
SKU GE.CI.TPE.1224
Mid warm taupe, the deepest in the range · stone look floor and wall tile


Quick Summary About the Product
Callisto Taupe is the darkest and most characterful of the four — a mid warm-grey taupe that gives a bathroom depth instead of brightness. It is stocked in 12″ x 24″, in matte and 3d decor.
How this tile lives: Taupe is the colour for a room that already has enough light and wants some weight instead. It works particularly well as a full wall behind a white basin or bath, where the contrast does the work. As a mid tone it is the most forgiving of the four for everyday marks. One important practical difference: unlike White, Grey and Ivory, this colour carries no published abrasion rating, which is worth knowing before you specify it for a busy floor.
More in this series: Callisto White · Callisto Ivory · Callisto Grey
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU GE.CI.TPE.1224
Both finishes are produced in this range. This colour is stocked in one size.
WALL USE ONLY — the manufacturer does not approve this option for floors.
Approved for floors and walls.
Your Pricing
Material Only
Glazed Porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $4.60 / sq ft.
Each box covers 11.63 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 11.63 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Callisto |
| Colour | Taupe |
| Product Type | Glazed Porcelain tile |
| Look | Stone look — fine, lightly textured surface |
| Stock Options | 12″ x 24″ Matte · 12″ x 24″ 3D Decor |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Not specified. Neither the series page nor the Product Guide publishes an edge type for this series. |
| Shade Variation | V-3 — moderate variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | < 0.5% — ISO 10545-3, conforms |
| Dynamic C.O.F. | 0.42 — ANSI A137.1-2012, conforms |
| Bending / Breaking Strength | > 250 lbs. — ISO 10545-4, conforms |
| Modulus of Rupture | min. UB — ISO 10545-4, conforms |
| Scratch Hardness | MOHs 5 — MOHs Scale, conforms |
| Chemical Resistance | min. UB — ISO 10545-13, conforms |
| Visible Surface Abrasion Resistance | PEI-4 — ISO 10545-7, conforms |
| Stain Resistance | n/a — ISO 10545-14, conforms |
| Surface Abrasion (PEI) | Not specified — no abrasion class published for this colour |
| Slip Class | Not specified. DCOF conformity only. |
| Application / Use | |
| Approved Use | — |
| Suitable For | Floors and walls · residential · light commercial · medium commercial |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
Not every option in this range is approved for the same surfaces. Selecting a size or finish above updates the approved-use line, the specification table and the warning panel, so what you read always matches what you have chosen. Where the manufacturer says wall only, this page says wall only.
A warm grey-brown ground in a matte glaze, noticeably deeper than the other three and the only colour in the range with real tonal weight.
The manufacturer tests this series against 8 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); dynamic c.o.f. 0.42 (ANSI A137.1-2012); bending / breaking strength > 250 lbs. (ISO 10545-4); modulus of rupture min. UB (ISO 10545-4); scratch hardness MOHs 5 (MOHs Scale); chemical resistance min. UB (ISO 10545-13); visible surface abrasion resistance PEI-4 (ISO 10545-7); stain resistance n/a (ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Before anything is set we check the substrate for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. Almost every tile problem that shows up later starts here, which is why we will not skip it or rush it.
This series is rated V-3, so pieces differ noticeably in tone and figure. That variation is what stops a large area looking printed, but it has to be spread rather than left where it falls. We open several boxes, dry-lay, and blend across the room instead of working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
A warm grey-brown ground in a matte glaze, noticeably deeper than the other three and the only colour in the range with real tonal weight.

In the Room
No official room photograph exists for Taupe, so the verified tile face is shown here rather than a scene borrowed from another colour.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Very strong with white sanitaryware, brass and warm timber. It also does something the pale colours cannot: it makes a small room feel considered rather than just bright. Pair it with warm rather than cool whites.
This colour is produced in one size only. Bring us the room and we will confirm it works for the layout before you order.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-3 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-3 that variation is moderate — enough to read as stone rather than as print.
A mid taupe matched close to the tile, or a shade darker if you want the grid to read deliberately. Pale grout against a mid tone discolours visibly in a wet area.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is tested to < 0.5% and the series is reported as conforming for stain resistance at n/a, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
Because the manufacturer's own technical sheet qualifies the abrasion result as applying to White, Grey and Ivory only. Taupe is specifically excluded. We do not know why, and we are not going to invent a rating for it. If PEI matters for your project — a busy floor or a commercial one — choose one of the other three or ask us to request the data.
Both, which is what taupe means. It is a warm grey with a brown cast. Against a cool grey it looks brown; against a beige it looks grey. Bring a sample home and look at it next to your own materials.
Taupe, comfortably. It sits in the middle of the tonal range, so neither light dust nor darker marks stand out the way they would on a pale tile. In a family bathroom it is the practical pick of the four.
V-3 means moderate variation: pieces differ noticeably in tone and figure, the way real stone does, without the extremes of a V-4. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
No. This series is published for interior use only, and its documentation contains no frost-resistance test. We will not supply it for an exterior application. Several other ranges we carry do carry outdoor approval — ask us and we will point you at them.
The manufacturer reports the series as conforming to the ANSI A137.1-2012 requirement for a dynamic coefficient of friction, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
Only the option the manufacturer approves for floors, and this page tells you which as soon as you select it — the approved-use line and the warning panel both update with your choice. We will not supply a wall-only tile as flooring, whatever the area involved.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close