
SKU VN.CV.WHT.2424HNDC.N
Decorative feature tile, 24" square · marble look floor and wall tile

Quick Summary About the Product
The Ambra Decor is the feature piece of the Calacatta Vintage range — the same honed marble look, worked into a decorative face designed to be used as an accent rather than as a whole floor. It is stocked in 24″ x 24″ in a honed finish.
How this tile lives: Decors earn their keep in small, deliberate quantities: a shower niche, a band above a vanity, a panel behind a freestanding bath, a feature strip in an entrance. Because it shares the body, the thickness and the honed finish of the plain Vintage tile, it sets flush with it and takes the same grout — which is exactly what you want from an accent, and not something every decor tile manages.
More in this series: Calacatta Vintage White
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU VN.CV.WHT.2424HNDC.N
Honed is the only finish produced in this range. This colour is stocked in one size only.
Your Pricing
Material Only
Coloured-Base Porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $19.02 / sq ft.
Each box covers 11.61 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 11.61 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Calacatta Vintage |
| Colour | White — Ambra Decor |
| Product Type | Coloured-Base Porcelain tile |
| Look | Marble look — honed, warm white with grey veining |
| Stock Options | 24″ x 24″ Honed |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Rectified — for tight, even joints |
| Shade Variation | V-2 — slight variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | < 0.5% — ISO 10545-3, conforms |
| Dynamic C.O.F. | > 0.42 — ANSI A137.1-2012, conforms |
| Bending / Breaking Strength | > 1300N — ISO 10545-4, conforms |
| Chemical Resistance | min. UB — ISO 10545-13, conforms |
| Frost Resistance | Required — ISO 10545-12, conforms |
| Visible Surface Abrasion Resistance | PEI-4 — ISO 10545-7, conforms |
| Surface Abrasion (PEI) | PEI 4. |
| Slip Class | Not specified. DCOF conformity to > 0.42 only. |
| Application / Use | |
| Suitable For | Floors and walls · residential · light commercial · medium commercial · heavy commercial |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
The body of this tile is coloured to match the surface rather than left white. A chipped corner or a worn edge shows a tone close to the face instead of a bright white scar, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.
A decorative 24″ square in the Calacatta Vintage body, honed to match the plain tile so the two can be combined in one installation without a step or a colour break.
The manufacturer tests this series against 6 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); dynamic c.o.f. > 0.42 (ANSI A137.1-2012); bending / breaking strength > 1300N (ISO 10545-4); chemical resistance min. UB (ISO 10545-13); frost resistance Required (ISO 10545-12); visible surface abrasion resistance PEI-4 (ISO 10545-7). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. The larger the format, the less forgiving it is: a rigid piece cannot follow a floor that dips, and the result shows as lippage between tiles.
This series is rated V-2, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
A decorative 24″ square in the Calacatta Vintage body, honed to match the plain tile so the two can be combined in one installation without a step or a colour break.

In the Room
No official photograph shows this decor installed, so the tile face itself is shown here rather than a room scene borrowed from another product. Come and see the physical piece.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Designed to be used with the plain Calacatta Vintage White. Pair it with warm metals and painted joinery. Use it sparingly — a decor works because the surfaces around it are quiet.
This colour is produced in one size only. Bring us the room and we will confirm it works for the layout before you order.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-2 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-2 that variation is slight but present.
Use the same warm off-white you use on the plain tile. A decor should read as part of the same surface, not as a panel stuck onto it.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is tested to < 0.5% and reported as conforming, so spills sit on the surface rather than soaking in. Wipe them up and use a soft nylon pad with a neutral cleaner for anything dried on. Avoid metal scouring pads.
The body of this tile is coloured rather than left white, so a chipped corner or a worn edge shows a tone close to the face instead of a bright white scar. Damage stays far less obvious than it would on a standard tile, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
You can, but it is rarely the right call. Decors are designed to be a moment in an installation. Used wall to wall the pattern stops registering as special and starts competing with everything else in the room. Come and look at it against the plain tile and we will help you work out the proportion.
It shares the same series body, the same 10 mm thickness and the same honed finish, so it sets flush and takes the same grout. The face is deliberately different — that is the point of it. Bring both samples home together before committing.
Because we do not have one for this exact product. There is a bathroom photograph in the range that includes a decorative band, but we have not been able to confirm that the band is this tile, so we have not used it. We would rather show you the honest tile face than a picture that might be a different product.
V-2 means slight variation: pieces differ a little in tone, without dramatic jumps. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.
Outdoor is part of the manufacturer's published recommended applications for this series, and frost resistance is tested and reported as conforming. Exterior tiling also depends on the substrate, the drainage, the setting materials and the freeze-thaw exposure of the specific site, so we will not quote an outdoor installation from a web page. Tell us about the actual project and we will confirm suitability in writing before you order.
The manufacturer reports the series as conforming to the ANSI A137.1-2012 requirement for a dynamic coefficient of friction, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
The body of the tile is coloured to match the surface rather than being left white. A chip or a worn edge is far less obvious than on a standard glazed tile, which is one of the reasons this kind of porcelain gets specified for commercial floors.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close