
SKU VE.RV.GRY.1224
Cool grey hewn stone — the one that goes into cafes. · stone look floor and wall tile


Quick Summary About the Product
Renova Grey is a cool, mid-toned 12″ x 24″ porcelain with the split, chiselled face of hewn stone and a soft matte surface that is quieter to the touch than it looks to the eye. The grey runs from pale silver to a deeper slate within a single tile, and no two pieces repeat. It is stocked in 12″ x 24″ in a matte finish.
How this tile lives: Kitchens, entry halls and mudrooms, bathrooms and ensuites, basements, laundries, sunrooms, covered patios, and commercial floors up to high traffic — cafes, restaurants, shops and offices.
More in this series: Renova Golden Grey · Renova White · Renova Black
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU VE.RV.GRY.1224
Matte is the only finish produced in this range. This colour is stocked in one size only.
Approved for floors and walls.
Your Pricing
Material Only
Coloured-Base, Porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $7.63 / sq ft.
Each box covers 13.56 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 13.56 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Renova |
| Colour | Grey |
| Product Type | Coloured-Base, Porcelain tile |
| Look | Hewn-stone look — a rectified 12″ x 24″ published for floors, walls and outdoors, up to high commercial |
| Stock Options | 12″ x 24″ Matte |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Rectified — for tight, even joints |
| Shade Variation | V-3 — moderate variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | Tested to ISO 10545-3 |
| Bending Strength | Tested to ISO 10545-4 |
| Chemical Resistance | Tested to ISO 10545-13 |
| Frost Resistance | Tested to ISO 10545-12 |
| Dynamic C.O.F. | Tested to ANSI A137.1:2012 |
| Slip Resistance | Tested to DIN 51130 |
| Surface Abrasion (PEI) | Not published for this series. |
| Slip Class | Not published as a value. The manufacturer names two slip standards the series is tested to (ANSI A137.1:2012 Dynamic C.O.F. and DIN 51130) but publishes no figure for either, so no slip class or DCOF number is quoted and no wet-floor rating is asserted. |
| Application / Use | |
| Approved Use | — |
| Suitable For | Floors and walls · residential · light commercial · medium commercial · high commercial |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
Not every option in this range is approved for the same surfaces. Selecting a size or finish above updates the approved-use line, the specification table and the warning panel, so what you read always matches what you have chosen. Where the manufacturer says wall only, this page says wall only.
Most stone-look tiles are sold on how they look in an empty room. This one is published for high commercial traffic, which is a different claim entirely: it is the manufacturer saying the tile can take a service door and a hundred pairs of shoes a day. In a house that margin is what you feel in year eight.
The manufacturer tests this series to water absorption (ISO 10545-3) and bending strength (ISO 10545-4) and chemical resistance (ISO 10545-13) and frost resistance (ISO 10545-12) and dynamic c.o.f. (ANSI A137.1:2012) and slip resistance (DIN 51130). It publishes the standards but not a measured figure or a stated pass, so this page lists the standards and stops there rather than reporting a result it has not seen. If a project needs the certificate, ask us and we will request it.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. The larger the format, the less forgiving it is: a rigid piece cannot follow a floor that dips, and the result shows as lippage between tiles.
This series is rated V-3, so pieces differ noticeably in tone and figure. That variation is what stops a large area looking printed, but it has to be spread rather than left where it falls. We open several boxes, dry-lay, and blend across the room instead of working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
Most stone-look tiles are sold on how they look in an empty room. This one is published for high commercial traffic, which is a different claim entirely: it is the manufacturer saying the tile can take a service door and a hundred pairs of shoes a day. In a house that margin is what you feel in year eight.

In the Room
The published photograph is a working coffee bar — this exact cool grey laid across the customer floor, running under the counter and out to the seating. One tile, one surface, nothing else in the shot is from this range. It is the most useful kind of photograph for this tile, because it shows the grey under commercial lighting and at commercial scale rather than in a styled corner.
Also Available In
Complete the look with coordinating Renova Grey field tile in 2″ x 2″ — the same colourway and the same matte finish, so the pattern here and the surface around it come from one range.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Interior and exterior floors and walls — residential, light, medium and high commercial. This is one of the few ranges we stock that the manufacturer publishes all the way to high commercial traffic.
