Skip to content
Blend Class tile — official product image
Bolton, Ontario
12″ x 24″ · 24″ x 24″ · 32″ x 32″MatteRectified Edge

Blend Class

SKU BC.BL.CLS.1224

Pale cement look, the lightest in the range · cement look floor and wall tile

Material from

$8.43/ sq ft

Book a Free Estimate
Blend Class
Material
InstallationProfessional tile installation available — contact us for an estimate
Get a Quote
Blend Class tile
Blend Class tile — 12" x 24" Matte face
Blend Class tile — 24" x 24" Matte face
Blend Class — installed (official scene)

Quick Summary About the Product

Blend Class is the palest of the five — a soft, lightly clouded grey-white with the flat, fine-grained face of poured concrete rather than the veining of a stone. It is stocked in 12″ x 24″, 24″ x 24″, 32″ x 32″, so one colour can carry across a surface without changing between areas.

How this tile lives: It is the colour for making a space feel larger and quieter. In a bathroom or an ensuite short on daylight it gives back more light than anything else in this range, and the gentle clouding stops it reading as a plain builder's white. Across a big open floor the 32″ square reads almost as one continuous surface. Be honest with yourself about a back entry, though: the palest colour always shows dry grit first.

More in this series: Blend Concept · Blend Elite · Blend Master · Blend Urban

At a Glance

Selected Size
Thickness
Finish
Pieces / Box
Application
Approved Use
Per sq ft

Available Accessories

Setting & Finishing Materials

Everything the installation needs, supplied alongside your tile.

Available in storeTile MortarQuantity confirmed at estimate

Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.

Available in storeGroutQuantity confirmed at estimate

Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.

Available in storeWaterproofing & Uncoupling MembraneQuantity confirmed at estimate

Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.

Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.

Coloured-Base Porcelain · Cement look · Rectified Edge

Blend Class

SKU BC.BL.CLS.1224

Size
Finish

Matte is the only finish produced in this range. Only sizes we actually stock can be selected.

Your Pricing

Material Only

Coloured-Base Porcelain ·

SKU

Need Professional Installation?

Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

Book a Free In-Home Estimate for Tiles →

No obligation · Final price confirmed in writing

Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.

Or call us: 905-872-7557

Free In-Home Estimate
Verified Product Data
Bolton Showroom

More Colours in This Range

Blend ConceptConcept12″ x 24″ · 24″ x 24″ · 32″ x 32″$8.43 / sq ftBeige tone
Blend EliteElite12″ x 24″ · 24″ x 24″ · 32″ x 32″$8.43 / sq ftGreen tone
Blend MasterMaster12″ x 24″ · 24″ x 24″ · 32″ x 32″$8.43 / sq ftGrey tone
Blend UrbanUrban12″ x 24″ · 24″ x 24″ · 32″ x 32″$8.43 / sq ftGrey tone

Flooring Calculator

Estimate your material cost

Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $8.43 / sq ft.

—Boxes Needed
—Total Coverage
—Estimated Material Total

Each box covers 11.63 sq ft, so the box count is worked out from that and always rounded up to a whole box.

For the best current deal, call or visit our showroom before placing your order.

Estimate covers material only, based on 11.63 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.

Email me this estimate

Name and email are required. A phone number is required to email the estimate and optional for the PDF.

We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.

Technical Specifications

Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.

CollectionBlend
ColourWhite
Product TypeColoured-Base Porcelain tile
LookCement look — smooth poured-concrete face
Stock Options12″ x 24″ Matte · 24″ x 24″ Matte · 32″ x 32″ Matte
Selected Size
Actual Dimensions
Finish
Edge ProfileRectified — for tight, even joints
Shade VariationV-2 — slight variation between pieces
Thickness
SKU
Coverage / Box
Pieces / Box
Water Absorption< 0.5% — ISO 10545-3, conforms
Dynamic C.O.F.> 0.42 — ANSI A137.1-2012, conforms
Bending / Breaking Strength> 1300N — ISO 10545-4, conforms
Chemical Resistancemin. UB — ISO 10545-13, conforms
Frost ResistanceRequired — ISO 10545-12, conforms
Stain Resistance> Class 3 — ISO 10545-14, conforms
Surface Abrasion (PEI)Not specified — no abrasion class is published for this series.
Slip ClassNot specified — conformity to the ANSI A137.1-2012 requirement above 0.42 only, with no class and no measured figure published.
Application / Use
Suitable ForFloors and walls · residential
Material Price
Professional InstallationAvailable — contact us for a tile installation estimate
1

Coloured Body, Not a White One

The body of this tile is coloured to match the surface rather than left white. A chipped corner or a worn edge shows a tone close to the face instead of a bright white scar, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.

2

Pale concrete ground. Soft, even clouding.

A light grey-white face with gentle tonal drift and a fine matte grain. It diffuses light rather than bouncing it back, which is what keeps a large area of it calm.

