Skip to content
Banff herringbone engineered hardwood flooring
Bolton, Ontario
5″ Wide Plank Wire Brushed Oak Select Grade

Banff

Golden European oak, warm and open · Oak engineered hardwood

$11.99 / sq ft

From

$6.29/ sq ft

Book a Free Estimate
Banff Select Grade
Material$11.99$6.29 / sq ft
InstallationCalculate your project estimate
Get a Quote
␣Image loading…
Banff herringbone engineered hardwood — Select Grade
Banff — Select Grade
Banff — Select Grade (2)
Banff — Select Grade (3)
Banff — Select Grade (4)
Banff — Select & Better Grade
Banff — Select & Better Grade (2)
Banff — Select & Better Grade (3)
Banff — Select & Better Grade (4)

Quick Summary About the Product

Banff is a golden european oak, warm and open in a herringbone pattern — a genuine wire brushed oak veneer on an engineered core, 5″ wide on a 3/4″ board cut for pattern installation. It is supplied in Select Grade and Select & Better Grade, which describes appearance only — how much natural knotting and colour movement the boards carry — never quality or durability. Full-size boards are in our Bolton showroom.

How this floor lives: Banff is a golden oak in European Oak with clearly warm undertones. In day-to-day light it reads as a true mid-tone — light enough to stay welcoming, deep enough to ground a bright room. How much knotting and variation the boards carry depends on the grade you choose — from clean and calm to full rustic character. Screens and room lighting shift wood tones, so always confirm with a physical sample from our Bolton showroom.

Similar floors: Electric Blue 7-1/2″ (lighter) · American Oak Honey Wheat 6″ (similar look)

At a Glance

5″Plank Width
3/4″Total Thickness
OakWood Species
Wire BrushedSurface Texture
Select GradeAppearance Grade
$6.29Per sq ft

Certified Performance

FloorScore, CARB II, FSC and CE certification marks

Certifications confirmed against the official documentation before you buy

Available Accessories

Transitions & Stair Parts

Supplied unfinished — stained on site to match your floor.

Unfinished solid wood stair nosing
Stair NosingUnfinished Solid Wood · Size Confirmed At Estimate

Finishes the front edge of a step or a landing where the floor meets a drop.

Unfinished solid wood t-moulding
T-MouldingUnfinished Solid Wood · Size Confirmed At Estimate

Joins this floor to another of the same height in a doorway or opening.

Unfinished solid wood reducer
ReducerUnfinished Solid Wood · Size Confirmed At Estimate

Steps the floor down to a lower adjacent surface such as tile or vinyl.

Matching transitions may vary by profile. We confirm what is available for your job at your free estimate.

5″ Wide Plank · Wire Brushed Oak · Select Grade

Banff

Golden European oak, warm and open · Wire brushed oak veneer

Your Pricing

Choose Your Grade — same colour, same oak, different amount of natural character

Grade describes appearance, not durability. Switching grades also switches to that grade’s own photographs above.

Material Only

Regular: $11.99 / sq ft

$6.29 / sq ft

5″ wide wire brushed oak · Select Grade

20.18 sq ft per box  ·  about $126.93 per box

What does grade mean?

Need Professional Installation?

Calculate your project estimate

Our installers handle the subfloor preparation confirmed in your estimate, the installation itself, and all transitions and trim. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply.

Book a Free In-Home Estimate →

No obligation · Installation is quoted in writing at your free in-home estimate.

Installation pricing depends on room sizes, subfloor condition, stairs and layout — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Real Oak Veneer
Bolton Showroom

More Colours in This Range

Camel herringbone engineered hardwoodCamelCharacter5″$5.89 / sq ftCharacter Grade
Honey Wheat herringbone engineered hardwoodHoney WheatSelect / Select & Better5″From $6.29 / sq ftSelect Grade
Macaroon herringbone engineered hardwoodMacaroonSelect / Select & Better5″From $6.29 / sq ftSelect Grade
Moon Light herringbone engineered hardwoodMoon LightSelect / Select & Better5″From $6.29 / sq ftSelect Grade
Naked Oak herringbone engineered hardwoodNaked OakSelect / Select & Better5″From $6.29 / sq ftSelect Grade
Pearl herringbone engineered hardwoodPearlCharacter / Select5″From $5.89 / sq ftCharacter Grade
Silver Stone herringbone engineered hardwoodSilver StoneSelect5″$6.99 / sq ftSelect Grade
Sky herringbone engineered hardwoodSkyCharacter5″$5.89 / sq ftCharacter Grade
View all engineered hardwood colours →

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $6.29 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

Each box covers 20.18 sq ft, so the box count is worked out from that and always rounded up to a whole box.

