
Warm rustic cream · variegated rustic stone design — glazed ceramic tile


Quick Summary About the Product
Alpes Cream is the warmest of the three — a soft, variegated cream with the mottled movement of a weathered rustic stone rather than the flat print of a modern tile. It is stocked in two matching sizes: the 13″ x 13″, which the manufacturer approves for floors and walls, and the 8″ x 10″, which is approved for walls only.
How this tile lives: It is the traditional choice in the range, and it suits rooms that want softness rather than edge: a classic bathroom, a powder room, a kitchen with painted timber. The variegation is its great practical virtue — a mottled cream surface is far more forgiving of splashes and watermarks than a flat one. Remember the two sizes do different jobs: the 13″ square is the one approved for floors, and the 8″ x 10″ is a wall tile.
More in this series: Alpes Grey · Alpes White
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar suited to a glazed ceramic tile and to the surface it is going on — wall and floor applications call for different products. We work out the quantity when we prepare your estimate and confirm the right one for your substrate.
Available in a range of colours, and genuinely worth choosing in person against a full-size piece. On a variegated tile the grout colour changes the finished look more than any other decision. We will match it at the showroom.
Available for wet areas and for floors that need them. Bathrooms and shower surrounds usually do. Whether your project needs one, and which one, is assessed during your in-home estimate and quoted clearly.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
Matte is the only finish produced in this range. The two sizes have different approved uses — selecting a size updates the approved use shown below and throughout this page.
WALL USE ONLY — the manufacturer does not approve this size for floors. For a floor, select the 13″ x 13″.
Approved for floors and walls — this is the size to use underfoot.
Your Pricing
Material Only
Glazed ceramic ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, tonal blending, setting, levelling, grout and finishing. Floor installation work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Tile installation depends on the tile size, layout, site conditions and the preparation required, so we quote it properly rather than publishing a number.
Book a Free In-Home Estimate →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $3.04 / sq ft.
Each box covers 26.86 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 26.86 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Alpes |
| Colour | CREAM |
| Product Type | Monocottura — single-fired glazed ceramic tile (not porcelain) |
| Look | Stone look — variegated rustic stone |
| Stock Options | 13″ x 13″ (Floor & Wall) · 8″ x 10″ (WALL USE ONLY) |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Approved Use | — |
| Edge Profile | Not specified — no edge type is published for this series |
| Shade Variation | V-2 — slight variation between pieces |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | Not specified — no piece count is published for this series |
| Surface Abrasion (PEI) | Not specified — no abrasion class published for this series |
| Slip Class | Not specified — no slip data published for this series |
| Suitable For | Residential and light commercial · interior use · surface as stated above |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
This is a matching pair rather than one tile in two sizes. The manufacturer approves the 13″ x 13″ for floors and walls, and restricts the 8″ x 10″ to walls only. Selecting a size above changes the approved use shown on this page, and we will not supply the wall tile as flooring.
A cream ground with gentle darker and lighter mottling across the face, in a matte glaze. No two pieces read quite the same, which is what gives it its aged-stone character.
The supplier publishes the material, a V-2 shade variation rating, the sizes, the coverage per box and the approved use for each size. It publishes no technical-test table for this series: no water absorption figure, no breaking strength, no coefficient of friction, no slip class and no frost rating. Rather than borrow numbers from a porcelain range, this page states plainly that they are not published.
Professional Installation
Before anything else we confirm which size is going where. The 13″ square is the size the manufacturer approves for floors; the 8″ x 10″ is a wall tile and we will not lay it as flooring. Getting that right on the plan — and ordering the correct quantity of each — is the single most important step on this range, and it happens at your estimate, not on site.
Walls are checked for plumb, soundness and movement; floors for flatness and moisture. Ceramic is less forgiving than porcelain of a substrate that flexes, so backing board, priming and, where required, an uncoupling or waterproofing membrane are specified for the actual room rather than assumed.
This is a variegated rustic design rated V-2, so the mottling differs from piece to piece. We open several boxes, dry-lay and blend across the area instead of working carton by carton. Setting out is planned so the cut tiles fall in the least visible corners and the courses line up where floor meets wall.
Grout colour is chosen with you against a full-size piece, because on a mottled tile the joint either disappears into the pattern or fights it. Joints are cut in cleanly, cementitious grout in wet areas is sealed, and flexible sealant goes into every internal corner and change of plane rather than rigid grout.

Visual Character
A cream ground with gentle darker and lighter mottling across the face, in a matte glaze. No two pieces read quite the same, which is what gives it its aged-stone character.