3

Published Test Results

The manufacturer tests this series against 6 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); dynamic c.o.f. > 0.42 (ANSI A137.1-2012); bending / breaking strength > 1300N (ISO 10545-4); chemical resistance min. UB (ISO 10545-13); frost resistance Required (ISO 10545-12); stain resistance > Class 3 (ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.

Professional Installation

How we install your tile

Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.

01

Substrate Preparation & Flatness

This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. The larger the format, the less forgiving it is: a rigid piece cannot follow a floor that dips, and the result shows as lippage between tiles.

02

Tonal Blending Across Boxes

This series is rated V-2, so the pieces are relatively consistent — but relatively is not identical, and production runs still differ. We open several boxes, dry-lay and blend across the area rather than working carton by carton, planning where the cuts land at the same time.

03

Mortar, Setting & Levelling

Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.

04

Grout, Protection & Finishing

Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Blend Class tile surface detail
Class

Visual Character

Pale concrete ground.
Soft, even clouding.

A light grey-white face with gentle tonal drift and a fine matte grain. It diffuses light rather than bouncing it back, which is what keeps a large area of it calm.

Blend Class tile installed in a finished room
Class

In the Room

Class in the room.
See it full size in Bolton.

Class through a bright interior. Pale cool surfaces shift more than any other colour between daylight and warm evening lamps, so judge a full-size piece in your own room.

Before You Buy

Choosing, buying and installing Blend Class

Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.

1

Will it suit my room?

A quiet background for almost anything — pale oak, walnut, black hardware, brushed nickel. Especially good in a small bathroom where the job is to give light back. Against a very warm cream paint it can read slightly cold; Concept is the better match there.

The larger format shows far more uninterrupted surface between joints and suits open areas; the smaller size suits bathrooms, shower walls and niches, generates fewer awkward cuts, and gives a little more grip underfoot simply because there are more grout lines.

Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.

2

How much should I order?

Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.

Coverage is per box for the option you have selected. The calculator above works out your box count.

Order the whole job at once. A later top-up from a different production run will not match — this is a V-2 tile and the variation between runs is real.

3

See it before you commit

Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.

Expect real piece-to-piece variation. At V-2 that variation is slight but present.

A pale grey a shade darker than the tile rather than a bright white. Bright white grout in a wet area looks immaculate for one season and then discolours against a clouded face.

4

How does it get installed?

Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.

Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.

Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.

Long-Term Performance

Care & Maintenance

○

Everyday Cleaning

Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.

∣

Spills & Stains

Water absorption is tested to < 0.5% and the series is reported as conforming for stain resistance at > Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.

◎

Coloured Body, Not a White One

The body of this tile is coloured rather than left white, so a chipped corner or a worn edge shows a tone close to the face instead of a bright white scar. Damage stays far less obvious than it would on a standard tile, which is one of the practical reasons this kind of porcelain gets specified for surfaces that take real use.

△

Traffic & Protection

Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.

☐

Grout, Long Term

The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.

Common Questions

Frequently Asked Questions

The name gives me no idea what colour this is. What is it?

Fair — the five names in this range are trade names, not colours. Class is the white one: a cool pale grey-white. The manufacturer's own guide lists it as White. We put the real colour on every page here for exactly that reason.

Is this a marble look or a concrete look?

Concrete. There is no veining and no stone figure — it is a smooth, softly clouded cement face. If you want veining, the Calacatta and Carrara ranges are where to look.

Which size should I use in a small bathroom?

The 12″ x 24″ in most cases. It generates fewer awkward cuts in a small room, works on a shower wall as well as the floor, and the extra joints give a little more grip underfoot. Save the 32″ square for open floors where fewer joints is the whole point.

What does V-2 shade variation mean?

V-2 means slight variation: pieces differ a little in tone, without dramatic jumps. It is the industry scale for how much pieces differ from one another, and it is why we dry-lay and blend from several boxes before setting anything.

Can this tile be used outdoors?

Outdoor is part of the manufacturer's published recommended applications for this series, and frost resistance is tested and reported as conforming. Exterior tiling also depends on the substrate, the drainage, the setting materials and the freeze-thaw exposure of the specific site, so we will not quote an outdoor installation from a web page. Tell us about the actual project and we will confirm suitability in writing before you order.

How slippery is it underfoot?

The manufacturer reports the series as conforming to the ANSI A137.1-2012 requirement for a dynamic coefficient of friction, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.

How much tile should I order?

Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.

What does coloured-body porcelain mean?

The body of the tile is coloured to match the surface rather than being left white. A chip or a worn edge is far less obvious than on a standard glazed tile, which is one of the reasons this kind of porcelain gets specified for commercial floors.

Do I need mortar, grout or a membrane with this tile?

Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.

Can The Flooring Mart provide a tile installation estimate?

Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.

Can I see this range at the Bolton showroom before deciding?

Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.

Why Choose Us

The Flooring Mart Difference

01

Bolton’s Local Experts

Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.

02

Tile Set by Our Own Crew

Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.

03

Transparent Pricing

Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.

04

One-Stop Service

Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.

2-Year Limited Installation Workmanship Warranty

Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.

Free In-Home Estimate

See it in your home before you decide

We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.