Skip to content
Royale Stone Light Grey tile — official product image
Bolton, Ontario
12″ x 24″ · 24″ x 24″ · 24″ x 48″MatteRectified Edge

Royale Stone Light Grey

SKU HV.RS.LGR.1224.MT

A pale grey stone face with a fine vein — the range's cool neutral, in every format. · stone look floor and wall tile

Material from

$4.90/ sq ft

Book a Free Estimate
Royale Stone Light Grey
Material
InstallationProfessional tile installation available — contact us for an estimate
Get a Quote
Royale Stone Light Grey tile
Royale Stone Light Grey tile — 12" x 24" Matte face
Royale Stone Light Grey — installed (official scene)

Quick Summary About the Product

Light Grey is the cool counterpart to Ivory: a pale mineral-grey ground with a delicate vein, stocked in 12″ x 24″, a 24″ square in Matte and Structured, and 24″ x 48″. The official scene runs it through a boutique with a herringbone feature wall in the same tone. It is stocked in 12″ x 24″, 24″ x 24″, 24″ x 48″, so one colour can carry across a surface without changing between areas.

How this tile lives: It suits contemporary bathrooms and kitchens, basements that need light without warmth, and commercial spaces that want a clean modern ground.

More in this series: Royale Stone Almond · Royale Stone Black · Royale Stone Ivory · Royale Stone Mocha · Royale Stone Silver

At a Glance

Selected Size
Thickness
Finish
Pieces / Box
Application
Approved Use
Per sq ft

Available Accessories

Setting & Finishing Materials

Everything the installation needs, supplied alongside your tile.

Available in storeTile MortarQuantity confirmed at estimate

Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.

Available in storeGroutQuantity confirmed at estimate

Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.

Available in storeWaterproofing & Uncoupling MembraneQuantity confirmed at estimate

Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.

Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.

Coloured-Base Porcelain · Stone look · Rectified Edge

Royale Stone Light Grey

SKU HV.RS.LGR.1224.MT

Size
Finish

Both finishes are produced in this range. Only combinations we actually stock can be selected.

Your Pricing

Material Only

Coloured-Base Porcelain ·

SKU

Need Professional Installation?

Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

Book a Free In-Home Estimate for Tiles →

No obligation · Final price confirmed in writing

Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Verified Product Data
Bolton Showroom

More Colours in This Range

Royale Stone AlmondAlmond12″ x 24″ · 24″ x 24″ · 24″ x 48″$4.90 / sq ftBeige tone
Royale Stone BlackBlack12″ x 24″ · 24″ x 24″ · 24″ x 48″$4.99 / sq ftBlack tone
Royale Stone IvoryIvory12″ x 24″ · 24″ x 24″ · 24″ x 48″$4.90 / sq ftBeige tone
Royale Stone MochaMocha24″ x 24″$4.99 / sq ftBrown tone
Royale Stone SilverSilver12″ x 24″ · 24″ x 24″ · 24″ x 48″$4.90 / sq ftGrey tone

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $4.90 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

Each box covers 15.50 sq ft, so the box count is worked out from that and always rounded up to a whole box.

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 15.50 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.

CollectionRoyale Stone
ColourLight Grey
Product TypeColoured-Base Porcelain tile
LookStone look — quiet contemporary stone in matte and structured finishes
Stock Options12″ x 24″ Matte · 24″ x 24″ Matte · 24″ x 24″ Structured · 24″ x 48″ Matte
Selected Size
Actual Dimensions
Finish
Edge ProfileRectified — for tight, even joints
Shade VariationV-2 — slight variation between pieces
Thickness
SKU
Coverage / Box
Pieces / Box
Water Absorption< 0.5% — ASTM C373-17, conforms
Dynamic C.O.F.> 0.42 — ANSI A137.1-2012, conforms
Bending / Breaking Strength> 250 lbs — ASTM-C648, conforms
Deep Abrasion Resistance< 175 mm3 — ASTM C-1243, conforms
Chemical Resistancemin. UB — ASTM C650-04, conforms
Stain ResistanceRequired — ASTM C1378-04, conforms
Surface Abrasion (PEI)Not specified
Slip ClassNot specified. Dynamic COF > 0.42 (ANSI A137.1-2012) conforms.
Application / Use
Suitable ForFloors and walls · residential
Material Price
Professional InstallationAvailable — contact us for a tile installation estimate
1

Coloured Body, Not a White One

The body of this tile is coloured to match the surface rather than left white. A chipped corner or a worn edge shows a tone close to the face instead of a bright white scar, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.

2

The grey that stays light

Many light greys sink to mid-grey the moment the sun goes down. Light Grey's high, even ground holds its brightness under artificial light, and the fine vein keeps a large floor from going featureless. V-2 variation keeps the pieces consistent without cloning.

