Skip to content
Oceani White tile — official product image
Bolton, Ontario
2.5″ x 10″GlossNon-Rectified Edge

Oceani White

SKU KD.OC.WHT.2,5X10

A clean white with a hand-pressed ripple — the classic, with a published wear rating. · colour look floor and wall tile

Material from

$8.68/ sq ft

Book a Free Estimate
Oceani White
Material
InstallationProfessional tile installation available — contact us for an estimate
Get a Quote
Oceani White tile
Oceani White tile — 2.5" x 10" Gloss face
Oceani White tile — 2.5" x 10" Matte face
Oceani White — installed (official scene)

Quick Summary About the Product

White is the reason ranges like this exist: a plain, near-neutral white on a gently uneven face, so a plain white wall still has something happening on it. It is the only colour in this range with a published surface abrasion class, and it is made in matte as well as gloss. It is stocked in 2.5″ x 10″, in gloss and matte.

How this tile lives: Kitchen splash walls, shower surrounds, bathroom and laundry walls, and floors in small rooms that want one material on every plane.

More in this series: Oceani Aqua · Oceani Black · Oceani Blue · Oceani Cherry · Oceani Emerald · Oceani Green · Oceani Jeans · Oceani Maldive · Oceani Pearl · Oceani Pink · Oceani Smoke

At a Glance

Selected Size
Thickness
Finish
Pieces / Box
Application
Approved Use
Per sq ft

Available Accessories

Setting & Finishing Materials

Everything the installation needs, supplied alongside your tile.

Available in storeTile MortarQuantity confirmed at estimate

Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.

Available in storeGroutQuantity confirmed at estimate

Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.

Available in storeWaterproofing & Uncoupling MembraneQuantity confirmed at estimate

Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.

Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.

Glazed Porcelain · Colour look · Non-rectified Edge

Oceani White

SKU KD.OC.WHT.2,5X10

Size
Finish

Both finishes are produced in this range. This colour is stocked in one size.

Your Pricing

Material Only

Glazed Porcelain ·

SKU

Need Professional Installation?

Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

Book a Free In-Home Estimate for Tiles →

No obligation · Final price confirmed in writing

Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Verified Product Data
Bolton Showroom

More Colours in This Range

Oceani AquaAqua2.5″ x 10″$8.68 / sq ftAqua tone
Oceani BlackBlack2.5″ x 10″$8.68 / sq ftBlack tone
Oceani BlueBlue2.5″ x 10″$8.68 / sq ftBlue tone
Oceani CherryCherry2.5″ x 10″$8.68 / sq ftRed tone
Oceani EmeraldEmerald2.5″ x 10″$8.68 / sq ftTeal tone
Oceani GreenGreen2.5″ x 10″$8.68 / sq ftGreen tone
Oceani JeansJeans2.5″ x 10″$8.68 / sq ftBlue Grey tone
Oceani MaldiveMaldive2.5″ x 10″$8.68 / sq ftAqua tone
Oceani PearlPearl2.5″ x 10″$8.68 / sq ftCream tone
Oceani PinkPink2.5″ x 10″$8.68 / sq ftPink tone
Oceani SmokeSmoke2.5″ x 10″$8.68 / sq ftGrey tone

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $8.68 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

Each box covers 8.07 sq ft, so the box count is worked out from that and always rounded up to a whole box.

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 8.07 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.

CollectionOceani
ColourWhite
Product TypeGlazed Porcelain tile
LookSolid colour — hand-formed subway face with a soft undulation
Stock Options2.5″ x 10″ Gloss · 2.5″ x 10″ Matte
Selected Size
Actual Dimensions
Finish
Edge ProfileNon-rectified — set with a slightly wider grout joint
Shade VariationV-1 — uniform appearance
Thickness
SKU
Coverage / Box
Pieces / Box
Water Absorption< 0.5% — ISO 10545-3, conforms
Bending / Breaking Strength> 1300 N — ISO 10545-4, conforms
Modulus of Rupture> 35 N/mm2 — ISO 10545-4, conforms
Dynamic Coefficient of Friction> 0.42 — ANSI A137.1/2012, conforms
Slip ResistanceR-9 — DIN 51130/51097, conforms
Deep Abrasion Resistance< 175 mm3 — ISO 10545-4, conforms
Visible Surface Abrasion ResistancePEI-4 — ISO 10545-4, conforms
Chemical Resistancemin. UB — ISO 10545-13, conforms
Frost ResistanceRequired — ISO 10545-12, conforms
Stain Resistance> Class 3 — ISO 10545-14, conforms
Surface Abrasion (PEI)PEI-4
Slip ClassR-9 (DIN 51130/51097). Dynamic C.O.F. 0.42 (ANSI A137.1/2012) conforms.
Application / Use
Approved Use —
Suitable ForFloors and walls · residential · light commercial
Material Price
Professional InstallationAvailable — contact us for a tile installation estimate
1

Approved Use Changes With Your Choice

Not every option in this range is approved for the same surfaces. Selecting a size or finish above updates the approved-use line, the specification table and the warning panel, so what you read always matches what you have chosen. Where the manufacturer says wall only, this page says wall only.