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 20.18 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Understanding Hardwood Grades

Grade is a look, not a quality level

Grade describes how the face of the boards looks — how much natural knotting and colour movement they carry. It is never a measure of quality or durability: every board is the same wirebrushed oak on the same engineered construction with the same engineered construction. Choose by how clean or how natural you want the floor to look — neither direction is a lesser floor.

Oak flooring grades explained — AB Select & Better is the cleanest look, ABC Select Grade balances natural character, ABCD Character Grade is full of warmth and personality

Banff is supplied in Select Grade (ABC) and Select & Better Grade (AB) — find it on the scale above.

Select Grade

$6.29 / sq ft

was $11.99

Select Grade gives a cleaner, more balanced appearance with less variation than Character Grade.

Select & Better Grade

$7.49 / sq ft

was $12.99

Select & Better Grade is the cleanest, calmest face — fewer markings and a tighter colour range, which suits the long unbroken lines of a patterned floor.

Full-size boards are in our Bolton showroom — the honest way to judge a grade is to stand on it.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official engineered hardwood spec sheet and installation guide.

PatternHerringbone
Product CodeNot published by the manufacturer for this range
Wood SpeciesEuropean Oak
Plank Width5″
Total Thickness3/4″
Nominal Size5″ x 3/4″
Plank LengthFixed length, set by the pattern module — to be confirmed — ask us and we will verify it for your quote
ConstructionEngineered multi-layer hardwood — real wood veneer over an engineered core
Hardwood Veneer3 mm real wood veneer
Appearance GradeSelect Grade — appearance only, never quality
Grades AvailableSelect Grade (ABC) · Select & Better Grade (AB) — grades offered in this colour
Surface TextureWire brushed
FinishFactory-applied UV cured lacquer
Gloss LevelTo be confirmed — ask us and we will verify it for your quote
Edge ProfileTongue & groove system
Hardness (Janka)To be confirmed — ask us and we will verify it for your quote
Radiant HeatTo be confirmed — ask us and we will verify it for your quote
InstallationGlue Assist with Nail Down, or Full Glue Down installation recommended
Coverage / Box20.18 sq ft
Ideal HumidityTo be confirmed — ask us and we will verify it for your quote
Ideal TemperatureTo be confirmed — ask us and we will verify it for your quote
CertificationTo be confirmed — ask us and we will verify it for your quote
WarrantyManufacturer’s published terms — to be confirmed — ask us and we will verify it for your quote
Material Price$6.29 / sq ft  ·  ~$126.93 / box (20.18 sq ft)
Professional InstallationAvailable. Calculate your project estimate
1

Real Wire Brushed Oak

The surface is genuine oak — actual timber with its own grain and colour movement, wire brushed to bring out the texture. No two boards are identical, because no two trees are.

2

Verified From the Official Listing

Every figure marked in gold comes straight from the manufacturer’s own official product listing and specification sheet — 20.18 sq ft per box, herringbone pattern, 5″ width and a 3 mm veneer. Where a specification is not published, this page says so plainly rather than guessing.

3

Grade Is Appearance, Never Quality

Banff is supplied in Select Grade and Select & Better Grade. Grade describes how much natural character shows on the face of the boards — nothing about how long the floor lasts.

4

5″ Wide Plank

At 5″ wide there are fewer seams across a room, so the floor reads calmer and the space feels larger — on a substantial 3/4″ board.

5

See It In Person

Full-size boards from this range are in our Bolton showroom at 55 Healey Rd, Unit 2. Stand on the floor, take a sample home, and compare it in your own light before you decide.

Banff herringbone engineered hardwood plank detail
Oak

Construction

Real oak surface.
Engineered to stay flat.

