Skip to content
Metropolis White tile — official product image
Bolton, Ontario
2″ x 8″ · 3″ x 6″ · 3″ x 12″ · 4″ x 16″ · 12″ x 24″Gloss

Metropolis White

SKU ST.MS.WHT.0208.GL

The reference white subway — five sizes, two finishes, one clean colour. · ceramic look wall tile

Material from

$3.72/ sq ft

Book a Free Estimate
Metropolis White
Material
InstallationProfessional tile installation available — contact us for an estimate
Get a Quote
Metropolis White tile
Metropolis White tile — 2" x 8" Gloss face
Metropolis White — installed (official scene)

Quick Summary About the Product

White is where Metropolis starts and where most projects end up. A clean, slightly warm white glaze on a flat wall tile, offered in more sizes than any other colour in the range, so the same white can run as a tight 3″ x 6″ classic or a broad 12″ x 24″ panel. The range runs 2″ x 8″, 3″ x 6″, 3″ x 12″, 4″ x 16″ and 12″ x 24″ — note that only the 12″ x 24″ is rectified; every smaller size has a natural, non-rectified edge. It is stocked in 2″ x 8″, 3″ x 6″, 3″ x 12″, 4″ x 16″, 12″ x 24″, so one colour can carry across a surface without changing between areas.

How this tile lives: It is the safe, correct answer for a kitchen backsplash, a shower surround, a laundry, or any wall that has to look finished without competing with the cabinetry in front of it.

More in this series: Metropolis Black · Metropolis Deep Violet · Metropolis Cool Grey · Metropolis Platinum Grey · Metropolis Warm Grey · Metropolis Linen · Metropolis Clover · Metropolis Red · Metropolis Navy Blue · Metropolis Royal Blue

At a Glance

Selected Size
Thickness
Finish
Pieces / Box
Application
Approved Use
Per sq ft

Available Accessories

Setting & Finishing Materials

Everything the installation needs, supplied alongside your tile.

Available in storeTile MortarQuantity confirmed at estimate

Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.

Available in storeGroutQuantity confirmed at estimate

Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.

Available in storeWaterproofing & Uncoupling MembraneQuantity confirmed at estimate

Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.

Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.

Wall Tile · Ceramic look · Per Edge

Metropolis White

SKU ST.MS.WHT.0208.GL

Size
Finish

Both finishes are produced in this range. Only combinations we actually stock can be selected.

Your Pricing

Material Only

Wall Tile ·

SKU

Need Professional Installation?

Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

Book a Free In-Home Estimate for Tiles →

No obligation · Final price confirmed in writing

Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Verified Product Data
Bolton Showroom

More Colours in This Range

Metropolis BlackBlack3″ x 6″ · 3″ x 12″$4.40 / sq ftBlack tone
Metropolis Deep VioletDeep Violet3″ x 12″$4.85 / sq ftPurple tone
Metropolis Cool GreyCool Grey3″ x 6″ · 3″ x 12″$4.03 / sq ftLight Grey tone
Metropolis Platinum GreyPlatinum Grey3″ x 6″ · 3″ x 12″$4.03 / sq ftGrey tone
Metropolis Warm GreyWarm Grey3″ x 6″ · 3″ x 12″$4.03 / sq ftGreige tone
Metropolis LinenLinen3″ x 6″ · 3″ x 12″$4.03 / sq ftCream tone
Metropolis CloverClover3″ x 12″$4.85 / sq ftGreen tone
Metropolis RedRed3″ x 12″$5.10 / sq ftRed tone
Metropolis Navy BlueNavy Blue3″ x 12″$4.85 / sq ftNavy tone
Metropolis Royal BlueRoyal Blue3″ x 12″$4.85 / sq ftBlue tone

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $3.72 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

Each box covers 15.50 sq ft, so the box count is worked out from that and always rounded up to a whole box.

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 15.50 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.

CollectionMetropolis
ColourWhite
Product TypeWall Tile
LookClassic subway — a flat glazed wall tile in five formats
Stock Options2″ x 8″ Gloss · 2″ x 8″ Matte · 3″ x 6″ Gloss · 3″ x 6″ Matte · 3″ x 12″ Gloss · 3″ x 12″ Matte · 4″ x 16″ Gloss · 4″ x 16″ Matte · 12″ x 24″ Gloss · 12″ x 24″ Matte
Selected Size
Actual Dimensions
Finish
Edge ProfileNon-rectified — set with a slightly wider grout joint
Shade VariationNot specified — no shade-variation rating published for this series
Thickness
SKU
Coverage / Box
Pieces / Box
Technical TestingNot published — the manufacturer provides no technical-test table for this series
Surface Abrasion (PEI)Not published — this is a wall tile and the manufacturer publishes no abrasion class.
Slip ClassNot published — this is a wall tile.
Application / Use
Approved Use —
Suitable ForWalls — interior. Not rated for floors.
Material Price
Professional InstallationAvailable — contact us for a tile installation estimate
1

A Wall Tile, Stated Plainly

The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.

