
SKU MC.GZ.BRI.0310.GL
A soft off-white fluted tile — quiet, warm, and never flat. · porcelain look wall tile




Quick Summary About the Product
Gazelle is a narrow 3″ x 10″ glazed porcelain tile with a gently rounded face, so a wall of it reads as fluting rather than as tile. The white is warm rather than clinical, which is what keeps a full wall of it feeling calm instead of cold. It is stocked in 3″ x 10″ in a gloss finish.
How this tile lives: It is the safe choice when the wall has to recede — a coffee-bar backsplash, a bathroom run behind a basin, a full-height feature in a room where the joinery is doing the talking.
More in this series: Gazelle Burro · Gazelle Carmello · Gazelle Posidonia · Gazelle Red
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU MC.GZ.BRI.0310.GL
Gloss is the only finish produced in this range. This colour is stocked in one size only.
WALL USE ONLY — the manufacturer does not approve this option for floors.
Your Pricing
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Pricing for this product is confirmed by the store.
Please call us at 905-872-7557 or visit the Bolton showroom and we will confirm the current price and availability for you right away. The free in-home estimate below is unaffected.
Box coverage is not published for this tile. We confirm the exact box quantity with you before you order.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Gazelle |
| Colour | White |
| Product Type | Glazed Porcelain tile |
| Look | Fluted profile — a rounded glazed face in a narrow wall format |
| Stock Options | 3″ x 10″ Gloss |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Non-rectified — set with a slightly wider grout joint |
| Shade Variation | V-2 — slight variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Technical Testing | Not published — the manufacturer provides no technical-test table for this series |
| Surface Abrasion (PEI) | Not published for this series on the series page or in the configurator. |
| Slip Class | Not published — the Usage list approves walls, not floors, so no slip class is given. |
| Application / Use | |
| Approved Use | — |
| Suitable For | Walls — interior. Not rated for floors. |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.
The rounded face gives you the ribbed look in a material that takes water, heat and a scrubbing brush. It is approved for interior and exterior walls, so the same tile can run from an indoor splashback out onto a covered terrace wall.
The manufacturer publishes no technical-test table for this series at all — no water absorption, no coefficient of friction, no frost rating and no abrasion class. Other ranges we carry do, and where they do we list every result. Here we would rather tell you the data does not exist than borrow figures from a similar-looking product. If you need certified values for a specification, ask us and we will request them from the supplier in writing.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.
This series is rated V-2, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
The rounded face gives you the ribbed look in a material that takes water, heat and a scrubbing brush. It is approved for interior and exterior walls, so the same tile can run from an indoor splashback out onto a covered terrace wall.

In the Room
The official scene runs it as a full fluted wall behind a basin, where the rounded profile catches a soft vertical highlight down each tile.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Interior and exterior walls. Not rated for floors.
This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-2 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-2 that variation is slight but present.
Match the grout to the tile. The fluting is the feature; a contrasting grout line turns it into a grid and kills the effect.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
The manufacturer publishes no water-absorption or stain-resistance figure for this series, so we will not quote one. Treat it as you would any glazed tile: wipe spills promptly, use a neutral cleaner and a soft nylon pad for anything dried on, and avoid metal scouring pads.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
This range sits outside our current published price list, so we quote it per project rather than post a figure we cannot stand behind. Call the showroom with your square footage and we will price it properly, including delivery and installation if you want it.
On exterior walls, yes — that is the manufacturer's own approval. It is not rated for floors, indoors or out, so it is a cladding tile rather than a patio tile.
V-2 means slight variation: pieces differ a little in tone, without dramatic jumps. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
Outdoor is part of the manufacturer's published recommended applications for this series, on both their website and their product guide. Being straight with you about one gap: unlike several other ranges we carry, the technical sheet for this series does not include a frost-resistance test result, so we are not going to make a frost claim for it. For an exterior project in our winters that is worth confirming, so tell us about the actual site and we will get it in writing from the supplier before you order.
We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
Product Warranty
The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close