bonded to the subfloor with a suitable pressure-sensitive adhesive. The bond is what delivers the solid, silent, seamless result glue-down vinyl is chosen for, so adhesive selection and application must be right the first time.

Where the manufacturer does not name a specific adhesive — as here — we commonly recommend MAPEI Ultrabond ECO 373, a universal pressure-sensitive adhesive widely used for LVT/LVP glue-down installations. Glue choice always depends on your subfloor and site conditions, and our installer confirms adhesive suitability before installation begins. Coverage varies with subfloor condition and trowel size — we confirm quantities at your estimate rather than promising a number.

Whatever the adhesive, the subfloor must be clean, flat, dry, smooth, and properly prepared before installation — and glue coverage varies with subfloor condition and trowel size, so we confirm quantities at your estimate rather than promising a number.

Mercury glue down vinyl flooring room scene
Glue

Construction

Bonded to the building.
Built to stay.

Mercury is glued directly to the prepared subfloor — a pure-vinyl construction that becomes part of the structure itself: silent, seamless, and unmoved by heavy daily use.

Outstanding Value

$2.99/sq ft.
Glue-down strength.

At $2.99 per sq ft, Mercury delivers glue down pure-vinyl construction approved for every level of the home. Professional installation is available — contact our store and we will quote your project at a free in-home estimate, backed by our 2-year limited workmanship warranty.

Mercury glue down vinyl flooring in a furnished room
Mercury

Visual Character

Balanced greige.
Warm and cool at once.

Grey over warm sand in one calm surface — current enough for modern schemes, gentle enough for family rooms, and fully bonded for silence underfoot.

Buying advice & styling guidance for Mercury

Both directions work: cream, tan, and light woods pull it warm; white, grey, and black pull it modern. Greige and soft-white walls create a seamless envelope; deep features add depth. White or pale-grey trim both finish cleanly.

Warm bulbs coax the brown side, neutral bulbs the grey side — sample under your fixtures. Greige tones are exceptionally forgiving of dust and traffic, which is why they earn their keep in commercial spaces.

Request a sample and evaluate it in your space before committing. Colour, texture, and sheen read differently under different light sources and room proportions. We provide samples from our Bolton showroom and can bring samples to your free in-home estimate for accurate colour assessment in your actual lighting conditions.

Professional Installation

How we install your floor

01

Subfloor Assessment & Preparation

We assess and prepare your subfloor before a single plank is laid — levelling high spots, filling low points, testing moisture levels, and looking for subfloor movement. Any required subfloor preparation will be assessed and confirmed in your estimate. Proper prep is the foundation that allows a long-term result you can trust.

02

Direct-Glue Installation

Each plank is bonded to the prepared subfloor with a suitable pressure-sensitive adhesive at the correct trowel and open time, set tight to the last for a seamless, silent, fully bonded surface. Adhesive selection is confirmed for your specific subfloor before installation begins.

03

Finishing, Transitions & Trim

We install all transition strips, quarter-round, and edge profiles to complete the installation cleanly. No exposed edges, no visible expansion gaps, no unfinished details. The transition and trim finishing is what distinguishes a professional installation from an amateur one — and it is what you evaluate every day once the floor is in.

Long-Term Performance

Care & Maintenance

○

Daily Care

Sweep or vacuum regularly using a soft-bristle broom or a vacuum on hard-floor mode without a beater bar. Entry mats at all exterior doors significantly reduce debris and grit that is brought onto the floor from outside — this is the most effective way to extend the life of the wear layer.

∣

Cleaning & Spills

Damp mop with a well-wrung mop and a pH-neutral vinyl floor cleaner for routine cleaning. The 100% waterproof vinyl handles damp mopping safely. Wipe spills promptly to prevent residue build-up on the floor surface. Avoid steam mops and harsh chemical cleaners, which can degrade the wear layer surface over time.

△

Protecting the Surface

Place felt pads under all furniture legs to prevent compression marks from heavy furniture and point load. Avoid rubber-backed mats for extended periods, as some rubber compounds can react with vinyl surfaces over time. Felt pads address the load cases that can otherwise cause permanent impressions in the wear layer.

☐

Climate & Stability

The vinyl core is dimensionally stable relative to temperature and humidity variation — it does not expand and contract with seasonal humidity changes the way laminate and wood-based floors do. Maintain standard expansion gaps at all walls and fixed obstacles. The vinyl core is particularly well-suited to below-grade installations where subfloor moisture and seasonal humidity variation would compromise wood-based products.