2

Plain white, with a surface

Flat white subway tile is the safe default and it looks like a default. The pressed roll here changes that for no extra cost or complexity: the same white, the same brick offset, but with a highlight along every course that a flat tile cannot give you.

3

Published Test Results

The manufacturer tests this series against 10 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); bending / breaking strength > 1300 N (ISO 10545-4); modulus of rupture > 35 N/mm2 (ISO 10545-4); dynamic coefficient of friction > 0.42 (ANSI A137.1/2012); slip resistance R-9 (DIN 51130/51097); deep abrasion resistance < 175 mm3 (ISO 10545-4); visible surface abrasion resistance PEI-4 (ISO 10545-4); chemical resistance min. UB (ISO 10545-13); frost resistance Required (ISO 10545-12); stain resistance > Class 3 (ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.

Professional Installation

How we install your tile

Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

01

Substrate Preparation & Flatness

This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.

02

Tonal Blending Across Boxes

This series is rated V-1, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.

03

Mortar, Setting & Levelling

Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.

04

Grout, Protection & Finishing

Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Oceani White tile surface detail
OC

Visual Character

Plain white,
with a surface

Flat white subway tile is the safe default and it looks like a default. The pressed roll here changes that for no extra cost or complexity: the same white, the same brick offset, but with a highlight along every course that a flat tile cannot give you.

Oceani White tile installed in a finished room
White

In the Room

White in the room.
See it full size in Bolton.

The official scene tiles a bathroom wall in the gloss version behind a round basin, and the light running along the crests is the whole difference between this and a flat white. The matte version is not separately photographed.

Before You Buy

Choosing, buying and installing Oceani White

Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.

1

Will it suit my room?

Kitchen splash walls, shower and tub surrounds, bathroom and laundry walls, and floors in small bathrooms and utility rooms.

This colour is produced in one size only. Bring us the room and we will confirm it works for the layout before you order.

Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.

2

How much should I order?

Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.

Coverage is per box for the option you have selected. The calculator above works out your box count.

Order the whole job at once. A later top-up from a different production run will not match — this is a V-1 tile and the variation between runs is real.

3

See it before you commit

Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.

Expect real piece-to-piece variation. At V-1 that variation is minimal.

White grout for a soft continuous surface; mid-grey for the classic outlined subway look. In a shower we seal whichever you choose — grout is what ages, not the tile.

4

How does it get installed?

Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.

Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.

Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.

Long-Term Performance

Care & Maintenance

○

Everyday Cleaning

Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.

∣

Spills & Stains

Water absorption is tested to < 0.5% and the series is reported as conforming for stain resistance at > Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.

△

Traffic & Protection

Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.

☐

Grout, Long Term

The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.

Common Questions

Frequently Asked Questions

Is the white warm or cold?

Close to neutral, with a very faint warm drift. If you want a definitely warm off-white, the Pearl in the same range is the one to ask for; if you want a cool bright white, this is as close as this range goes.

Why does this colour have a wear rating when the others don't?

Because that is how the manufacturer publishes it — the abrasion class in the technical table is marked "White only". We report what is published rather than applying one colour's result to eleven others.

Can I run it across the floor and up the wall?

Yes, and in a small bathroom it is the simplest way to make the room feel larger. We set the wall and floor joints out so they line through, which is what makes the trick actually work.

What does V-1 shade variation mean?

V-1 means uniform appearance, with very little difference between pieces. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.

Can this tile be used outdoors?

No — we only supply it for interior work. Frost resistance is tested and reported as conforming, which people often read as an outdoor green light, so it is worth being precise: surviving a freeze is only one of the things an exterior tile has to do. The manufacturer does not list this series for outdoor use, and it publishes no slip class for it, which matters more than frost on a wet step or a patio. Several other ranges we carry are approved for exterior work — ask us and we will point you at them.

How slippery is it underfoot?

This series publishes a R-9 slip class under DIN 51130/51097, and is also reported as conforming to the ANSI A137.1/2012 requirement for dynamic coefficient of friction. That class is a series-level figure, so we will not stretch it to describe one particular finish. No tile is non-slip in every condition — for a shower floor, a pool surround or a specification with a stated slip requirement, bring us the requirement and we will advise.

How much tile should I order?

Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.

Can I use this on a floor?

The manufacturer does approve this tile for floors, and the approved-use line updates with the size and finish you select. In practice we recommend it as a wall tile. A small glossy rectangle means a lot of grout underfoot, and a gloss glaze is slippery once it is wet, so we would not put it in a shower base, a bathroom floor or an entry. Where it does work well is a dry, low-traffic floor — a powder room, a hearth, a decorative inset. Ask us before you commit and we will tell you honestly whether it suits your room, or show you a floor-rated tile from the same colour family.

Do I need mortar, grout or a membrane with this tile?

Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.

Can The Flooring Mart provide a tile installation estimate?

Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.

Can I see this range at the Bolton showroom before deciding?

Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.

02

Tile Set by Our Own Crew

Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.

03

Transparent Pricing

Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.

2-Year Limited Installation Workmanship Warranty

Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.

Free In-Home Estimate

See it in your home before you decide

We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.