3

Published Test Results

The manufacturer tests this series against 6 requirements and reports it as conforming to each: water absorption < 0.5% (ASTM C373-17); dynamic c.o.f. > 0.42 (ANSI A137.1-2012); bending / breaking strength > 250 lbs (ASTM-C648); deep abrasion resistance < 175 mm3 (ASTM C-1243); chemical resistance min. UB (ASTM C650-04); stain resistance Required (ASTM C1378-04). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.

Professional Installation

How we install your tile

Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

01

Substrate Preparation & Flatness

This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. The larger the format, the less forgiving it is: a rigid piece cannot follow a floor that dips, and the result shows as lippage between tiles.

02

Tonal Blending Across Boxes

This series is rated V-2, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.

03

Mortar, Setting & Levelling

Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.

04

Grout, Protection & Finishing

Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Royale Stone Light Grey tile surface detail
LG

Visual Character

The grey that
stays light

Many light greys sink to mid-grey the moment the sun goes down. Light Grey's high, even ground holds its brightness under artificial light, and the fine vein keeps a large floor from going featureless. V-2 variation keeps the pieces consistent without cloning.

Royale Stone Light Grey tile installed in a finished room
Light Grey

In the Room

Light Grey in the room.
See it full size in Bolton.

The official boutique scene shows the tone across floor and feature wall — one colour, two textures, and a room that reads bright and composed.

Before You Buy

Choosing, buying and installing Royale Stone Light Grey

Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.

1

Will it suit my room?

Contemporary bathrooms and kitchens, basements, retail and office floors, and minimalist rooms that want cool light underfoot.

The larger format shows far more uninterrupted surface between joints and suits open areas; the smaller size suits bathrooms, shower walls and niches, generates fewer awkward cuts, and gives a little more grip underfoot simply because there are more grout lines.

Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.

2

How much should I order?

Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.

Coverage is per box for the option you have selected. The calculator above works out your box count.

Order the whole job at once. A later top-up from a different production run will not match — this is a V-2 tile and the variation between runs is real.

3

See it before you commit

Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.

Expect real piece-to-piece variation. At V-2 that variation is slight but present.

Light grey grout, one shade off the ground, keeps the surface continuous.

4

How does it get installed?

Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.

Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.

Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.

Long-Term Performance

Care & Maintenance

○

Everyday Cleaning

Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.

∣

Spills & Stains

Water absorption is tested to < 0.5% and the series is reported as conforming for stain resistance at Required, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.

◎

Coloured Body, Not a White One

The body of this tile is coloured rather than left white, so a chipped corner or a worn edge shows a tone close to the face instead of a bright white scar. Damage stays far less obvious than it would on a standard tile, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.

△

Traffic & Protection

Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.

☐

Grout, Long Term

The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.

Common Questions

Frequently Asked Questions

Light Grey or Silver — how do I choose?

Light Grey is the paler, cooler of the two; Silver is a step deeper with a slightly warmer mineral cast. On a screen they nearly merge — in the showroom, side by side, the difference is immediate.

Does the Structured finish look different from the Matte?

Only slightly at eye level — the texture reads as a soft sheen change. Underfoot it adds grip. Both carry the identical printed face, so they can meet at a doorway without a visible colour step.

Can it work outdoors?

The manufacturer's published applications for this series include outdoor use, and this page states exactly what is and is not tested — see the outdoor question below for the honest detail.

What does V-2 shade variation mean?

V-2 means slight variation: pieces differ a little in tone, without dramatic jumps. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.

Can this tile be used outdoors?

Outdoor is part of the manufacturer's published recommended applications for this series, on both their website and their product guide. Being straight with you about one gap: unlike several other ranges we carry, the technical sheet for this series does not include a frost-resistance test result, so we are not going to make a frost claim for it. For an exterior project in our winters that is worth confirming, so tell us about the actual site and we will get it in writing from the supplier before you order.

How slippery is it underfoot?

The manufacturer reports the series as conforming to the ANSI A137.1-2012 requirement for a dynamic coefficient of friction, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.

How much tile should I order?

Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.

What does coloured-body porcelain mean?

The body of the tile is coloured to match the surface rather than being left white. A chip or a worn edge is far less obvious than on a standard glazed tile, which is one of the reasons this kind of porcelain gets specified for commercial floors.

Do I need mortar, grout or a membrane with this tile?

Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.

Can The Flooring Mart provide a tile installation estimate?

Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.

Can I see this range at the Bolton showroom before deciding?

Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.

02

Tile Set by Our Own Crew

Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.

03

Transparent Pricing

Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.

2-Year Limited Installation Workmanship Warranty

Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.

Free In-Home Estimate

See it in your home before you decide

We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.