
SKU ES.AC.BON.0416.RD
A ribbed 3D wall tile in warm off-white. · ceramic look wall tile


Quick Summary About the Product
Acanto Bone Reeded is a narrow 4″ x 16″ ceramic wall tile with a fine ribbed relief pressed into its face. Bone is a soft warm off-white, and the whole effect comes from the shadow the ribs cast rather than from any colour or pattern — which is why it changes through the day as the light moves. It is stocked in 4″ x 16″ in a reeded matte finish.
How this tile lives: Bathroom and powder room walls, behind a vanity or a freestanding bath, kitchen walls and backsplashes, fireplace surrounds, hallway feature panels, and reception walls in salons, clinics and small hospitality rooms.
More in this series: Acanto Almond Reeded · Acanto Almond V Ribbed · Acanto Baltic Blue Reeded · Acanto Baltic Blue V Ribbed · Acanto Bone V Ribbed · Acanto White Reeded · Acanto White V Ribbed
At a Glance
Available Accessories
Everything the installation needs, supplied alongside your tile.
Setting mortar matched to the format, including large-and-heavy-tile mortar for the bigger pieces. We work out how many bags your square footage needs when we prepare your estimate, and confirm the right product for your substrate rather than assuming it.
Available in a range of colours, and worth choosing in person against a full-size piece. The grout colour changes the finished result more than any other single decision. We will match it at the showroom and confirm the quantity with your estimate.
Available for showers, tub surrounds and splash zones. Whether your wall needs one — and which one — depends on the room and what is behind the tile. We assess it during your in-home estimate and quote it clearly if it is required.
Quantities depend on tile size, trowel notch, joint width and the condition of the substrate, so they are confirmed with your written estimate rather than guessed from square footage alone.
SKU ES.AC.BON.0416.RD
This page covers the reeded matte finish. The reeded gloss and reeded matte and v ribbed gloss and v ribbed matte version is its own product — see More Colours below. This product is stocked in one size.
WALL USE ONLY — the manufacturer does not approve this option for floors.
Your Pricing
Material Only
Glazed Wall Tile ·
SKU
Need Professional Installation?
Our own crew handles the whole installation — surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
Book a Free In-Home Estimate for Tiles →No obligation · Final price confirmed in writing
Installation pricing depends on room size, substrate condition, layout and the number of transitions — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $8.76 / sq ft.
Each box covers 10.49 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 10.49 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official product guide and technical test data for this series. Where a value is not published we say so.
| Collection | Acanto |
| Colour | Bone Reeded |
| Product Type | Glazed Wall Tile |
| Look | Decorative 3D wall tile — a ribbed 4″ x 16″ ceramic, walls only |
| Stock Options | 4″ x 16″ Reeded Matte |
| Selected Size | |
| Actual Dimensions | |
| Finish | |
| Edge Profile | Non-rectified — set with a slightly wider grout joint |
| Shade Variation | Not specified — no shade-variation rating published for this series |
| Thickness | |
| SKU | |
| Coverage / Box | |
| Pieces / Box | |
| Length | ± 0.5% — UNE-EN ISO 10545-2, conforms |
| Curvature | ± 0.3% — UNE-EN ISO 10545-2, conforms |
| Water Absorption | > 10% (BIII) — UNE-EN ISO 10545-3, conforms |
| Modulus of Rupture | > 15 N/mm2 — UNE-EN ISO 10545-4, conforms |
| Thermal Shock Resistance | No glaze cracks — UNE-EN ISO 10545-9, conforms |
| Crazing Resistance | No glaze cracks — UNE-EN ISO 10545-11, conforms |
| Chemical Resistance - Household Products | GA (no effect) — UNE-EN ISO 10545-13, conforms |
| Chemical Resistance - Low Concentration Acids | GLA (no effect) — UNE-EN ISO 10545-13, conforms |
| Ease of Cleaning | Class 5 (maximum) — UNE-EN ISO 10545-14, conforms |
| Surface Abrasion (PEI) | Not specified |
| Slip Class | Not specified, and not applicable - this is a wall tile with a deep 3D relief and no floor rating. |
| Application / Use | |
| Approved Use | — |
| Suitable For | Walls — interior. Not rated for floors. |
| Material Price | |
| Professional Installation | Available — contact us for a tile installation estimate |
The manufacturer approves this series for interior walls and does not rate it for floors — its own product guide heads the range as a wall tile and its recommended-applications row carries no floor entry. We will not supply it as flooring. If you want this look underfoot, ask us and we will show you a porcelain range that is rated for it.
A flat tile looks the same at nine in the morning and nine at night. A ribbed one does not: the relief throws a fine line of shadow that shifts as the light changes, so a plain warm off-white wall stays interesting without any pattern being printed on it.
