
Pale raw greige · 1.2 mm real oak veneer



Quick Summary About the Product
Raw is a pale raw greige engineered hardwood floor: a 1.2 mm layer of genuine oak, wire-brushed and UV finished, bonded to a multi-layer plywood core. At 6-1/2″ wide and 3/4″ thick it is a practical, medium-wide board — substantial underfoot, easy to lay out in real rooms, and stable enough for an Ontario winter. It is graded ABCD by the manufacturer, which we group as Character — a description of appearance, how much natural knotting and colour movement the boards carry, never of quality.
How this floor lives: Raw is a greige oak in oak with softly warm undertones. In day-to-day light it reads as a true mid-tone — light enough to stay welcoming, deep enough to ground a bright room. As a character-grade floor it shows honest knots and natural markings, so no two boards read identical. Screens and room lighting shift wood tones, so always confirm with a physical sample from our Bolton showroom.
Similar floors: Oyster 6-1/2″ (lighter) · Ashen 6-1/2″ (darker) · American Oak Honey Wheat 6″ (similar look)
At a Glance
Certified Performance
Available Accessories
Supplied unfinished — stained on site to match your floor.

Finishes the front edge of a step or a landing where the floor meets a drop.

Bridges the expansion gap where two floors of the same height meet in a doorway.

Steps the floor down to a lower adjacent surface such as tile or vinyl.
Matching transitions may vary by colour and supplier availability. If a factory-finished matching transition is not available, we can usually provide unfinished transitions that can be stained to coordinate with the floor. Staining may be required, the final colour match should be verified against your floor before installation, and availability is always confirmed before anything is ordered.
Pale raw greige · Multi-layer plywood core
Your Pricing
Material Only
Regular: $5.99 / sq ft
Professional installation is available for this floor.
Need Professional Installation?
Calculate your project estimate
Our installers handle the subfloor preparation confirmed in your estimate, the installation itself, and all transitions and trim. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply.
Book a Free In-Home Estimate →No obligation · Installation is quoted in writing at your free in-home estimate.
Installation pricing depends on room sizes, subfloor condition, stairs and layout — always confirmed in writing before any work begins.
Or call us: 905-872-7557
More Colours in This Range
View all 42 colours →Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $3.99 / sq ft.
Each carton covers 26.49 sq ft, so the carton count is worked out from that and always rounded up to a whole carton.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 26.49 sq ft per carton. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
Confirmed specifications only — taken from the manufacturer’s official engineered hardwood spec sheet and installation guide.
| SKU / Colour Code | Not Specified |
| Plank Width | 6-1/2″ |
| Plank Length | 15.7″ – 71.65″ (random length) · 400 – 1820 mm |
| Total Thickness | 3/4″ (19 mm) |
| Hardwood Veneer | 1.2 mm real oak |
| Wood Species | Oak |
| Manufacturer Grade | ABCD |
| Appearance Grade | Character — appearance only, never quality |
| Construction / Core | Multi-layer plywood core |
| Surface Texture | Wire-Brushed |
| Finish | UV finish · 5–10° gloss |
| Edge Profile | Tongue & groove · Micro bevel |
| Pattern | Plank |
| Installation Method | Nail / Staple Down · Nail + Glue Assist · Full Glue Down · Floating (glued) |
| Suitable Location | Above, on, or below grade — not bathrooms, laundry rooms, or areas exposed to elevated moisture |
| Radiant Heat | Approved with a floating or full glue-down installation — never nail or staple down |
| Moisture Content | 6–10% (avg 9%) |
| Coverage / Carton | 26.49 sq ft · 62 lbs |
| Certification | FloorScore Certified |
| Warranty | 30-Year Limited Residential · structure and moisture warranties for as long as you own the home |
| Material Price | $3.99 / sq ft · ~$105.70 / carton (26.49 sq ft) |
| Professional Installation | Available. Calculate your project estimate |
The surface is 1.2 mm of real oak — actual timber with its own grain, knots and colour movement. No two boards are identical, because no two trees are.
Multi-layer plywood underneath, with each ply laid across the one beneath it. That is what lets a real wood floor cope with a humid July and a furnace-dry February without cupping or gapping the way solid lumber can.
Nail or staple down, nail with glue assist, full glue down, or floating — over plywood, OSB or concrete, and above, on or below grade. This is a milled tongue and groove board; when floated, the tongue and groove are glued. Over in-floor radiant heat, the maker allows a floating or full glue-down installation — never nail or staple down.
1.2 mm is the sensible-value veneer. You get exactly the same real hardwood surface, the same finish and the same board width — the difference is how much wood sits above the core. It is the choice when you want genuine hardwood at the friendliest price per square foot. In practical terms: honest value — treat the factory finish as the finish rather than planning to sand it.