2

One white, five formats

The format changes the room more than people expect. A 3″ x 6″ gives you the traditional brick-bond backsplash; the 4″ x 16″ and 12″ x 24″ give a calmer wall with far fewer joints. Same glaze throughout, so you can mix formats in one room and keep the colour identical.

3

What Is — and Is Not — Published

The manufacturer publishes no technical-test table for this series at all — no water absorption, no coefficient of friction, no frost rating and no abrasion class. Other ranges we carry do, and where they do we list every result. Here we would rather tell you the data does not exist than borrow figures from a similar-looking product. If you need certified values for a specification, ask us and we will request them from the supplier in writing.

Professional Installation

How we install your tile

Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

01

Substrate Preparation & Flatness

This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.

02

Tonal Blending Across Boxes

The manufacturer publishes no shade-variation rating for this series, so we treat it the way we treat any tile: open several boxes, dry-lay, and blend across the area rather than working carton by carton, planning where the cuts land at the same time.

03

Mortar, Setting & Levelling

Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.

04

Grout, Protection & Finishing

Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Metropolis White tile surface detail
MW

Visual Character

One white,
five formats

The format changes the room more than people expect. A 3″ x 6″ gives you the traditional brick-bond backsplash; the 4″ x 16″ and 12″ x 24″ give a calmer wall with far fewer joints. Same glaze throughout, so you can mix formats in one room and keep the colour identical.

Metropolis White tile installed in a finished room
White

In the Room

White in the room.
See it full size in Bolton.

The official scene runs the white field across a full bathroom wall, laid in a standard offset bond.

Before You Buy

Choosing, buying and installing Metropolis White

Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.

1

Will it suit my room?

Interior walls only. Metropolis is a wall tile and carries no floor rating.

This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.

Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.

2

How much should I order?

Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.

Coverage is per box for the option you have selected. The calculator above works out your box count.

Order the whole job at once. A later top-up from a different production run will not reliably match.

3

See it before you commit

Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.

The manufacturer publishes no shade-variation rating for this series, so judge the consistency from physical samples rather than from a figure.

White subway is the one place a contrasting grout genuinely works — a soft grey joint gives you the classic look. Just decide before you start: dark grout on white tile is a design choice you cannot reverse without re-grouting.

4

How does it get installed?

Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.

Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.

Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.

Long-Term Performance

Care & Maintenance

○

Everyday Cleaning

Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.

∣

Spills & Stains

The manufacturer publishes no water-absorption or stain-resistance figure for this series, so we will not quote one. Treat it as you would any glazed tile: wipe spills promptly, use a neutral cleaner and a soft nylon pad for anything dried on, and avoid metal scouring pads.

△

Traffic & Protection

Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.

☐

Grout, Long Term

The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.

Common Questions

Frequently Asked Questions

What does rectified mean here?

A rectified tile is cut square after firing, so it can be laid with a very tight grout line. In Metropolis only the 12″ x 24″ is rectified; every smaller size keeps a natural non-rectified edge and wants a normal joint. The page updates the edge type as soon as you pick a size, so you are never guessing.

Which size should I pick for a backsplash?

3″ x 6″ if you want the traditional look, 3″ x 12″ if you want something a little more current, 4″ x 16″ if you want fewer grout lines behind a busy countertop. Bring us your measurements and we will tell you how each one lands in your actual run.

How much do the tiles vary from one another?

The manufacturer publishes no shade-variation rating for this series, so we cannot quote you one. In practice expect the normal piece-to-piece variation of a printed tile. We dry-lay and blend from several boxes before setting anything regardless of what is published.

Can this tile be used outdoors?

No. This series is published for interior use only, and its documentation contains no frost-resistance test. We will not supply it for an exterior application. Several other ranges we carry do carry outdoor approval — ask us and we will point you at them.

How slippery is it underfoot?

We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.

How much tile should I order?

Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.

Can I use this on a floor?

No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.

Do I need mortar, grout or a membrane with this tile?

Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.

Can The Flooring Mart provide a tile installation estimate?

Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.

Can I see this range at the Bolton showroom before deciding?

Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.

02

Tile Set by Our Own Crew

Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.

03

Transparent Pricing

Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.

Product Warranty

The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.

Free In-Home Estimate

See it in your home before you decide

We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.