
SKU HV.CS.FOG.1224.MT
Mid granular stone, the only anti-slip option here · stone look floor and wall tile


Quick Summary About the Product
Common Stone Fog is the mid tone of the three — a soft, finely granular stone look with a faint warmth to it, and the only colour in the range offered with an anti-slip surface. It is stocked in 12″ x 24″, in matte and anti slip.
How this tile lives: Mid tones are the practical choice for a floor that has to work, because they sit at the point where neither light dust nor darker grit announces itself first. What makes Fog worth singling out is the second surface option: alongside the standard matte face it is produced with a rough-textured anti-slip finish, which the other two colours are not. If you have a wet room, a pool surround, a ramp or a commercial entrance in mind, that is the variant to look at.
More in this series: Common Stone Off White · Common Stone Smoke
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU HV.CS.FOG.1224.MT
Both finishes are produced in this range. This colour is stocked in one size.
Your Pricing
Material Only
Coloured-Base Porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $5.00 / sq ft.
Each box covers 15.50 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 15.50 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Common Stone |
| Colour | Cream Brown / Fog |
| Product Type | Coloured-Base Porcelain tile |
| Look | Stone look — fine granular face |
| Stock Options | 12″ x 24″ Matte · 12″ x 24″ Anti Slip |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Rectified — for tight, even joints |
| Shade Variation | V-2 — slight variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | < 0.5% — ASTM C373-17, conforms |
| Dynamic C.O.F. | > 0.42 — ANSI A137.1-2012, conforms |
| Bending / Breaking Strength | > 250 lbs. — ASTM-C648, conforms |
| Deep Abrasion Resistance | < 175 mm3 — ASTM C-1243, conforms |
| Chemical Resistance | min. UB — ASTM C650-04, conforms |
| Slip Resistance | R-9 — DIN 51130/51097, conforms |
| Surface Abrasion (PEI) | Not specified. |
| Slip Class | R-9 (DIN 51130/51097). This is the only numeric slip class published anywhere in this intake. It is a SERIES-level figure — the Guide does not break it out by finish — so it must NOT be presented as the rating of the Anti Slip variant specifically. The Anti Slip variant's own class is not published. Three gallery filenames contain the string 'r10'; filenames are not authoritative and R-9 is what the Guide prints. |
| Application / Use | |
| Suitable For | Floors and walls · residential |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
The body of this tile is coloured to match the surface rather than left white. A chipped corner or a worn edge shows a tone close to the face instead of a bright white scar, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.
A mid-tone granular ground with a subtle warmth. Available as a standard matte face, and as a deliberately rough-textured surface the manufacturer describes as a rough sand finish.
The manufacturer tests this series against 6 requirements and reports it as conforming to each: water absorption < 0.5% (ASTM C373-17); dynamic c.o.f. > 0.42 (ANSI A137.1-2012); bending / breaking strength > 250 lbs. (ASTM-C648); deep abrasion resistance < 175 mm3 (ASTM C-1243); chemical resistance min. UB (ASTM C650-04); slip resistance R-9 (DIN 51130/51097). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. The larger the format, the less forgiving it is: a rigid piece cannot follow a floor that dips, and the result shows as lippage between tiles.
This series is rated V-2, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
A mid-tone granular ground with a subtle warmth. Available as a standard matte face, and as a deliberately rough-textured surface the manufacturer describes as a rough sand finish.

In the Room
No official room photograph could be matched to this colour with confidence, so the verified tile face is shown here rather than a scene that might belong to another product.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Sits comfortably with both warm and cool schemes, which is the advantage of a mid neutral. Good with oak, black hardware and brushed steel. If you are pairing it with the Off White or the Smoke in one project, all three share the same body and thickness and set flush together.
This colour is produced in one size only. Bring us the room and we will confirm it works for the layout before you order.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-2 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-2 that variation is slight but present.
Match it closely. On the anti-slip face use a grout you are comfortable maintaining — a deliberately textured surface holds more than a smooth one, and a mid tone hides that better than a pale grout would.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is tested to < 0.5% and reported as conforming, so spills sit on the surface rather than soaking in. Wipe them up and use a soft nylon pad with a neutral cleaner for anything dried on. Avoid metal scouring pads.
The body of this tile is coloured rather than left white, so a chipped corner or a worn edge shows a tone close to the face instead of a bright white scar. Damage stays far less obvious than it would on a standard tile, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
The anti-slip face is deliberately textured — the manufacturer describes it as a rough sand surface. It is designed for places where a smooth tile would be a hazard when wet. Being straight with you: the published R-9 slip class for this range is a series-level figure and the manufacturer does not publish a separate, higher figure for the anti-slip variant. If you need a certified slip rating for a specification, ask us and we will request it rather than guess.
Close to neutral with a slight warmth. Worth flagging that the manufacturer's own two sources describe it differently — the website simply calls it Fog, which sounds cool, while the product guide calls it a cream brown, which sounds much warmer. We measured the official tile face and it sits between the two. This is a colour to see in person rather than order from a screen.
Because we could not confirm one. There is an unassigned photograph in the manufacturer's gallery, but its filename names a colour this range does not have and the floor in it is far darker than the verified tile face. Rather than show you something that is probably a different product, we are showing you the tile.
V-2 means slight variation: pieces differ a little in tone, without dramatic jumps. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
Outdoor is part of the manufacturer's published recommended applications for this series, on both their website and their product guide. Being straight with you about one gap: unlike several other ranges we carry, the technical sheet for this series does not include a frost-resistance test result, so we are not going to make a frost claim for it. For an exterior project in our winters that is worth confirming, so tell us about the actual site and we will get it in writing from the supplier before you order.
This series publishes a R-9 slip class under DIN 51130/51097, and is also reported as conforming to the ANSI A137.1-2012 requirement for dynamic coefficient of friction. That class is a series-level figure, so we will not stretch it to describe one particular finish. No tile is non-slip in every condition — for a shower floor, a pool surround or a specification with a stated slip requirement, bring us the requirement and we will advise.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
The body of the tile is coloured to match the surface rather than being left white. A chip or a worn edge is far less obvious than on a standard glazed tile, which is one of the reasons this kind of porcelain gets specified for commercial floors.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close