Skip to content
Salt Bone Subway Tile — official product image
Bolton, Ontario
4″ x 12″GlossNon-Rectified Edge

Salt Bone Subway Tile

SKU NA.SA.BON.0412.GL

A 4″ x 12″ gloss subway tile in warm, clouded bone-white. · ceramic look wall tile

Material from

$6.54/ sq ft

Book a Free Estimate
Salt Bone Subway Tile
Material
InstallationProfessional tile installation available — contact us for an estimate
Get a Quote
Salt Bone Subway Tile
Salt Bone Subway Tile — 4" x 12" Gloss face

Quick Summary About the Product

The Salt collection's warm neutral in the classic subway format: 4″ x 12″, gloss-fired, with the crystalline bone-white face drifting piece to piece at V-4. It is stocked in 4″ x 12″ in a gloss finish.

How this tile lives: It warms kitchen backsplashes and shower surrounds that would go cold in plain white, and it pairs naturally with timber, brass and cream cabinetry.

More in this series: Salt Blue · Salt Blue Subway Tile · Salt Bone · Salt Grey · Salt Grey Subway Tile

At a Glance

Selected Size
Thickness
Finish
Pieces / Box
Application
Approved Use
Per sq ft

Available Accessories

Setting & Finishing Materials

Everything the installation needs, supplied alongside your tile.

Available in storeTile MortarQuantity confirmed at estimate

Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.

Available in storeGroutQuantity confirmed at estimate

Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.

Available in storeWaterproofing & Uncoupling MembraneQuantity confirmed at estimate

Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.

Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.

Glazed Porcelain · Ceramic look · Non-rectified Edge

Salt Bone Subway Tile

SKU NA.SA.BON.0412.GL

Size
12″ x 24″
Finish

This page covers the gloss finish. The gloss and matte version is its own product — see More Colours below. This product is stocked in one size.

Your Pricing

Material Only

Glazed Porcelain ·

SKU

Need Professional Installation?

Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

Book a Free In-Home Estimate for Tiles →

No obligation · Final price confirmed in writing

Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Verified Product Data
Bolton Showroom

More Colours in This Range

Salt BlueBlue12″ x 24″ · 10″ x 22″$5.36 / sq ftBlue tone
Salt Blue Subway TileBlue4″ x 12″$6.54 / sq ftBlue tone
Salt BoneBone12″ x 24″ · 10″ x 22″$5.36 / sq ftBeige tone
Salt GreyGrey12″ x 24″ · 10″ x 22″$5.36 / sq ftLight Grey tone
Salt Grey Subway TileGrey4″ x 12″$6.54 / sq ftLight Grey tone

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $6.54 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

Each box covers 9.69 sq ft, so the box count is worked out from that and always rounded up to a whole box.

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 9.69 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.

CollectionSalt
ColourBone
Product TypeGlazed Porcelain tile
LookGlazed ceramic — soft solid colours for floors, walls and subway formats
Stock Options4″ x 12″ Gloss
Selected Size
Actual Dimensions
Finish
Edge ProfileNon-rectified — set with a slightly wider grout joint
Shade VariationV-4 — substantial variation between pieces
Thickness
SKU
Coverage / Box
Pieces / Box
Water Absorption< 3.0% — ASTM C-373, conforms
Bending / Breaking Strength> 250 lbs. — ASTM C-648, conforms
Dynamic Coefficient of Friction0.42 — ANSI A137.1/2012, conforms
Visible Surface Abrasion ResistancePEI-4 — ASTM C-1027, conforms
Chemical Resistancemin. UB / GA / GLA — ASTM C-650, conforms
Frost ResistanceRequired — ASTM C-1026, conforms
Stain Resistance> Class 3 — ASTM C-1378, conforms
Surface Abrasion (PEI)PEI-4 (ASTM C-1027 visible surface abrasion, Guide test for the glazed porcelain, reported as conforming)
Slip ClassNot specified. Dynamic COF 0.42 (ANSI A137.1/2012) conforms.
Application / Use
Approved Use —
Suitable ForWalls — interior. Not rated for floors.
Material Price
Professional InstallationAvailable — contact us for a tile installation estimate
1

A Wall Tile, Stated Plainly

The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.