Common Questions

Frequently Asked Questions

Greige, warm grey, soft white, and putty create a seamless scheme; crisp white sharpens it, charcoal features add depth.

Cream, tan, and light woods for warmth; white, grey, and black for composure. Handles evolving decor gracefully.

Warm bulbs (2700K) draw out the brown; neutral bulbs (3000K–3500K) draw out the grey. Check a sample in your own evening light. With pot lights, use neutral-white bulbs (3000K–3500K) in every fixture — mixing colour temperatures in one room will make the floor read patchy.

Transitional, contemporary, rustic-modern, and industrial interiors all suit this tone.

White, greige, muted green, and black cabinetry all sit comfortably; warm and cool schemes are equally at home.

Yes — Mercury is a glue-down product: every plank is bonded to the subfloor with a pressure-sensitive adhesive. That full bond is what gives glue-down vinyl its solid, seamless, completely quiet feel under heavy daily traffic. One manufacturer caveat: wheeled office chairs are not recommended on this range — use a protective chair mat under desk chairs.

Where the manufacturer does not name a specific adhesive — as here — we commonly recommend MAPEI Ultrabond ECO 373, a universal pressure-sensitive adhesive widely used for LVT/LVP glue-down installations. Glue choice always depends on your subfloor and site conditions, and our installer confirms adhesive suitability before installation begins. Coverage varies with subfloor condition and trowel size — we confirm quantities at your estimate rather than promising a number.

Yes — more than any other flooring type. The subfloor must be clean, flat, dry, smooth, and properly prepared, with old adhesive residues removed and low spots levelled, before any adhesive goes down. It is the single biggest factor in a successful glue-down floor. Any required subfloor preparation will be assessed and confirmed in your estimate.

Yes — correctly prepared concrete is an ideal base for glue-down vinyl, and the product is approved for on, above, or below grade. The slab must be clean, smooth, level, and dry, with moisture tested before adhesive is applied.

We strongly recommend it for glue-down products. Adhesive selection, trowel size, open time, and subfloor moisture all have to be right the first time — adhesive mistakes are far harder to correct than floating-floor ones. Contact us for installation pricing, quoted for your project at your free in-home estimate.

Order 10% extra for a straight-lay installation and 15% for diagonal layouts or complex rooms. With 19.75 sq ft per box — a generous box size — we calculate exact quantities at your free estimate.

Yes — the product is approved for installation on, above, or below grade, and pure vinyl construction handles below-grade environments well. A moisture assessment of the concrete is part of our standard basement process.

The resilient pure-vinyl surface handles spills, accidents, and daily family traffic cleanly and quietly. Felt pads under furniture and entry mats keep it looking new longest. Its 20 mil (0.5 mm) wear layer carries the manufacturer’s AC5 commercial rating — well suited to heavy pet and family traffic.

Sweep or vacuum regularly (hard-floor mode) and damp mop with a pH-neutral vinyl cleaner. Avoid solvents, harsh chemicals, steam mops, and standing water. Non-rubber-backed entrance mats protect against grit.

Yes — strongly. Colour, texture, and sheen read differently under different lighting. Request a sample through our Bolton showroom, or we can bring samples to your free in-home estimate.

Offices, rental units, basements, hallways, and busy living areas — anywhere a fully bonded, silent, hard-working surface earns its keep. Approved for on, above, or below grade.

No — the manufacturer advises against it, and installing this collection over any radiant heat system (hydronic, electric mesh, or wire) voids the product warranty. If you have heated floors, ask us about our radiant-approved vinyl collections instead.

The manufacturer does not publish a dedicated accessory set for this range, so we do not show pieces we cannot verify. Colour-matched reducers, T-mouldings, and stair nosings are available from our accessory range — we confirm the correct profiles and closest colour match at your free estimate.

Yes — our Supply & Install service covers adhesive and full glue-down installation, transitions, and our 2-year limited workmanship warranty on the installation work; any required subfloor preparation will be assessed and confirmed in your estimate. Contact us and we will quote your project at a free in-home estimate.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.

02

Proper Installation

Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.

03

Transparent Pricing

Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.

15-Year Residential Warranty  ·  5-Year Light Commercial  ·  2-Year Limited Installation Workmanship Warranty

This range carries a 15-year limited residential and 5-year light commercial manufacturer warranty, backed by a 20 mil (0.5 mm) wear layer with the manufacturer’s AC5 commercial rating. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms.

Free In-Home Estimate

See it in your home before you decide

We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.