The manufacturer tests this series against 9 requirements and reports it as conforming to each: length ± 0.5% (UNE-EN ISO 10545-2); curvature ± 0.3% (UNE-EN ISO 10545-2); water absorption > 10% (BIII) (UNE-EN ISO 10545-3); modulus of rupture > 15 N/mm2 (UNE-EN ISO 10545-4); thermal shock resistance No glaze cracks (UNE-EN ISO 10545-9); crazing resistance No glaze cracks (UNE-EN ISO 10545-11); chemical resistance - household products GA (no effect) (UNE-EN ISO 10545-13); chemical resistance - low concentration acids GLA (no effect) (UNE-EN ISO 10545-13); ease of cleaning Class 5 (maximum) (UNE-EN ISO 10545-14). Every one is published as a pass against the minimum rather than as a measured number. Where no figure is published, this page says so rather than borrowing one.
Professional Installation
Proper tile installation depends on surface preparation, mortar selection, layout planning, levelling, spacing, grout selection and finishing. Our team can provide a tile installation estimate based on the tile size, layout, site conditions, and the preparation required.
This tile is non-rectified, so the edges are left as fired and there is a little more size variation piece to piece. That is normal, and it is absorbed by a slightly wider grout joint — which suits the character of the tile rather than working against it. The substrate still has to be right: we check for flatness, movement and moisture, grind the high spots, fill the low ones and prime correctly before anything is set.
The manufacturer publishes no shade-variation rating for this series, so we treat it the way we treat any tile: open several boxes, dry-lay, and blend across the area rather than working carton by carton, planning where the cuts land at the same time.
Each piece is set in mortar suited to its format, trowelled for full coverage and back-buttered where the size calls for it, with a levelling system holding every joint flush while it cures. Full coverage matters more than most people realise: hollow spots are invisible on handover day and become a cracked tile under a dropped pan three years later.
Grout colour is agreed with you before we start, because on a low-contrast face the joint decides whether the surface reads as one plane or as a grid. Joints are cut in cleanly, terminations are trimmed properly, and flexible sealant goes where tile meets a different material.

Visual Character
A flat tile looks the same at nine in the morning and nine at night. A ribbed one does not: the relief throws a fine line of shadow that shifts as the light changes, so a plain warm off-white wall stays interesting without any pattern being printed on it.

In the Room
The published photograph shows this profile run full height in a bathroom, in this colour. It is the one supplier scene that shows a colour we actually stock. The scene shows the profile in both a matte and a glossy glaze; we stock this colour in matte only.
Everything worth knowing about this tile, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Interior walls only. This is a glazed ceramic wall tile with a published water absorption above 10 per cent, and it is not rated for anything else.
This is a wall tile. Plan the setting-out with us so the courses land well against your fittings and the cuts fall where they are least visible.
Keep one bulb colour temperature across the whole level. Mixing warm and cool light is the usual reason a surface looks like two different colours from opposite ends of a room.
Allow about 10 per cent extra for a straight-lay room, or 15 per cent for diagonal and complex layouts. Keeping a few spare pieces after the job is finished is always worth it.
Coverage is per box for the option you have selected. The calculator above works out your box count.
Order the whole job at once. A later top-up from a different production run will not reliably match.
Live with a full-size piece for a few days in the actual room. A tile face is one of the hardest things to judge from a screen — the texture and the scale of the figure only make sense in the hand.
The manufacturer publishes no shade-variation rating for this series, so judge the consistency from physical samples rather than from a figure.
Match the grout to the tile as closely as you can. On a ribbed tile the joint is competing with dozens of shadow lines already, and a contrasting grout turns a calm textured wall into a busy striped one. Use an unsanded grout — sanded grout drags in the relief and is hard to clean out of the grooves.
Set in mortar over a flat, sound, properly prepared substrate, blended across boxes for tone, levelled while it cures and finished with grout and trims. Wet areas and some floors also need a waterproofing or uncoupling membrane — we confirm that on site rather than assuming it.
Preparation is quoted honestly after we have seen the room — the substrate does more to determine how a finished surface looks than the tile does.
Mortar bags, grout and waterproofing or uncoupling membrane are all available in store, so the whole job comes from one place.
Long-Term Performance
Sweep or vacuum grit before it gets walked in, then damp-mop with warm water and a pH-neutral tile cleaner. Nothing stronger is needed. The habit that keeps a tiled surface looking right is rinsing after washing rather than letting detergent dry on it — film, not dirt, is what makes tile look dull. No vinegar, no bleach, no abrasive powders.
Water absorption is tested to > 10% (BIII) and reported as conforming, so spills sit on the surface rather than soaking in. Wipe them up and use a soft nylon pad with a neutral cleaner for anything dried on. Avoid metal scouring pads.
