
Pale natural blonde maple — the lightest floor in the collection. · prefinished solid North American maple



Quick Summary About the Product
Subruce is prefinished solid North American maple — boards milled from a single piece of wood, 3/4″ thick and 4-3/4″ wide in random lengths, with a tongue-and-groove profile and a micro-bevel on all four edges. Each box covers 21.7 sq ft. Pale natural blonde maple — the lightest floor in the collection.
Why people choose it: At $5.49 / sq ft, this is a full 3/4″ solid North American maple floor you can sand back and refinish decades from now, so it stays with the house. Bring your measurements to the Bolton showroom and we will price the whole job in one visit.
Where it belongs: living rooms, dining rooms, bedrooms, hallways and home offices on or above grade, fastened over a plywood or OSB wood subfloor. For bathrooms and laundry rooms, consider suitable vinyl or tile. For basements, consider suitable vinyl, tile or engineered hardwood specifically approved by its manufacturer for below-grade installation.
At a Glance
Available Accessories
Milled and finished in our own shop to match this floor. Exact profiles, dimensions and quantities are confirmed at your free in-home estimate — nothing here is priced or reserved through this page.

Finishes the front edge of a step, or a landing where the floor meets a drop.

Bridges the expansion gap where two floors of the same height meet in a doorway.

Steps the floor down to a lower adjacent surface such as tile, vinyl or carpet.
The manufacturer also lists Stair Nosing, Reducer, T-Moulding and Vent Cover for this collection. Profiles and sizes are not published, so we confirm them with the supplier before ordering.
Stairs, railings, baseboards and trim are part of what we do, so the floor and everything that finishes it come from one team. Ask us about matching accessories.
Solid North American maple · 4-3/4″ × 3/4″ × RL
Your Pricing
Material Only
Prefinished solid maple · 4-3/4″ × 3/4″
$119.13 per box · each box covers 21.7 sq ft
Material-only price — installation is quoted separately below.
Need Professional Installation?
Calculate your project estimate
Our own installers handle the whole job — subfloor checks, moisture assessment, acclimation guidance, fastening, expansion gaps, transitions and finishing. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Installation is priced after we measure your home, and confirmed in writing before any work begins.
Book a Free In-Home Estimate →Free to book · Final scope and pricing confirmed in writing
Installation pricing depends on subfloor condition, floor flatness, room layout, stairs and the number of transitions.
Or call us: 905-872-7557
All Six Maple Colours
Material Estimate
Estimate your material cost
Enter your room size in square feet — we’ll work out the boxes and material cost at today’s price of $5.49 / sq ft.
Each box covers 21.7 sq ft, so the box count is worked out from that and always rounded up to a whole box.
This is a material estimate, not a written renovation quote. For the best current deal, call or visit our showroom before placing your order.
Material only. The figure above is the floor itself, shown before HST (13% in Ontario) and based on the square footage you entered. Installation, delivery and subfloor preparation are quoted after we measure your home, and we confirm price and availability with you before anything is ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your material estimate, and our team receives it too so we can help with stock, delivery and the best available deal. We confirm live availability with you before anything is ordered.
Confirmed specifications only — taken from the manufacturer’s specification sheet and current product page for this collection. Where their two documents differ, we confirm the detail with them before it goes on the page.
| Product | Subruce |
| Construction | Solid hardwood — one piece of wood, no core layers |
| Species | North American Maple |
| Janka Hardness | Confirmed with our supplier before ordering — the manufacturer publishes the species group rather than the single species the Janka figure depends on, and we do not publish a hardness number we cannot attribute. |
| Colour (manufacturer) | Subruce — light natural tone |
| Plank Dimensions | 4-3/4″ × 3/4″ × Random lengths |
| Coverage / Box | 21.7 sq ft |
| Manufacturer Warranty | 35-year residential |
| Weight / Box | 58 lbs |
| Colour Variation | Low–Medium — boards vary naturally; blend from several cartons |
| Material Price | |
| Professional Installation | Available. Calculate your project estimate |
Solid hardwood is milled from a single board of maple. There is no veneer to wear through and no core to delaminate — the surface you walk on is the same wood all the way down, which is what makes future sanding and refinishing possible.
Everything in this table is a figure both of the manufacturer’s documents agree on. Where they differ — the finish chemistry and the grading term — we confirm the detail with them for your order rather than pick a side. Ask us and we will get you the answer.
Solid wood expands and contracts with the seasons more than any engineered floor. The manufacturer publishes an ideal range of 35–55% relative humidity — realistic in a GTA home with normal heating and a humidifier in winter, and worth knowing before you buy rather than after.

