
Warm cream cross cut, 24" square · travertine look porcelain floor & wall tile



Quick Summary About the Product
Astrum Ivory is a warm cream travertine in cross cut only — the cloudy, open end-grain face, in a 24″ square. It is stocked in 24″ x 24″ Cross Cut.
How this tile lives: It is the softest, most classical colour in the collection and it suits rooms that want warmth rather than edge: a traditional bathroom, a hallway in an older house, a retail space that needs to feel calm. The cross-cut face is scattered rather than directional, so it lays out easily in a room of any shape and does not demand a particular orientation.
More in this series: Astrum White · Astrum Beige · Astrum Light · Astrum Sand
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the 24″ x 48″ pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. On a low-contrast stone look the grout colour changes the finished result more than any other decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for wet areas and for floors that need them. Whether your project calls for one — and which one — depends on the room and the substrate. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
Matte is the only finish in this range, and the CUT comes with the size: the 24″ square is cross cut, the 24″ x 48″ is vein cut. This colour is made in one size only.
Your Pricing
Material Only
Coloured porcelain ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, tonal blending, setting, levelling, grout and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Tile installation depends on the tile size, layout, site conditions and the preparation required, so we quote it properly rather than publishing a number.
Book a Free In-Home Estimate →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $8.77 / sq ft.
Each box covers 26.86 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 26.86 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Astrum |
| Colour | IVORY |
| Product Type | Coloured-Body Porcelain tile |
| Look | Stone look — travertine, cross cut and vein cut |
| Stock Options | 24″ x 24″ Cross Cut |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Rectified — for tight, even joints |
| Shade Variation | V-3 — moderate variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Water Absorption | < 0.5% — ISO 10545-3, conforms |
| Bending / Breaking Strength | > 1300 N — ISO 10545-4, conforms |
| Dynamic Coefficient of Friction | 0.42 — ANSI A137.1/2012, conforms |
| Chemical Resistance | min. UB — ISO 10545-13, conforms |
| Frost Resistance | Required — ISO 10545-12, conforms |
| Stain Resistance | > Class 3 — ISO 10545-14, conforms |
| Surface Abrasion (PEI) | Not specified — no abrasion class published for this series |
| Slip Class | Not specified — no slip class published for this series |
| Application / Use | |
| Travertine Cut | — determined by the size |
| Suitable For | Floors and walls · residential · light and medium commercial |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
Travertine can be sawn two ways and this collection offers both. Cross cut, in the 24″ square, is sawn across the bed: the face is cloudy, open and non-directional. Vein cut, in the 24″ x 48″, is sawn along it: long parallel lines that run the length of the panel. The cut arrives with the size.
A cream travertine sawn across the bed, so the figure is open and cloudy rather than linear. Matte, with the soft pitting and drift of the real stone.
The manufacturer tests this series against 6 requirements and reports it as conforming to each: water absorption < 0.5% (ISO 10545-3); bending / breaking strength > 1300 N (ISO 10545-4); dynamic coefficient of friction 0.42 (ANSI A137.1/2012); chemical resistance min. UB (ISO 10545-13); frost resistance Required (ISO 10545-12); stain resistance > Class 3 (ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.
Professional Installation
This tile is rectified, so the edges are ground square and the joints can be kept tight and even — but that precision only survives over a properly flat substrate. Before anything is set we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly. The 24″ x 48″ format is the unforgiving one: a rigid piece that long cannot follow a floor that dips, and the result shows as lippage between tiles.
This series is rated V-3, so pieces differ noticeably in tone and figure. That variation is what stops a large floor looking printed, but it has to be spread rather than left where it falls. We open several boxes, dry-lay, and blend across the room instead of working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise on a large format: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast stone look the joint decides whether the floor reads as one surface or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
A cream travertine sawn across the bed, so the figure is open and cloudy rather than linear. Matte, with the soft pitting and drift of the real stone.

In the Room
Ivory cross cut in a warm, calm interior. Travertine looks quite different lit from the side than lit from above, so see a full-size piece in the room it is going into.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Very good with oak, cane, linen, aged brass and warm-white or clay walls. It is a naturally traditional colour, so it sits well with panelling and painted timber. Against cool blue-toned white paint the warmth reads slightly yellow — keep the scheme warm.
Size and cut come together here. The 24″ square is cross cut, with a cloudy non-directional face that lays out easily in an awkward room; the 24″ x 48″ is vein cut, with long parallel lines that want to run one way down a space. Decide the effect first and the size follows.
Keep one bulb colour temperature across the whole level. On a low-contrast stone look, mixing warm and cool light is the usual reason a floor looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match — this is a V-3 tile and the variation between runs is real.
Live with a full-size piece for a few days in the actual room. A stone-look face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
Expect real piece-to-piece variation. At V-3 that variation is moderate — enough to read as stone rather than as print, which is the point of it.
A warm cream or soft sand close to the tile. On a cloudy cross-cut face a dark grout turns the floor into a grid and kills the stone effect entirely.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Large-format tile needs a flatter substrate than small tile, because a rigid 24″ x 48″ piece cannot follow a floor that is not level. Preparation is quoted honestly after we have seen the room.
Mortar, grout and membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. A matte porcelain needs nothing stronger. The habit that keeps a matte floor looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes matte tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is under 0.5% and the series is tested for stain resistance to better than Class 3, so spills sit on the surface rather than soaking in. Wine, coffee and cooking oil wipe away. For anything dried on, a soft nylon pad and a neutral cleaner is enough. Avoid metal scouring pads.
The body of this tile is coloured rather than left white, so a chipped corner or a worn edge shows a tone close to the face instead of a bright white scar. Damage stays far less obvious than it would on a standard tile, which is one of the practical reasons this kind of porcelain gets specified for floors that take real use.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours in the range.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
24″ x 24″ only, in cross cut. The supplier does not make Ivory in the 24″ x 48″ vein cut. If you want a large-format vein cut in a warm tone, look at Sand, and if you want a pale one, look at Light or White.
No, and that is the point of it. Real travertine is porous, needs sealing and etches under anything acidic. This is porcelain with a travertine design printed and textured onto it: it absorbs almost no water, does not need sealing, and takes lemon juice or wine without marking.
Cross cut. Because the face has no direction, offcuts and rotations do not fight each other, so a room with bays or angles is far more forgiving. Vein cut wants to run one way and looks best in a room that lets it.
V-3 means moderate variation: pieces differ noticeably in tone and figure from one another, the way real stone does, without the dramatic swings of a V-4. It is what stops a large floor looking printed, and it is why we dry-lay and blend from several boxes before setting anything.
Outdoor is part of the manufacturer's published recommended applications for this series, and frost resistance is tested and reported as conforming. Exterior tiling also depends on the substrate, the drainage, the setting materials and the freeze-thaw exposure of the specific site, so we will not quote an outdoor installation from a web page. Tell us about the actual project and we will confirm suitability in writing before you order.
The manufacturer reports the series as conforming to the ANSI A137.1 requirement for a dynamic coefficient of friction above 0.42, but publishes no measured figure, so we will not quote you a number. No tile is non-slip in every condition. For a shower floor, a pool surround or a commercial specification with a stated slip requirement, bring us the requirement and we will advise.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match a V-3 tile. Coverage can differ between the two sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
The body of the tile is coloured to match the surface rather than being left white. A chip or a worn edge is far less obvious than on a standard glazed tile, which is one of the reasons this kind of porcelain gets specified for commercial floors.
Every tile installation needs the correct mortar and grout, and some floors and wet areas also call for a waterproofing or uncoupling membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Stone-look porcelain is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close