Felt pads under every chair and table leg, lift rather than drag appliances, and a good mat inside exterior doors so tracked-in grit never reaches the floor. Those three habits do most of the work, and they matter most on the palest and the darkest colours.
The tile will outlast everything around it — grout is the part that wants occasional attention. Re-seal cementitious grout periodically in wet areas and refresh the flexible sealant at thresholds and internal corners when it starts to show wear.
Common Questions
No. This is a glazed ceramic wall tile: its published water absorption is above 10 per cent, which puts it in body class BIII, and it carries no wear rating of any kind. It is not rated to be walked on and we will not supply it for that. If you want this ribbed look underfoot, ask us and we will show you a porcelain that is rated for it — a different product, not a different finish of this one.
The depth and the shape of the groove. Reeded is a fine, evenly rounded rib that reads as a soft corduroy and catches a gentle line of shadow. V Ribbed is a deeper V-cut, so the shadow is sharper and the wall reads as more architectural from across the room. Reeded is the quieter of the two and the slightly more affordable; V Ribbed makes more of a statement. They are the same body, the same colours and the same size, so the only real question is how much shadow you want.
Vertical is the usual choice and it makes a room feel taller, which is why it suits powder rooms and anywhere with a low ceiling. Horizontal makes a narrow room feel wider and reads more like panelling. Both are correct. What matters more is deciding before the tiler starts, because the cuts and the setting-out differ between the two and you cannot change your mind halfway up.
Less than people expect. The relief is shallow and the glaze is fired and non-porous, so dust and soap film wipe off with a cloth. The published ease-of-cleaning result is Class 5, the highest on that scale. The part that needs attention is the grout in the grooves, which is the argument for matching the grout closely and using an unsanded one.
Ten per cent on a straightforward wall, and fifteen if there are niches, returns or a herringbone. A relief tile is less forgiving than a flat one because a cut through the ribs is visible, so a tiler will discard more offcuts than usual. Bring us your measurements and we will work the quantity out with you rather than guessing at it.
The manufacturer publishes no shade-variation rating for this series, so we cannot quote you one. In practice expect the normal piece-to-piece variation of a printed tile. We dry-lay and blend from several boxes before setting anything regardless of what is published.
No. This series is published for interior use only, and its documentation contains no frost-resistance test. We will not supply it for an exterior application. Several other ranges we carry do carry outdoor approval — ask us and we will point you at them.
We cannot tell you, and we are not going to guess. The manufacturer publishes no coefficient-of-friction test for this series at all. If wet-area slip performance is a requirement for your project, ask us and we will either request the data from the supplier or point you at a range that publishes it.
Allow roughly 10 per cent extra for a straight-lay room, or about 15 per cent for diagonal and more complex layouts. Order the whole job at once — a later top-up from a different production run will not match. Coverage can differ between sizes, so the calculator on this page works from the exact option you select rather than from a single figure.
No. The manufacturer's own Application field for this item says wall, so we supply it as a wall product only and we will not fit it as flooring — not in a shower base, not as a small inset. If you want this look underfoot, ask us and we will show you a floor-rated alternative.
Every tile installation needs the correct mortar and grout, and a wet wall - a shower, a tub surround, a splash zone - may also call for a waterproofing membrane. All three are available in store. Which ones your project needs, and how much, is confirmed as part of your installation estimate rather than guessed at.
Yes. Our team can provide a tile installation estimate based on the tile size, layout, site conditions and the preparation required. We measure at your home and confirm the price in writing, and the material price on this page always stays separate so you can see exactly what the tile itself costs.
Please do. Tile is one of the hardest things to judge from a screen — the texture and the scale of the face only make sense in the hand. Full-size tile is on display in Bolton and you can take samples home to check them against your cabinets and your own lighting. We serve Bolton, Caledon, Brampton, Vaughan, Woodbridge and the surrounding area.
Why Choose Us
Family-owned and operated in Bolton. We know the homes here, the subfloors they are built on and the way an Ontario winter treats them. Every recommendation comes from local experience, not a call centre script.
Installation is completed by The Flooring Mart’s own in-house installation teams, from preparing the surface to setting and grouting the tile. We do not use subcontractors, which is why we can stand behind our installation work.
Material price per square foot is published right here. Installation is quoted separately and confirmed in writing before any work begins — no hidden add-ons, no after-the-fact surprises. What you approve is what you pay.
Tile, flooring, stairs, bathroom and kitchen renovations under one roof, including the mortar, grout and membrane your installation needs. One team, one estimate, one accountable contractor.
Product Warranty
The manufacturer states that technical data is supplied by the manufacturer and subject to change, and does not publish a consumer warranty in the product data we hold — ask us and we will obtain the written terms from the supplier before you order.
Free In-Home Estimate
We visit your space, measure properly, assess the substrate, and provide a complete tile supply and installation price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close