A genuine wire brushed oak veneer on an engineered core — the wood you want to see, over the structure that keeps a 5″ plank flat through an Ontario year.

Outstanding Value

$6.29/sq ft.
Real hardwood.

At $6.29 per square foot, Banff puts a genuine wire brushed oak floor within reach of a mid-range budget — without printed images and without shortcuts. Professional installation is available. Installation is quoted in writing at your free in-home estimate. The installation work is backed by our 2-year limited workmanship warranty.

Banff herringbone engineered hardwood colour swatch
Banff

Visual Character

Golden European oak, warm and open.
Room by room.

Banff laid 5″ wide in Select Grade — see the boards at full scale above, then in person in our Bolton showroom.

Before You Buy

Choosing, buying and installing Banff herringbone

A herringbone floor is a different buy from a straight-lay floor — different layout, different waste allowance, different install. Here is what actually matters, in plain language. If anything raises a question, ask us at your free in-home estimate.

1

Is herringbone right for this room?

Banff is a golden european oak, warm and open. In a herringbone layout the boards are laid at right angles to each other so they step across the floor in a zigzag. Herringbone reads as interlocking rectangles. It is the more classic of the two patterns and it forgives a busier room better than chevron does.

Pattern floors want a clear sight line. A long open living space, a wide hallway or an entry you walk straight into is where this earns its money. In a small, chopped-up room with several doorways, much of the pattern ends up cut away at the edges.

Look at the room from the doorway you use most and decide which direction you want the pattern to travel — that decision is made before a single board goes down.

2

How much should I order?

Patterned floors generate more offcuts than straight-lay, because every perimeter board is an angled cut. Allow roughly 15% over your measured area — more if the room has bays, angled walls or several doorways.

Each box covers 20.18 sq ft. Boards are cut to the pattern module, so you cannot stretch a short board the way you can with random lengths. The calculator above works out your box count.

Order the whole job in one go. Wood is natural, and a top-up box from a later batch may not match.

3

See it laid before you commit

A single board tells you the colour. It tells you almost nothing about a herringbone floor, because the pattern only appears once several boards are together.

Grade matters more here too: the more open the grade, the more knots and colour movement repeat across the pattern. Live with a sample in the actual room for a few days — morning light, evening pot lights and a north-facing window all change how it reads.

We keep full-size boards in our Bolton showroom and can bring samples to your free estimate.

4

How does it get installed?

This is a tongue and groove engineered board. The manufacturer’s recommended method for this range is glue assist with nail down, or full glue down installation recommended.

Subfloor preparation carries more weight on a pattern than anywhere else. Every board registers off its neighbour, so a hollow or a hump does not stay local — it walks through the pattern and shows up as an open joint several rows away. We level and test the subfloor first, set out from a centre line, and dry-lay the opening rows before anything is fixed down.

The boards need time to settle in the home before installation.

Radiant heat compatibility is confirmed against the manufacturer’s documentation before quoting — ask us and we will get it in writing.

Professional Installation

How we install your floor

01

Subfloor Preparation

We start by getting the subfloor flat, clean and sound — levelling the high and low spots and securing anything loose. A hardwood floor is only ever as good as what sits underneath it. Any required subfloor preparation will be assessed and confirmed in your estimate.

02

Acclimatization

The cartons are opened and laid flat in the room so the wood can settle to the conditions it will live in. Real wood moves with the air around it, and giving it time before installation is one of the simplest things that makes a floor sit well for years.

03

Installation — Nail, Glue Assist or Full Glue

We install by the method your subfloor calls for, leaving the proper expansion gap at every wall, staggering the end joints, and drawing boards from several cartons at once so the natural colour variation blends evenly across the room rather than pooling in one corner.

04

Transitions & Trim

Transitions, stair nosing and trim finish the job. These pieces come unfinished, so the staining is done to match your floor — we will show you the profiles and walk you through the staining before anything is ordered.

Long-Term Performance

Care & Maintenance

○

Daily Care

Sweep or dry vacuum regularly with the bristles down — no beater bar. Mats at every exterior door matter more on a wood floor than on any other surface: grit tracked in from outside is what dulls a finish. The manufacturer recommends a coarse mat outside the door and a fine mat inside.