How This Colour Reads
Subruce is the palest colour on the manufacturer's swatch card — a blonde, barely-tinted natural with soft cream and wheat movement between boards. Light floors do real work in a house: small rooms feel larger, low ceilings feel taller, and daylight carries further into the plan.

Pairing It
It suits Scandinavian-leaning rooms, white-on-white kitchens and anywhere brightness is the goal, with black or deep-toned accents for contrast. Two honest cautions with any pale floor: dark debris — pet hair, entry grit — shows sooner than on a mid brown, and natural board-to-board variation is more visible. That variation is real wood; racking boards from several cartons spreads it evenly.
Pairs well with: White and pale-oak kitchens, light walls, natural textiles, black accents for contrast.
Room note: The pick for small or darker rooms that need brightening; shows dark debris sooner than mid tones. A full-size board from our Bolton showroom, checked in
your own light, settles the colour question faster than any screen can.
Outstanding Value
At $5.49 per square foot, Subruce puts a genuine 3/4″ solid maple floor — one piece of wood, no veneer, no core layers — within reach of a mid-range budget. Professional installation is available and is priced after we measure your home, backed by our 2-year limited workmanship warranty.
Everything worth knowing about this floor, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Subruce is the palest colour on the manufacturer's swatch card — a blonde, barely-tinted natural with soft cream and wheat movement between boards. Light floors do real work in a house: small rooms feel larger, low ceilings feel taller, and daylight carries further into the plan.
At 4-3/4″ this is one of the wider boards in the collection, so a room reads calmer with fewer seams.
Keep one bulb colour temperature across the whole level — mixing warm and cool is the usual reason a floor looks like two different colours.
Allow about 10% extra for a straight-lay room, or 15% for diagonal and more complex layouts. Boards come in random lengths, so a cutting allowance is normal.
Each box covers 21.7 sq ft, and box counts are always rounded up to a whole box. The calculator above works out your box count.
Order the whole job at once — wood is natural, and a later top-up batch may not match.
Live with a sample for a few days in the actual room. Morning light, evening pot lights and a north-facing window all change how it reads.
Expect real board-to-board variation — that is the point of solid hardwood, and why a small photo never tells the whole story.
Full-size boards are in our Bolton showroom, and we can bring samples to your free estimate.
This is a solid 3/4″ board fastened to a properly prepared, flat and sound subfloor. The manufacturer lists Nail or staple down, on or above grade over plywood or OSB — which method suits your home is confirmed against your subfloor before we quote.
The boards need time to settle in the home before installation.
Solid hardwood is at its best on or above grade. For a basement, consider suitable vinyl, tile or engineered hardwood specifically approved by its manufacturer for below-grade installation.
Professional Installation
A solid 3/4″ floor is only as good as what happens before the first board goes down. Installation is priced after measurement — here is what that measurement actually checks.
This collection installs on or above grade over a sound plywood or OSB wood subfloor. We check flatness, structure and moisture before quoting — wood fastened over a damp or uneven base telegraphs every problem upward, and no finish hides it.
Solid maple must acclimate in the rooms where it will live, to the manufacturer’s instructions, before installation. The published ideal range is 35–55% relative humidity at 18–27°C — the boards adjust to your house before they are fixed to it.
Boards are fastened down over the wood subfloor with an expansion allowance kept at the walls, covered by baseboard and quarter round. Solid wood moves with the seasons; the gap is what lets it move without buckling.
We open several cartons at once and rack boards from all of them so natural colour variation spreads across the room instead of clustering. Doorway transitions, vents and stair connections are planned before the first row — matching nosings, reducers and T-mouldings exist for this collection and we confirm the right pieces at your estimate.
Long-Term Performance
Vacuum with a soft head or dust-mop weekly — grit underfoot is what dulls a finish. For deeper cleaning, a well-wrung microfibre mop with a pH-neutral hardwood cleaner. Never a steam mop, never a soaking-wet mop — both drive moisture into solid wood.
Wipe spills promptly and keep pet bowls on trays. The factory finish resists a wiped-up spill; it does not make solid wood waterproof, and standing water will eventually mark any hardwood.
Felt pads under every chair and table leg, soft casters on anything that rolls, and breathable mats at entries — the manufacturer specifically advises against rubber-backed mats, which can trap moisture and mark the finish.
