
Soft dawn blonde · 3 mm real White Ash veneer





Quick Summary About the Product
Day Break is a soft dawn blonde engineered hardwood floor in genuine White Ash: a 3 mm dry sawn wood veneer, wire brushed and BONA UV lacquered in an ultra matte finish, on a 3/4″ engineered board. At 7-1/2″ wide it is a genuine wide plank, room-friendly plank — substantial underfoot and stable enough for an Ontario winter. This colour is supplied in Select & Better Grade, which describes appearance only — how much natural knotting and colour movement the boards carry — never quality or durability.
How this floor lives: Day Break is a blonde ash in White Ash with softly warm undertones. In day-to-day light it reads as a light floor that keeps a room feeling bright without reading white. The surface is clean and uniform, with minimal knotting and low colour variation from board to board. Screens and room lighting shift wood tones, so always confirm with a physical sample from our Bolton showroom.
Similar floors: American Oak Honey Wheat 6″ (darker) · American Oak Macaroon 6″ (similar look)
At a Glance
Certified Performance
Available Accessories
Supplied unfinished — stained on site to match your floor.

Finishes the front edge of a step or a landing where the floor meets a drop.

Joins this floor to another of the same height in a doorway or opening.

Steps the floor down to a lower adjacent surface such as tile or vinyl.
Stair treads, nosings, risers, reducers, T-mouldings and quarter round are not listed for this collection by the manufacturer. Matching transitions may vary by colour and supplier availability. If a factory-finished matching transition is not available, we can usually provide unfinished transitions that can be stained to coordinate with the floor. Final colour match and availability should be confirmed before ordering.
Pre-Finished by the Manufacturer
Flush floor vent, pre-finished to coordinate with the floor.
Soft dawn blonde · Engineered multi-layer hardwood
Your Pricing
Material Only
Regular: $8.99 / sq ft
7-1/2″ wide plank · Select & Better Grade
24.43 sq ft per box · about $146.34 per box
Need Professional Installation?
Calculate your project estimate
Our installers handle the subfloor preparation confirmed in your estimate, the installation itself, and all transitions and trim. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply.
Book a Free In-Home Estimate →No obligation · Installation is quoted in writing at your free in-home estimate.
Installation pricing depends on room sizes, subfloor condition, stairs and layout — always confirmed in writing before any work begins.
Or call us: 905-872-7557
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $5.99 / sq ft.
Each carton covers 24.43 sq ft, so the carton count is worked out from that and always rounded up to a whole carton.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 24.43 sq ft per carton. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
White Ash has a clean, bright, naturally even grain — noticeably less knot-heavy than rustic oak styles. Grade describes appearance only, never durability: every grade here is the same real hardwood surface. Select Grade gives a balanced, clean look with natural wood movement. Select & Better Grade is cleaner and calmer again, for the most premium, refined appearance. Choose by how clean or how natural you want the floor to look — neither choice is a lower-quality floor. This colour comes in one grade, so there is no decision to make here — this is simply what the boards look like.
Available with our supplier in this colour: Select & Better Grade
The cleanest, calmest option — fewer markings, softer colour variation, a more refined, premium appearance.
Full-size boards are in our Bolton showroom — the honest way to judge a grade is to stand on it.
Confirmed specifications only — taken from the manufacturer’s official engineered hardwood spec sheet and installation guide.
| Collection | 7 Inch European White Ash Collection |
| Species | European White Ash |
| Plank Width | 7-1/2″ |
| Total Thickness | 3/4″ (18 mm) |
| Plank Size | 7-1/2″ x 3/4″ (195 mm x 18 mm) |
| Plank Length | Random 23.6″ – 75.2″ (600 – 1910 mm) |
| Hardwood Veneer | 3 mm dry sawn cut wood layer |
| Construction | Engineered multi-layer hardwood |
| Appearance Grade | Select & Better Grade — appearance only, never quality |
| Grades Available | Select & Better Grade (AB) |
| Surface Texture | Wire brushed |
| Finish | BONA UV lacquered · Ultra matte |
| Edge Profile | Tongue & groove · Micro bevel |
| Pattern | Plank |
| Installation | Tongue and groove profile — nail down with glue assist recommended |
| Radiant Heat | Hydronic radiant heat compatible |
| Janka Hardness | 1320 |
| Coverage / Box | 24.43 sq ft · 62 lbs per box |
| Ideal Humidity | 40%–50% |
| Ideal Temperature | 68°F – 72°F |
| Certification | FloorScore · CARB II · FSC · CE |
| Warranty | Limited 35-year finish warranty · lifetime structural warranty |
| Material Price | $5.99 / sq ft · ~$146.34 / box (24.43 sq ft) |
| Professional Installation | Available. Calculate your project estimate |
The surface is 3 mm of real White Ash — actual timber with its own grain, knots and colour movement. No two boards are identical, because no two trees are.