∣

Cleaning & Spills

Dry or damp mop with a standard hardwood floor cleaner and a microfibre mop — damp meaning the floor is dry again within 15 seconds. Never wet mop, and never use a steam cleaner. Wipe spills immediately; water and wood do not mix, and damage from standing water is not covered by warranty.

△

Protecting the Surface

Felt protectors under all furniture and chair legs, and never slide furniture across the floor. Keep pet nails trimmed, and avoid walking on the floor in heeled shoes. All hardwood floors will scratch and dent depending on how they are lived with — that is the trade for a genuine wood surface.

☐

Climate & Sunlight

Keep indoor relative humidity between 30% and 70% year-round — a humidifier in winter is the single best thing you can do for a wood floor in Ontario. Real wood also oxidizes and darkens under UV light; closing blinds during peak sun keeps the colour even, especially beside floor-to-ceiling windows.

Common Questions

Frequently Asked Questions

Banff is a golden european oak, warm and open, so warm whites, soft cream, pale sage and light greige sit most naturally with it. If you want a focal point, a deeper feature wall works with this tone rather than against it. Always compare a paint sample against a floor sample in your own light — we can send both home with you.

Simple, solid-coloured pieces usually look best: oatmeal and cream upholstery, light woods, black accents and natural rattan are all easy partners for a golden european oak, warm and open. Real oak already carries its own grain and colour movement, so the floor supplies the pattern.

Use warm-white bulbs around 2700K–3000K, which keep the gold in the boards gentle rather than yellow. Keep one bulb colour temperature across the whole level — mixing warm and cool bulbs is the usual reason one floor looks like two colours.

It is most at home in Scandinavian, Japandi, coastal and relaxed modern rooms. That said, tone matters more than trend — bring photos of your space to the Bolton showroom and we will match boards to the room.

Yes — it flatters white kitchens especially well, and it gives dark cabinets a soft, bright floor so the room never feels heavy.

Yes. Full-size boards are in our Bolton showroom, and you can take samples home to live with for a few days — morning light, evening pot lights and a north-facing window all change how a floor reads. We can also bring samples to your free in-home estimate.

Banff comes in Select Grade and Select & Better Grade. Grade describes appearance only — how much natural knotting and colour variation the boards carry — never quality or durability. Character Grade shows more of the oak’s natural personality and is the better value at $6.29/sq ft; Select Grade is cleaner and calmer at $7.49/sq ft. Switch between them above to see each grade’s own photographs.

It is a 5″ wide tongue and groove engineered board, fastened to a properly prepared, flat and sound subfloor. The recommended methods are nail down, or glue assist with nail down — adding glue gives an even quieter, more rigid result. We confirm the right method for your subfloor at your free in-home estimate.

Allow about 10% extra for a straight-lay room and 15% for diagonal or complex layouts. Each box covers 20.18 sq ft, and the calculator on this page works the box count out for you. We confirm exact quantities at your free in-home estimate.

The manufacturer’s warranty terms for this patterned range are confirmed in writing before you buy — we do not quote a figure we have not verified. Supply & Install projects add our own 2-year limited workmanship warranty on the installation.

Matching transitions may vary by colour and supplier availability. If a factory-finished matching transition is not available, we can usually provide unfinished transitions that can be stained to coordinate with the floor. Final colour match and availability are confirmed before ordering.

Sweep or vacuum with the beater bar off, and clean with a barely damp mop and a hardwood floor cleaner. Wipe spills promptly, use felt pads under furniture, keep indoor humidity steady through the seasons, and put mats at exterior doors.

Yes — we supply and install throughout Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, Toronto, Orangeville and the GTA. Our showroom is at 55 Healey Rd, Unit 2 in Bolton, and we would always rather you saw a full-size board in person first.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.

02

Proper Installation

Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.

03

Transparent Pricing

Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.

Manufacturer’s Published Warranty  ·  2-Year Limited Installation Workmanship Warranty

Banff is covered by the manufacturer’s own published warranty terms, which we confirm in writing before you buy rather than summarising here. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms.

Free In-Home Estimate

See it in your home before you decide

We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.