This colour is produced in one size only. Bring us the room and we will confirm it works for the layout before you order.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-3 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-3 that variation is moderate — enough to read as stone rather than as print.
A mid grey grout a shade darker than the palest part of the tile. On a V-3 face a bright white joint draws a grid over the variation you paid for, and on a floor it is the joint that discolours first — starting one step darker means the floor still looks deliberate in five years.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
The manufacturer publishes no water-absorption or stain-resistance figure for this series, so we will not quote one. Treat it as you would any glazed tile: wipe spills promptly, use a neutral cleaner and a soft nylon pad for anything dried on, and avoid metal scouring pads.
The body of this tile is coloured rather than left white, so a chipped corner or a worn edge shows a tone close to the face instead of a bright white scar. Damage stays far less obvious than it would on a standard tile, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
A lot, and that is the point of it. This range publishes a V-3 shade rating, which is the HIGH end of the scale — the colour, the veining and the depth of the hewn-stone face all move substantially from piece to piece. On a stone look that is what stops a large floor reading as printed wallpaper. Practically it means two things: a single sample chip will NOT tell you what the finished floor looks like, and the boxes must be opened together and shuffled before anything is set. We dry-lay a few square metres before the adhesive comes out, every time.
Yes, and it is one of the few ranges we can say that about from the manufacturer's own published usage rather than from a general impression. Residential, Light Commercial, Medium Commercial and High Commercial are all on its list, alongside Floors, Walls and Outdoor. Two of the four published photographs of this range are commercial rooms — a coffee bar and a loft dining room — which is a fair indication of what it was designed for. For a kitchen line or a wet entrance we would still want to talk about slip before you order; see the next question.
There isn't one published, and we will not invent one. The manufacturer names the two standards this range is tested to — Dynamic C.O.F. to ANSI A137.1:2012 and DIN 51130 — but publishes no result for either, so this page quotes no DCOF number and no R rating. If your project needs a certified slip figure, for a commercial kitchen, a ramp or a pool surround, tell us before you order and we will request the data sheet or point you at a range that publishes its results.
It means every edge is ground square after firing, so all the pieces are the same size to a fraction of a millimetre. That is what lets a large floor be set with a narrow, even joint instead of the wider one a non-rectified tile needs to absorb its own size variation. It does raise the standard the substrate has to meet: a rectified 12″ x 24″ will show a hollow or a hump in the floor that a smaller tile would hide. We level first, and we quote the levelling honestly rather than discovering it on the day.
Yes — a 2″ x 2″ square mosaic on a mesh-mounted sheet, in this same colourway and the same matte finish. It is the standard pairing for a bathroom: the large format on the walls and the floor, the mosaic in the shower base where the small squares and the extra grout let the floor fall to the drain. Both are stocked and both have a page here; the link is in the coordinating sizes panel above.
Outdoor is on the manufacturer's published usage list and the range is tested for frost resistance to ISO 10545-12, so a patio, a covered porch or a set of steps is within what it is made for in our climate. Two cautions from us rather than from the data sheet: no slip figure is published, so for anything that gets wet and walked on we would want a physical sample under your own foot first; and an exterior installation lives or dies on the base beneath it, so drainage, movement joints and an adhesive rated for outdoor use matter more than the tile does.
The six standards are published and the results are not. Water Absorption to ISO 10545-3, Bending Strength to ISO 10545-4, Chemical Resistance to ISO 10545-13, Frost Resistance to ISO 10545-12, plus the two slip standards. Knowing a tile is tested to a standard is not the same as knowing what it scored, so this page names them and stops there. What IS published, and is stated plainly above, is the body type, the shade rating, the edge type and the full usage list.
V-3 means moderate variation: pieces differ noticeably in tone and figure, the way real stone does, without the extremes of a V-4. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
Outdoor is part of the manufacturer's published recommended applications for this series, and frost resistance is tested and reported as conforming. Exterior tiling also depends on the substrate, the drainage, the setting materials and the freeze-thaw exposure of the specific site, so we will not quote an outdoor installation from a web page. Tell us about the actual project and we will confirm suitability in writing before you order.
The manufacturer reports the series as conforming to the ANSI A137.1:2012 requirement for a dynamic coefficient of friction, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
The body of the tile is coloured to match the surface rather than being left white. A chip or a worn edge is far less obvious than on a standard glazed tile, which is one of the reasons this kind of porcelain gets specified for commercial floors.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close