2

Warmer than white, calmer than colour

Between stark white subway and committed colour sits Bone: enough warmth to flatter wood and skin tones, enough restraint to survive every future repaint. The V-4 drift gives a backsplash the hand-made character machine tile usually lacks.

3

Published Test Results

The manufacturer tests this series against 7 requirements and reports it as conforming to each: water absorption < 3.0% (ASTM C-373); bending / breaking strength > 250 lbs. (ASTM C-648); dynamic coefficient of friction 0.42 (ANSI A137.1/2012); visible surface abrasion resistance PEI-4 (ASTM C-1027); chemical resistance min. UB / GA / GLA (ASTM C-650); frost resistance Required (ASTM C-1026); stain resistance > Class 3 (ASTM C-1378). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.

Professional Installation

How we install your tile

Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

01

Substrate Preparation & Flatness

This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.

02

Tonal Blending Across Boxes

This series is rated V-4, so pieces differ noticeably in tone and figure. That variation is what stops a large area looking printed, but it has to be spread rather than left where it falls. We open several boxes, dry-lay, and blend across the room instead of working carton by carton, planning where the cuts land at the same time.

03

Mortar, Setting & Levelling

Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.

04

Grout, Protection & Finishing

Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Salt Bone Subway Tile surface detail
SO

Visual Character

Warmer than white,
calmer than colour

Between stark white subway and committed colour sits Bone: enough warmth to flatter wood and skin tones, enough restraint to survive every future repaint. The V-4 drift gives a backsplash the hand-made character machine tile usually lacks.

Salt Bone Subway Tile face
Bone

In the Room

Bone up close.
See it full size in Bolton.

No dedicated subway scene is published, so the verified tile face is shown — see the brick-lay effect at full size in Bolton.

Before You Buy

Choosing, buying and installing Salt Bone Subway Tile

Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.

1

Will it suit my room?

Kitchen backsplashes, shower and tub surrounds, bathroom walls, fireplace uppers and laundry splash zones.

This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.

Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.

2

How much should I order?

Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.

Coverage is per box for the option you have selected. The calculator above works out your box count.

Order the whole job at once. A later top-up from a different production run will not match — this is a V-4 tile and the variation between runs is real.

3

See it before you commit

Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.

Expect real piece-to-piece variation. At V-4 that variation is substantial.

Ivory grout blends; mushroom-taupe outlines. Test both against a cabinet sample before committing.

4

How does it get installed?

Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.

Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.

Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.

Long-Term Performance

Care & Maintenance

○

Everyday Cleaning

Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.

∣

Spills & Stains

Water absorption is tested to < 3.0% and the series is reported as conforming for stain resistance at > Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.

△

Traffic & Protection

Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.

☐

Grout, Long Term

The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.

Common Questions

Frequently Asked Questions

Will Bone look dirty next to a white counter?

No — it reads as deliberately warm rather than off-white, especially laid with an ivory joint. Against a cool white counter the contrast is soft and intentional.

How many pieces do I need for a backsplash?

Each box carries thirty 4 by 12 pieces covering 9.69 sq ft. Measure length times height, add about 10 per cent for cuts, and the calculator on this page does the box math from the verified coverage.

Can it be laid vertically?

Yes — vertical stack is a current favourite for this format and the gloss face suits it. The V-4 variation shifts subtly along the wall either way.

What does V-4 shade variation mean?

V-4 means substantial variation: pieces differ dramatically from one another. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.

Can this tile be used outdoors?

No — we only supply it for interior work. Frost resistance is tested and reported as conforming, which people often read as an outdoor green light, so it is worth being precise: surviving a freeze is only one of the things an exterior tile has to do. The manufacturer does not list this series for outdoor use, and it publishes no slip class for it, which matters more than frost on a wet step or a patio. Several other ranges we carry are approved for exterior work — ask us and we will point you at them.

How slippery is it underfoot?

The manufacturer reports the series as conforming to the ANSI A137.1/2012 requirement for a dynamic coefficient of friction, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.

How much tile should I order?

Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.

Can I use this on a floor?

No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.

Do I need mortar, grout or a membrane with this tile?

Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.

Can The Flooring Mart provide a tile installation estimate?

Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.

Can I see this range at the Bolton showroom before deciding?

Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.

02

Tile Set by Our Own Crew

Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.

03

Transparent Pricing

Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.

Product Warranty

The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.

Free In-Home Estimate

See it in your home before you decide

We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.