
SKU 525404
Deep teal green, gloss glazed, in a long narrow format · ceramic look floor and wall tile


Quick Summary About the Product
A long, narrow glazed ceramic in a deep teal green, with the uneven depth of a hand-glazed surface — some pieces read darker, some catch the light differently, and no two are quite identical. It is stocked in 2.4″ x 9.5″ in a gloss finish.
How this tile lives: This is a wall tile with real character. The gloss glaze pools and varies across each piece, so a full wall shifts as the light moves across it. At 2.4 inches by 9.5 inches it is longer and slimmer than a standard subway, which makes a wall look wider or taller depending on how it is laid.
More in this series: Atmosphere 2.4" x 9.5" Earth Gloss · Atmosphere 2.4" x 9.5" Neptune Gloss · Atmosphere 2.4" x 9.5" Mercury Gloss · Atmosphere 2.4" x 9.5" Milky Way Gloss
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU 525404
Gloss is the only finish produced in this range. This colour is stocked in one size only.
Approved for floors and walls.Use — Backsplash, Kitchen Floor, Kitchen Wall, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Wall, Commercial Floor, Accent Walls, Fireplace surrounds, pools and spas
Your Pricing
Material Only
Ceramic ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $13.75 / sq ft.
Each box covers 5.44 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 5.44 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Atmosphere |
| Colour | Northern Lights |
| Product Type | Ceramic tile |
| Look | Glazed ceramic — long narrow gloss format |
| Stock Options | 2.4″ x 9.5″ Gloss |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Application / Use | |
| Approved Use | — |
| Suitable For | Floors and walls |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
Not every option in this range is approved for the same surfaces. Selecting a size or finish above updates the approved-use line, the specification table and the warning panel, so what you read always matches what you have chosen. Where the manufacturer says wall only, this page says wall only.
The variation is the product. A machine-uniform gloss tile looks flat on a large wall; this one holds light unevenly, which is what gives a backsplash or a shower wall depth instead of a sheet of colour. Expect visible difference between pieces and plan to enjoy it rather than to hide it.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Before anything is set we check the substrate for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. Almost every tile problem that shows up later starts here, which is why we will not skip it or rush it.
The manufacturer publishes no shade-variation rating for this series, so we treat it the way we treat any tile: open several boxes, dry-lay, and blend across the area rather than working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
The variation is the product. A machine-uniform gloss tile looks flat on a large wall; this one holds light unevenly, which is what gives a backsplash or a shower wall depth instead of a sheet of colour. Expect visible difference between pieces and plan to enjoy it rather than to hide it.

In the Room
Gloss needs light to earn its keep. Under a window or a light aimed along the wall the glaze comes alive; under flat overhead light it settles down. Worth deciding the lighting alongside the tile.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Brass against teal is a combination that is very hard to get wrong. Cream, warm white and walnut all work; so does a black fitting for a sharper look. Against cool grey it loses some of its richness.
This colour is produced in one size only. Bring us the room and we will confirm it works for the layout before you order.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not reliably match.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
The manufacturer publishes no shade-variation rating for this series, so judge the consistency from physical samples rather than from a figure.
A teal or deep green grout keeps the wall reading as one colour. A pale grout outlines every piece and makes the wall considerably busier — a real option, but see it first.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished floor looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
The manufacturer publishes no water-absorption or stain-resistance figure for this series, so we will not quote one. Treat it as you would any glazed tile: wipe spills promptly, use a neutral cleaner and a soft nylon pad for anything dried on, and avoid metal scouring pads.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
It depends on the light. In a room with a window a full teal wall reads rich; in a dark windowless bathroom it can close in. A common compromise is one teal wall with the rest kept pale.
Deep teal or a dark warm grey. Keeping the joints quiet lets the glaze variation be the feature, which is what you are paying for with this tile.
Brass and unlacquered gold first, matte black second. Chrome works but reads colder. The glaze has warmth in it that metal finishes either pick up or flatten.
The manufacturer publishes no shade-variation rating for this series, so we cannot quote you one. In practice expect the normal piece-to-piece variation of a printed tile. We dry-lay and blend from several boxes before setting anything regardless of what is published.
No. This series is published for interior use only, and its documentation contains no frost-resistance test. We will not supply it for an exterior application. Several other ranges we carry do carry outdoor approval — ask us and we will point you at them.
We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
The manufacturer does approve this tile for floors, and the approved-use line updates with the size and finish you select. In practice we recommend it as a wall tile. A small glossy rectangle means a lot of grout underfoot, and a gloss glaze is slippery once it is wet, so we would not put it in a shower base, a bathroom floor or an entry. Where it does work well is a dry, low-traffic floor — a powder room, a hearth, a decorative inset. Ask us before you commit and we will tell you honestly whether it suits your room, or show you a floor-rated tile from the same colour family.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close