In the Room
Cream is the warmest tone here. Because the mottling varies piece to piece, a full-size sample in your own light tells you far more than any photograph can.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Very good with painted timber, warm white and clay walls, brushed nickel or aged brass, and traditional sanitaryware. It sits comfortably in an older house where a hard cool grey would look imported. Avoid cool blue-toned whites next to it.
Choose by surface first, not by looks. The 13″ x 13″ is the size approved for floors, and it also works on walls; the 8″ x 10″ is a wall tile and nothing else. Most projects use both — the square underfoot, the rectangle on the wall above it, in one colour.
Keep one bulb colour temperature across the whole level. On a low-contrast stone look, mixing warm and cool light is the usual reason a floor looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not match, even on a V-2 tile.
Live with a full-size piece for a few days in the actual room. The seven colours in this range differ mainly in how light or dark they are rather than in pattern, and that is exactly the quality a screen renders differently on every monitor.
Expect some piece-to-piece variation. At V-2 that variation is slight — enough to read as stone rather than as print, and not enough to unsettle a large floor.
A warm off-white or soft sand close to the mid-tone of the tile. On a variegated surface a dark grout fights the mottling; a matched one lets the stone character carry the wall.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Ceramic is less forgiving than porcelain of a substrate that flexes, so backing board, priming and, in wet areas, a waterproofing membrane are specified for the actual room. Preparation is quoted honestly after we have seen it.
Mortar, grout and membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Dust or vacuum first, then wipe or damp-mop with warm water and a pH-neutral tile cleaner. A glazed ceramic surface needs nothing stronger, and rinsing after washing matters more than scrubbing — detergent film, not dirt, is what dulls a matte glaze. No vinegar, no bleach, no abrasive powders or metal pads.
The glaze keeps everyday splashes on the surface, so soap, toothpaste and cooking marks wipe away. Deal with anything acidic promptly rather than letting it dry. The supplier publishes no stain-resistance figure for this series, so we describe how it behaves rather than quoting a class it has not been given.
This is a single-fired glazed ceramic, not porcelain. It is lighter and less dense, which is why the manufacturer approves only the 13″ square for floors and restricts the 8″ x 10″ to walls. Treat it accordingly: it is not the material for a garage, an entry that takes winter grit, or a commercial floor.
The tile will outlast the grout. Re-seal cementitious grout periodically in bathrooms and backsplashes, and refresh the flexible sealant where the tile meets a bath, a counter or an internal corner as soon as it starts to shrink back.
Common Questions
Only the 13″ x 13″. The supplier states plainly that the 8″ x 10″ is wall use only, and we hold to that — it is a wall tile and we will not supply it as flooring. The two are designed to be used together: the square on the floor, the rectangle on the wall, in the same colour.
No. It is monocottura — single-fired glazed ceramic. Ceramic is lighter and less dense than porcelain and is the traditional material for walls and for lighter-traffic interior floors. If you need a dense porcelain for a busy entry or a commercial floor, we will point you at one of our porcelain ranges instead.
Very little. The supplier publishes the material, a V-2 shade variation rating and the usage list, but no technical-test table, no slip rating and no water-absorption figure for this series. We would rather tell you that than quote you numbers from a different product. If you need certified figures for a specification, ask us and we will request them from the supplier.
Only the 13″ x 13″. The supplier states plainly that the 8″ x 10″ is wall use only, and that only the 13″ square is suitable for floors. We hold to that: we will not supply or lay the 8″ x 10″ as flooring, in any size of area. The two are made to be used together — the square underfoot, the rectangle on the wall, in the same colour.
No. It is monocottura — single-fired glazed ceramic. Ceramic is lighter and less dense than porcelain and is the traditional material for walls and lighter-traffic interior floors. If you need a dense porcelain for a busy entry, a wet room or a commercial floor, ask us and we will show you the porcelain ranges instead.
Less than for our porcelain ranges, and we would rather say so than invent it. The supplier publishes the material, a V-2 shade variation rating, the size range and the usage list. It publishes NO technical-test table for this series: no water absorption figure, no breaking strength, no dynamic coefficient of friction, no slip class and no frost rating. Nothing has been borrowed from another product to fill those gaps. If you need certified figures for a specification, ask and we will request them from the supplier.
No. Outdoor is not part of the published usage for this series, and no frost-resistance data exists for it. This is an interior tile.
V-2 means slight variation: pieces differ a little in tone and in the mottling across the face. On a rustic stone design that variation is the point — it is what stops a wall looking printed. It is also why we dry-lay and blend from several boxes before setting anything.
Allow roughly 10 per cent extra for a straightforward layout and about 15 per cent for diagonal or more complex work. Order the whole job at once; a later top-up from a different production run will not match a variegated tile. The two sizes cover different areas per box, so the calculator on this page works from the exact size you select.
The supplier does not publish a piece count for this series — there is no Product Guide for it — so we do not state one. Coverage per box IS published and is what the calculator uses. We confirm the piece count with the supplier when you order.
Every installation needs the correct mortar and grout, and bathrooms and shower surrounds usually need a waterproofing membrane as well. All are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. We measure at your home, confirm which size goes on which surface, assess the substrate and put the price in writing. The material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do, and ask to see both sizes together — they are separate products with slightly different faces, and seeing the wall tile above the floor tile is the only way to judge the pairing. You can take samples home. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
2-Year Limited Installation Workmanship Warranty
Every Supply & Install floor installation includes our 2-year limited workmanship warranty. The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close