The manufacturer’s own technical documentation for this floor — full specifications, installation requirements, care guidance and the written warranty:
Specification Sheet (PDF) ↗
Installation & Warranty (PDF) ↗
Care & Cleaning (PDF) ↗
This is a milled tongue and groove floor with four methods its maker approves: nail or staple down, nail with glue assist, full glue down, and a floating installation with the tongue and groove glued, over the maker’s recommended underlay. Which one we use is decided by your subfloor, not by preference. Over plywood or OSB, nailing or stapling with glue assist is the usual choice at this 6-1/2″ width — the adhesive adds hold that keeps a wider board flat and quiet through the seasons. Over concrete, full glue down is the standard approach.
Before anything goes down, we want the subfloor flat, clean and dry, and the boards given time in the room to settle to the conditions they will live in. Every home is a little different, so we assess the space and the subfloor at your estimate and tell you plainly what preparation it needs. Over in-floor radiant heat this floor is approved with a floating or full glue-down installation — never nail or staple down.
Order about 10% extra for a straight-lay room, 15% for diagonal or complex layouts, and note that the manufacturer recommends a minimum 5% cutting and grading allowance for natural wood on top of that. We measure, test and confirm all of this at your free in-home estimate rather than guessing on site.
Construction
1.2 mm of genuine oak bonded to a multi-layer plywood core — the wood you want to see, over the structure that keeps it flat.
Outstanding Value
At $3.99 per square foot, Raw puts a genuine oak floor within reach of a mid-range budget — without printed images, without shortcuts. Professional installation is available. Installation is quoted in writing at your free in-home estimate. The installation work is backed by our 2-year limited workmanship warranty.
Visual Character
A wire-brushed surface with a micro-bevel edge, laid 6-1/2″ wide — wide enough to feel calm and current, narrow enough to suit a normal Ontario room without overwhelming it.
Warm white, mushroom and pale grey-green are the easy wall colours here — they let the floor lead without competing with it. If you would rather the room had a focal point, charcoal or bronze on a feature wall works with this tone rather than against it. For furniture, white, oatmeal, black and pale oak — almost anything, honestly.
Warm bulbs pull it beige, cool bulbs pull it grey — sample it under your own fixtures. Contemporary, transitional and Scandinavian interiors all suit it. Because this is real wood, expect genuine board-to-board variation — that is the point of hardwood, and it is why a small chip on a screen never tells the whole story.
Request a sample and live with it for a few days in the actual room. Colour, grain and sheen read completely differently under morning light, evening pot lights and a north-facing window. We keep full-size boards in our Bolton showroom and can bring samples to your free in-home estimate.
Professional Installation
We start by getting the subfloor flat, clean and sound — levelling the high and low spots and securing anything loose. A hardwood floor is only ever as good as what sits underneath it. Any required subfloor preparation will be assessed and confirmed in your estimate.
The cartons are opened and laid flat in the room so the wood can settle to the conditions it will live in. Real wood moves with the air around it, and giving it time before installation is one of the simplest things that makes a floor sit well for years.
We install by the method your subfloor calls for, leaving the proper expansion gap at every wall, staggering the end joints, and drawing boards from several cartons at once so the natural colour variation blends evenly across the room rather than pooling in one corner.
Transitions, stair nosing and trim finish the job. These pieces come unfinished, so the staining is done to match your floor — we will show you the profiles and walk you through the staining before anything is ordered.
Long-Term Performance
Sweep or dry vacuum regularly with the bristles down — no beater bar. Mats at every exterior door matter more on a wood floor than on any other surface: grit tracked in from outside is what dulls a finish. The manufacturer recommends a coarse mat outside the door and a fine mat inside.
Dry or damp mop with a standard hardwood floor cleaner and a microfibre mop — damp meaning the floor is dry again within 15 seconds. Never wet mop, and never use a steam cleaner. Wipe spills immediately; water and wood do not mix, and damage from standing water is not covered by warranty.
Felt protectors under all furniture and chair legs, and never slide furniture across the floor. Keep pet nails trimmed, and avoid walking on the floor in heeled shoes. All hardwood floors will scratch and dent depending on how they are lived with — that is the trade for a genuine wood surface.
Keep indoor relative humidity between 30% and 70% year-round — a humidifier in winter is the single best thing you can do for a wood floor in Ontario. Real wood also oxidizes and darkens under UV light; closing blinds during peak sun keeps the colour even, especially beside floor-to-ceiling windows.
Common Questions
Warm white, mushroom and pale grey-green sit most comfortably with Raw’s pale raw greige. If you want the floor to feel grounded rather than blended, a feature wall in charcoal or bronze does it without fighting the wood. Always test a paint sample against a floor sample in your own light — we can send both.
White, oatmeal, black and pale oak — almost anything, honestly. Because the veneer is genuine oak, the floor carries real grain and colour movement, so simple, solid-coloured furniture usually looks better against it than heavily patterned pieces.