A dry sawn veneer is cut like a plank rather than peeled off a log. It is the reason the grain on this floor reads the way solid timber does, and it is the single specification that most affects how the floor ages.
This is a milled tongue and groove board, so it is fastened and bonded to the subfloor rather than floated. The manufacturer recommends nail down with glue assist, and the collection is listed as hydronic radiant heat compatible.
Day Break is supplied in Select & Better Grade. Every grade is the same oak, the same 3 mm veneer, the same 3/4″ board and the same warranty. What changes is how much natural character shows on the face — nothing about how long the floor lasts.
The manufacturer’s own technical documentation for this floor — full specifications, installation requirements, care guidance and the written warranty:
Specification Sheet (PDF) ↗
Installation Instructions (PDF) ↗
Maintenance & Care (PDF) ↗
Warranty (PDF) ↗
Construction
3 mm of dry sawn White Ash on a 3/4″ engineered board — the wood you want to see, over the structure that keeps it flat through an Ontario year.
Outstanding Value
At $5.99 per square foot, Day Break puts a genuine White Ash floor with a 3 mm wood veneer within reach of a mid-range budget — without printed images and without shortcuts. Professional installation is available. Installation is quoted in writing at your free in-home estimate. The installation work is backed by our 2-year limited workmanship warranty.
Visual Character
A wire brushed surface with a micro bevel edge and an ultra matte BONA lacquer, laid 7-1/2″ wide — a clean, bright board that suits Scandinavian, modern and transitional rooms.
Everything worth knowing about this floor, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Day Break is a soft dawn blonde. Warm whites, soft greige and gentle stone tones let the floor lead. If you want a focal point, a deeper feature wall works with this tone.
At 7-1/2″ wide there are fewer seams, so rooms read calmer and brighter, and the pale, even grain keeps spaces feeling bright.
Keep one bulb colour temperature across the whole level — mixing warm and cool is the usual reason a floor looks like two colours.
Allow about 10% extra for a straight-lay room, or 15% for diagonal and complex layouts. Boards come in random lengths, so a cutting allowance is normal.
Each box covers 25.32 sq ft. The calculator above works out your box count.
Order the whole job at once — wood is natural, and a later top-up batch may not match.
Live with a sample for a few days in the actual room. Morning light, evening pot lights and a north-facing window all change how it reads.
Expect real board-to-board variation — that is the point of hardwood, and why a small photo never tells the whole story.
Full-size boards are in our Bolton showroom, and we can bring samples to your free estimate.
Tongue and groove, so it is fastened and bonded to the subfloor — never floated. The manufacturer recommends nail down with glue assist.
The subfloor must be flat, clean and sound, and the boards need time to settle at 68°F – 72°F and 40%–50% humidity.
Going over in-floor radiant heat? The system must be run in first — we go through it with you before quoting.
Professional Installation
We start by getting the subfloor flat, clean and sound — levelling the high and low spots and securing anything loose. A hardwood floor is only ever as good as what sits underneath it. Any required subfloor preparation will be assessed and confirmed in your estimate.
The cartons are opened and laid flat in the room so the wood can settle to the conditions it will live in. Real wood moves with the air around it, and giving it time before installation is one of the simplest things that makes a floor sit well for years.
We install by the method your subfloor calls for — nail down with glue assist as the manufacturer recommends — leaving the proper expansion gap at every wall, staggering the end joints, and drawing boards from several cartons at once so the natural colour variation blends evenly across the room rather than pooling in one corner.
Stair treads, stair nosing, risers, vents and trim finish the job. These accessories are pre-finished for this collection, and because they are real wood, slight differences in colour, grain and texture from the floor are normal. We confirm availability and check the match before anything is ordered.
Long-Term Performance
Sweep or dry vacuum regularly with the bristles down — no beater bar. Mats at every exterior door matter more on a wood floor than on any other surface: grit tracked in from outside is what dulls a finish. The manufacturer recommends a coarse mat outside the door and a fine mat inside.
