
Cool pale grey, the easiest neutral here · basalt stone look porcelain floor & wall tile



Quick Summary About the Product
Lea Stone Light Grey is the practical pale — a clean, faintly cool grey with the same fine basalt grain. Light enough to keep a room open, dark enough to live with. It is stocked in 12″ x 24″, 24″ x 24″, 24″ x 48″, all matte, so one colour can carry across a floor and up a wall without changing between rooms.
How this tile lives: If you like the pale end of the range but the thought of Ivory in a hallway worries you, this is the answer. It sits far enough down the tonal ladder to hide day-to-day dust, and still returns plenty of light. It is also the most versatile colour in the series for open-plan floors, because it works with warm timber and cool paintwork equally well.
More in this series: Lea Stone White · Lea Stone Ivory · Lea Stone Grey · Lea Stone Earth · Lea Stone Dark Grey · Lea Stone Black
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. On a plain, low-contrast stone look the grout colour changes the finished floor more than any other decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
Matte is the only finish produced in this range. Only sizes we actually stock can be selected.
Your Pricing
Material Only
Unglazed full-body porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, tonal blending, setting, levelling, grout and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Tile installation depends on the tile size, layout, site conditions and the preparation required, so we quote it properly rather than publishing a number.
Book a Free In-Home Estimate →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $4.89 / sq ft.
Each box covers 26.86 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 26.86 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Lea Stone |
| Colour | LIGHT GREY |
| Product Type | Unglazed full-body porcelain tile |
| Look | Stone look — basalt |
| Stock Options | 12″ x 24″ Matte · 24″ x 24″ Matte · 24″ x 48″ Matte |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Rectified — for tight, even joints |
| Shade Variation | V-2 — slight variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | < 0.5% — ASTM C373-17, conforms |
| Dynamic Coefficient of Friction | > 0.42 — ANSI A137.1-2012, conforms |
| Bending / Breaking Strength | > 250 lbs. — ASTM C648, conforms |
| Deep Abrasion Resistance | < 175 mm3 — ASTM C1243, conforms |
| Chemical Resistance | min. UB — ASTM C650-04, conforms |
| Stain Resistance | > Class 3 — ASTM C1378-04, conforms |
| Surface Abrasion (PEI) | Not applicable — PEI rates glaze wear and this tile is unglazed; no class published |
| Slip Class | Not specified — no slip class published for this series |
| Suitable For | Floors and walls · residential · light, medium and high commercial · interior use |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
This is unglazed, full-body porcelain: the colour and the material run right through the tile rather than sitting in a surface glaze. A chipped edge shows the same colour instead of a white body underneath, which is why this kind of tile gets specified for floors that have to take real use.
A light grey ground with a very slight cool cast and an even sand grain. Matte and low contrast, so the surface stays calm across a large area.
Water absorption under 0.5%, dynamic coefficient of friction above 0.42, breaking strength above 250 lbs, deep abrasion resistance under 175 mm³, chemical resistance of at least UB and stain resistance above Class 3 — all reported as conforming to the minimum rather than as measured numbers. Where the manufacturer publishes no figure, this page says so rather than borrowing one.
Professional Installation
This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. On a low-contrast stone look with tight joints there is nowhere for an uneven floor to hide. Any required subfloor preparation will be assessed and confirmed in your estimate.
This series is rated V-2, so pieces vary slightly in tone and grain. Slight variation is what keeps a large floor from looking printed, but it has to be spread rather than left to fall where it lands. We open several boxes, dry-lay, and blend pieces across the room instead of working carton by carton, and we plan where the cuts fall at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise on a large-format tile: hollow spots are invisible on handover day and turn into a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast stone look the joint decides whether the floor reads as one surface or as a grid. It is the single biggest decision after the colour itself. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
A light grey ground with a very slight cool cast and an even sand grain. Matte and low contrast, so the surface stays calm across a large area.
Large Format
A 24″ x 48″ piece covers four times the area of the 12″ x 24″, so the same room needs a fraction of the joints. On a plain stone look that matters more than it does on a patterned tile: with fewer lines interrupting it, the floor reads as one continuous surface rather than as a grid. The trade-off is that a rigid piece that long needs a genuinely flat substrate, which is exactly what our preparation stage is for. Professional floor installation is available, backed by our 2-year limited workmanship warranty.