Keep indoor humidity between 35 and 55% through the year — a humidifier in winter, dehumidification in a damp summer. This is the single most important habit for any solid wood floor in Ontario.
When traffic patterns appear, the manufacturer’s guidance is a professional screen and re-coat — a refresh of the finish without sanding the wood. Full sanding and refinishing is possible when desired; that renewability is the reason people choose solid over everything else.
Common Questions
A pale natural blonde takes almost any wall colour. Pure whites give a bright, airy result; soft colour works because the floor stays quiet underneath. Whatever you choose, sample the paint on the wall next to a board rather than judging it from a chip — floors change how a colour reads.
Pale oak, walnut, black metal, linen and rattan. A darker piece or two stops such a light floor from feeling washed out. Simple, solid-coloured pieces let a natural wood floor do the talking; a rug is the easiest way to break up a large expanse of floor.
Neutral 3000K keeps it clean and Nordic; 2700K warms it towards honey in the evening. Keep one bulb colour temperature across the whole level — mixing warm and cool bulbs is the usual reason a floor looks like two different colours from room to room.
Scandinavian, coastal and modern-minimal. It is the brightest floor in the maple range and opens a small room more than any other.
Works with both. Against dark cabinets it gives strong, deliberate contrast; against white it produces a very light, calm room. Bring a door sample or a cabinet chip to the showroom and lay it on the board — that answers it in about ten seconds.
Yes. Full-size boards are on the floor at our Bolton showroom at 55 Healey Rd, Unit 2, and we can bring samples to your free in-home estimate. We recommend living with a sample for a few days in the actual room before you decide.
It is a solid 3/4″ maple board. The manufacturer lists Nail or staple down, on or above grade over plywood or OSB. Which method suits your home depends on the subfloor — a wood subfloor is normally fastened, a concrete slab normally glued — and we confirm that against your subfloor before quoting. Solid hardwood belongs on or above grade, not in a basement.
Allow about 10% extra for a straight-lay room, or 15% for diagonal and complex layouts. Each box covers 21.7 sq ft, so 500 sq ft works out to 24 boxes before any waste allowance. Box counts are always rounded up to a whole box. Order the whole job at once — a later top-up batch may not match.
The manufacturer backs this floor with a 35-year residential warranty, valid when it is installed and maintained to the published instructions. Every supply and install project also carries our own 2-year limited workmanship warranty.
Ask us. We fabricate stair treads, risers, nosings and transitions to match the floors we install, and we will confirm exactly what is available for Subruce with the store, so what you order is what arrives.
Sweep or dry vacuum with the beater bar off and damp mop with a hardwood cleaner — barely damp is all a hardwood floor ever needs, and the wet mop and steam cleaner are best kept for tile and vinyl. Felt pads under furniture, mats at exterior doors, and reasonably stable indoor humidity through the year. Being solid wood, it can be sanded and refinished during its life.
Yes — we supply and install from our Bolton showroom across Bolton, Caledon, Brampton, Vaughan, Woodbridge, Kleinburg, King City, Mississauga, Etobicoke, Toronto, Orangeville, Tottenham, New Tecumseth and the wider GTA.
Why Choose Us
Our showroom is at 55 Healey Rd, Unit 2 in Bolton. We know the homes here, the subfloors they are built on and what an Ontario winter does to solid wood — every recommendation comes from local experience.
Installation is completed by The Flooring Mart’s own in-house installation teams. We do not use subcontractors, which is why we can stand behind our installation work with a 2-year limited workmanship warranty.
The material price per square foot is published right here — $5.49. Installation is quoted separately after measurement and confirmed in writing before any work begins. What you approve is what you pay.
Flooring, stairs, trim, bathrooms and kitchens under one roof. The same maple can flow to matching stair components and transitions, planned in one estimate by one accountable team.
35-Year Residential Manufacturer Warranty
The manufacturer covers this solid hardwood collection with a 35-year residential warranty, valid when the floor is installed and maintained to the manufacturer’s instructions. Supply-and-install projects add our own 2-year limited installation workmanship warranty on top. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms before you order.
Free In-Home Estimate
We measure properly, check the subfloor and moisture, and provide a complete supply and installation price in writing — yours to keep and compare. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke and the greater Toronto area.

← → navigate · Esc to close