Dry or damp mop with a standard hardwood floor cleaner and a microfibre mop — damp meaning the floor is dry again within 15 seconds. Never wet mop, and never use a steam cleaner. Wipe spills immediately; water and wood do not mix, and damage from standing water is not covered by warranty.
Felt protectors under all furniture and chair legs, and never slide furniture across the floor. Keep pet nails trimmed, and avoid walking on the floor in heeled shoes. All hardwood floors will scratch and dent depending on how they are lived with — that is the trade for a genuine wood surface.
Keep indoor relative humidity between 40%–50% year-round — a humidifier in winter is the single best thing you can do for a wood floor in Ontario. Real wood also oxidizes and darkens under UV light; closing blinds during peak sun keeps the colour even, especially beside floor-to-ceiling windows.
Common Questions
Day Break is a soft dawn blonde, so warm whites, soft greige and gentle stone tones sit most comfortably with it. If you want the room to have a focal point, a deeper feature wall works with this floor rather than against it. Always compare a paint sample against a floor sample in your own light — we can send both.
Because the surface is genuine White Ash, the floor already carries real grain and colour movement, so simple solid-coloured furniture usually looks better against it than heavy patterns. Cream, oatmeal, black and natural rattan are all easy partners for Day Break.
Day Break is available in Select & Better Grade. Grade describes appearance only — how much natural knotting, mineral streak and colour movement the boards carry. It is not a measure of quality or durability. Every grade is the same White Ash, the same 3 mm veneer and the same construction, and every grade will last the same length of time. Character has the most natural character, Select is calmer, and Select & Better is the cleanest and most uniform.
No. Character Grade is the same floor with more of its natural markings showing. It is the best-value option in the range, and many people choose it deliberately because a floor with knots and colour movement looks more like real wood and hides day-to-day life better than a very clean floor does.
The veneer is the layer of real hardwood on the surface — the wood you see and walk on. At 3 mm this is a generous wear layer for an engineered floor, dry sawn rather than peeled, which is why the grain reads like solid timber. It is the main reason a 3/4″ engineered board like this holds its value over the long term. Any future sanding or refinishing should be confirmed against the manufacturer’s own guidance before you count on it.
It is a tongue and groove board, and the manufacturer recommends nail down installation with glue assist. That means it is fastened and bonded to the subfloor rather than floated. The right approach for your home depends on the product approval and the condition of your subfloor, and we confirm the details before work begins.
The manufacturer lists this collection as hydronic radiant heat compatible. Radiant projects need the system run in and the room held within the manufacturer’s temperature and humidity range — 68°F to 72°F and 40% to 50% relative humidity — so we go through the details with you before quoting.
Allow about 10% extra for a straight-lay room and 15% for diagonal or complex layouts. Boards come in random lengths from 23.7-1/2″ to 76.38″, and our calculator on this page works the carton count out for you. We confirm exact quantities at your free in-home estimate.
The manufacturer lists one pre-finished accessory for this collection — a 4″ x 10″ flush floor vent. Stair treads, nosings, risers, reducers and quarter round are not part of the published programme here. We can usually supply unfinished transitions and stair parts stained on site to coordinate with your floor. Final colour match and availability are confirmed before ordering.
Sweep or vacuum with the beater bar off, and clean with a barely damp mop and a hardwood floor cleaner. Wipe spills promptly, use felt pads under furniture, keep indoor humidity between 40% and 50%, and put mats at the doors. Full care guidance is in the manufacturer’s care guide, linked in the specifications below.
Not always, and the manufacturer says so plainly: their photography shows the highest grade, Select & Better. On this page we show the official image for each grade separately, so when you switch grades above you are seeing that grade’s own photo. Even so, wood varies board to board — see a full-size sample in our Bolton showroom before you decide.
Yes — we supply and install throughout Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, Toronto, Orangeville and the GTA. Our showroom is in Bolton and we would always rather you saw a full-size board in person first.
Why Choose Us
Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.
Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.
Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.
Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.
35-Year Limited Finish Warranty · Lifetime Structural Warranty · 2-Year Limited Installation Workmanship Warranty
This floor carries a limited 35-year finish warranty and a lifetime structural warranty from the manufacturer, valid when the floor is installed and maintained to the published instructions — including the specified indoor conditions of 68°F – 72°F and 40%–50% relative humidity. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms, or read the manufacturer’s warranty document linked in the specifications above.
Free In-Home Estimate
We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close