In the Room
Light Grey installed as a continuous floor. Useful for judging how the colour behaves across a big span — low-contrast greys can look flatter in a photograph than they do in a room where light falls unevenly across them.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Comfortable with almost any cabinetry. Especially good with mid and dark timber, where it gives a clean contrast without going stark, and with matte black or brushed steel hardware. Against very warm terracotta or orange-toned oak the cool cast can look slightly at odds — in that case Earth or White is the better call.
The 24″ x 48″ shows far more uninterrupted floor between joints and suits open plans; the 24″ x 24″ is the easiest square to lay out in a regular room; the 12″ x 24″ suits smaller rooms, shower walls and niches, and gives more grip underfoot simply because there are more grout lines.
Keep one bulb colour temperature across the whole level. On a low-contrast stone look, mixing warm and cool light is the usual reason a floor looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match, even on a V-2 tile.
Live with a full-size piece for a few days in the actual room. The seven colours in this range differ mainly in how light or dark they are rather than in pattern, and that is exactly the quality a screen renders differently on every monitor.
Expect some piece-to-piece variation. At V-2 that variation is slight — enough to read as stone rather than as print, and not enough to unsettle a large floor.
A mid grey a shade or two darker than the tile. It will still look like part of the floor after five years, which a pale grout will not.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Large-format tile needs a flatter substrate than small tile, because a rigid 24″ x 48″ piece cannot follow a floor that is not level. Preparation is quoted honestly after we have seen the room.
Mortar, grout and membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. An unglazed matte porcelain needs nothing stronger. The one habit that keeps a matte floor looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes matte tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is under 0.5% and the series is tested for stain resistance to better than Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.
The colour runs all the way through this tile rather than sitting in a surface glaze. If an edge chips, what shows underneath is the same colour rather than a white body, so damage stays far less obvious than it would on a glazed tile. It is one of the practical reasons unglazed full-body porcelain gets specified for floors that have to last.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter more on the palest and the darkest colours in this range than on the mid greys.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
Light Grey and Grey. Both sit in the middle of the tonal range where dust and dry grit are least visible, and both come in all three sizes so you can run the same colour through different rooms at different scales. Light Grey keeps a space feeling open; Grey is the more forgiving of the two.
It allows one. Rectified means the edges are mechanically ground to a precise size, so the tiles can be set with a tighter, more even joint than a pressed tile. That is what gives a large-format floor its seamless look. It does mean the substrate has to be genuinely flat, which is why we quote floor levelling separately when a subfloor needs it.
Yes, and it is a good way to handle a home where one room wants a 24" x 48" and a smaller room would end up all cuts. The colour and finish are identical across sizes in this series. Bring us your room dimensions and we will work out where the size change should fall.
V-2 means slight variation: pieces differ a little in tone and grain from one another, without the noticeable swings of a V-3 or the dramatic ones of a V-4. It is enough to stop a large floor looking printed and mild enough that the floor still reads as one calm surface. It is also why we dry-lay and blend from several boxes before setting anything.
No — it is unglazed, full-body porcelain. The colour and the material run right through the tile instead of sitting in a glaze on top. That is why a chip is far less obvious than on a glazed tile, and it is also why there is no PEI rating for this series: PEI measures how a glaze wears, and there is no glaze here to measure.
It is a matte, unglazed surface, which is the less slippery end of the tile range. The manufacturer reports the series as conforming to the ANSI A137.1-2012 requirement for a dynamic coefficient of friction greater than 0.42, but publishes no measured figure and no slip class, so we will not quote you a number. No tile is non-slip in every condition. If you have a specific slip requirement for a commercial job, bring us the spec.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. All three sizes cover 15.50 sq ft per box, but the piece counts differ, and the calculator on this page works from the exact size you select.
The manufacturer tests the series against six requirements and reports it as conforming to each: water absorption under 0.5%% (ASTM C373-17), dynamic coefficient of friction above 0.42 (ANSI A137.1-2012), breaking strength above 250 lbs (ASTM C648), deep abrasion resistance under 175 mm³ (ASTM C1243), chemical resistance of at least UB (ASTM C650-04) and stain resistance better than Class 3 (ASTM C1378-04). Every one is published as a pass against the minimum rather than as a measured number. Ask us for the technical sheet if you need it for a specification.
The manufacturer's own product guide lists the recommended applications as residential and commercial, indoor, on walls and on floors. We publish it as an interior tile on that basis. If you are considering it for an exterior application, speak to us first and we will get written confirmation from the supplier before you order rather than assume.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. The seven colours in this range differ mainly in how light or dark they are rather than in pattern, and that is the one thing a screen gets wrong — every monitor renders it differently. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close