Warm bulbs pull it beige, cool bulbs pull it grey — sample it under your own fixtures. If you are planning pot lights, keep one colour temperature throughout the level — mixing warm and cool bulbs is the most common reason a floor looks like two different colours from room to room.
Contemporary, transitional and Scandinavian interiors all suit it. At 6-1/2″ wide with a wire-brushed surface and a micro-bevel edge, it reads as a calm, current floor rather than a dated one.
ABCD is the manufacturer’s own grade for this floor, and we group it on our site as Character. Grade describes appearance only — how much natural knotting, mineral streak and colour variation the boards carry. It says nothing about how well the floor is made or how long it lasts. A character grade shows the wood honestly: visible knots, mineral streak and real colour movement board to board. It is the most forgiving grade in a busy home, and the one most people picture when they picture real hardwood. Above Select sits Select & Better, the cleanest combined grade in hardwood — ask us if that is the look you are after.
The veneer is the layer of real hardwood on top of the plywood core — it is the wood you see and walk on. Raw carries a 1.2 mm veneer. 1.2 mm is the sensible-value veneer. You get exactly the same real hardwood surface, the same finish and the same board width — the difference is how much wood sits above the core. It is the choice when you want genuine hardwood at the friendliest price per square foot.
Yes. The surface is genuine oak — real hardwood, cut from real timber. What is different from solid hardwood is what sits underneath: instead of one thick piece of lumber, the veneer is bonded to a multi-layer plywood core, which is what keeps the board flat through an Ontario winter.
With a 1.2 mm veneer, treat the factory finish as the finish. There is not enough wood above the core for a full sanding, and we would rather tell you that now than have you discover it in fifteen years. If refinishing matters to you, look at the 2.0 mm veneer option or at solid hardwood instead.
This is a tongue and groove board. Its maker’s installation instructions allow nail or staple down, nail with glue assist, full glue down, or a floating installation with the tongue and groove glued, over the maker’s recommended underlay. Over plywood or OSB, nail or staple with glue assist is the usual choice at this 6-1/2″ width; over concrete, full glue down. Either way the subfloor needs to be flat, clean and dry first. We look at your subfloor and confirm the method at your free in-home estimate.
Yes, with normal common sense — a mat at the sink and dishwasher, and spills wiped when you see them. What the manufacturer specifically excludes is bathrooms, laundry rooms and any area exposed to elevated moisture; installing there voids the warranty. For those rooms we would put you in waterproof vinyl or tile instead.
Yes — the manufacturer approves this engineered hardwood above, on, or below grade, which is one of the real advantages of engineered construction over solid. Basements do need a dry slab, so we look at the space with you before recommending hardwood down there — and if it is not the right room for it, we will say so.
Yes, with a floating or full glue-down installation — its maker does not allow nail or staple down over radiant heat. The system must be thermostat controlled, run in before the floor goes down, and kept within the manufacturer’s temperature and humidity limits. We go through the details before quoting a radiant project.
Order about 10% extra for a straight-lay room and 15% for diagonal or complex layouts. The manufacturer also recommends a minimum 5% cutting and grading allowance on top of the measured area for natural wood. Each carton covers 26.49 sq ft — we work out exact quantities at your free estimate.
Sweep or dry vacuum with the bristles down, and dry or damp mop with a standard hardwood floor cleaner — damp meaning the floor is dry again within 15 seconds. Never wet mop and never use a steam cleaner. Wipe spills straight away, keep indoor humidity between 30% and 70%, use felt pads under furniture, and keep pet nails trimmed. Mats at the doors do more for a wood floor than anything else.
Unfinished T-moulding, reducer and stair nosing can be made available for this floor. Because they come unfinished, the staining has to be done to match the colour — we will talk you through how that works and what it involves at your estimate.
Yes. Our own installers handle the subfloor preparation confirmed in your estimate, the installation itself, transitions and trim. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply. Hardwood installation genuinely depends on the subfloor, the layout and the stairs, so installation is quoted in writing at your free in-home estimate. Calculate your project estimate with our installation calculator.
Yes — we supply and install throughout Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, Toronto, Orangeville and the GTA. Our showroom is in Bolton, and we would always rather you saw a full-size board in person before deciding.
Why Choose Us
Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.
Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.
Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.
Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.
30-Year Limited Residential Warranty · Structure & Moisture Warranties · 2-Year Limited Installation Workmanship Warranty
This floor carries a 30-year limited residential manufacturer warranty, alongside structure and moisture warranties that run for as long as you own the home — the plies will not separate, and topical spills and subfloor moisture are covered when the floor has been installed and maintained to the published instructions. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty. The complete terms of our installation warranty are on our Flooring Installation Warranty page; ask us for the manufacturer’s written warranty terms.
Free In-Home Estimate
We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close