
SKU GE.LR.TPE.0810
The deepest colour here — a grey-brown wall tile. · stone look wall tile

Quick Summary About the Product
Taupe is the darkest and most earthen of the three: a grey-brown 8″ x 10″ wall tile with the range's satin matte face and soft mottling. Against the cream it reads as genuinely warm; against the grey it reads as genuinely brown. It is stocked in 8″ x 10″ in a satin matte finish.
How this tile lives: Bathroom and ensuite walls, powder rooms, tub surrounds, fireplace surrounds, kitchen walls, and traditional interiors built around timber and stone.
More in this series: La Riserva Grey Wall Tile · La Riserva Ivory Wall Tile · La Riserva Grey Floor Tile · La Riserva Ivory Floor Tile · La Riserva Taupe Floor Tile
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for showers, tub surrounds and splash zones. Whether your wall needs one — and which one — depends on the room and what is behind the tile. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU GE.LR.TPE.0810
This page covers the satin matte finish. The matte version is its own product — see More Colours below. This product is stocked in one size.
WALL USE ONLY — the manufacturer does not approve this option for floors.
Your Pricing
Material Only
Glazed Wall Tile ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $3.20 / sq ft.
Each box covers 10.76 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 10.76 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | La Riserva |
| Colour | Taupe Wall |
| Product Type | Glazed Wall Tile |
| Look | Rustic stone look — a wall tile and a matching floor tile, with borders and inserts |
| Stock Options | 8″ x 10″ Satin Matte |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Non-rectified — set with a slightly wider grout joint |
| Shade Variation | V-2 — slight variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Technical Testing | Not published — the manufacturer provides no technical-test table for this series |
| Surface Abrasion (PEI) | Not specified |
| Slip Class | Not specified. No coefficient of friction or slip class is published for this series. |
| Application / Use | |
| Approved Use | — |
| Suitable For | Walls — interior. Not rated for floors. |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.
Taupe is the colour people reach for when cream is too pale and brown is too heavy. On a variegated rustic face it does something neither can: it gives a wall real depth of tone without ever becoming a dark room.
The manufacturer publishes no technical-test table for this series at all — no water absorption, no coefficient of friction, no frost rating and no abrasion class. Other ranges we carry do, and where they do we list every result. Here we would rather tell you the data does not exist than borrow figures from a similar-looking product. If you need certified values for a specification, ask us and we will request them from the supplier in writing.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.
This series is rated V-2, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
Taupe is the colour people reach for when cream is too pale and brown is too heavy. On a variegated rustic face it does something neither can: it gives a wall real depth of tone without ever becoming a dark room.

In the Room
No published room photograph shows this colour. The series has exactly one scene and it is a warm cream, which is used on Ivory. This page shows this tile's own verified face rather than borrowing a scene in the wrong colour.
Companion Pieces
A complementary border strip, published in Grey only. Kept OUT of the field tile's size selector - the Realstone Ceppo precedent. Size 4" x 8".
A decorative insert set into the field, priced per piece. Not a field-tile variant. Size 8" x 10".
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Interior walls only. The manufacturer publishes this size as wall tile, and the 13″ x 13″ is the only size in the range suitable to be walked on.
This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-2 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-2 that variation is slight but present.
A taupe or warm grey grout close to the tile. A cream joint against a taupe tile draws a pale grid across the wall and undoes the depth the colour is there for.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished surface looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
The manufacturer publishes no water-absorption or stain-resistance figure for this series, so we will not quote one. Treat it as you would any glazed tile: wipe spills promptly, use a neutral cleaner and a soft nylon pad for anything dried on, and avoid metal scouring pads.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
No. The manufacturer states plainly that the 8″ x 10″ is wall tile only, and we hold to that. If you want this look on the ground, the 13″ x 13″ in the same range is made for it and matches this tile by design — that is the pairing the range was built around.
That is exactly how the range is meant to be used, and it is the reason it exists in two bodies. The 8″ x 10″ is the wall member of the pair and the 13″ x 13″ is the one made for the ground, and because they are manufactured as a matched pair the colour reads as one material from the skirting to the ceiling. What you cannot do is swap them: the 8″ x 10″ is not rated to be walked on, and we will not supply it for that no matter how well it matches.
Noticeably, and deliberately. This range publishes a V-2 shade rating and its own description calls the colours lightly variegated — the whole character is a soft mottling that stops the surface reading as a printed sheet. Practically that means opening several boxes and mixing them before setting, so no two near-identical pieces land side by side. We dry-lay before setting for exactly this reason.
Yes. The range includes a colour-matched listello — a narrow border strip that runs as a band at chair-rail height or under a cornice — and a Venetian insert, a decorative square set into the field. Both are ordered by the piece rather than by the square foot and are priced separately from the field tile. Availability by colour is limited: the listello and the insert are both stocked in Grey only, so ask us before you plan a border into a drawing.
None, and we would rather say that plainly than fill the gap. This range has no published technical guide — no water absorption figure, no breaking strength, no slip result. What IS published is the body type, the shade rating and the manufacturer's own statement about which size goes where, and those are the things stated on this page. If your project needs certified figures, tell us before you order and we will ask for the data sheet or point you at a range that publishes one.
V-2 means slight variation: pieces differ a little in tone, without dramatic jumps. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
No. This series is published for interior use only, and its documentation contains no frost-resistance test. We will not supply it for an exterior application. Several other ranges we carry do carry outdoor approval — ask us and we will point you at them.
We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.
Every tile installation needs the correct mortar and grout, and a wet wall - a shower, a tub surround, a splash zone - may also call for a waterproofing membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
Product Warranty
The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close