
Iron forge grey · Maple engineered hardwood



Quick Summary About the Product
Maple Blacksmith is a iron forge grey from the Brand Surfaces Engineered T&G collection — genuine wire brushed maple on a 7-1/2″ wide, 3/4″ thick tongue and groove board with a matte sheen and micro bevel edge. The stain is applied by hand rather than by machine, so every board carries its own subtle shading — the reason this collection looks rich rather than repeated.
Why people choose it: at $6.49 / sq ft, this is a hand-stained maple floor approved for on, above or below grade — one floor that can run through the whole house. Bring your measurements to the Bolton showroom and we will price the whole job in one visit.
The photograph is the manufacturer’s official colour swatch. With a hand-applied stain, expect healthy variation from board to board — please judge the final colour from a physical sample, which we are happy to send home with you.
At a Glance
Available Accessories
The manufacturer lists accessories for this collection as custom order — we confirm what can be ordered for your project. Our own unfinished transitions, stained on site to coordinate, are always available.

Finishes the front edge of a step or a landing where the floor meets a drop.

Joins this floor to another of the same height in a doorway or opening.

Steps the floor down to a lower adjacent surface such as tile or vinyl.
At a Glance
Certified Performance
Available Accessories
Supplied unfinished — stained on site to match your floor.

Finishes the front edge of a step or a landing where the floor meets a drop.

Bridges the expansion gap where two floors of the same height meet in a doorway.

Steps the floor down to a lower adjacent surface such as tile or vinyl.
Matching transitions may vary by colour and supplier availability. If a factory-finished matching transition is not available, we can usually provide unfinished transitions that can be stained to coordinate with the floor. Staining may be required, the final colour match should be verified against your floor before installation, and availability is always confirmed before anything is ordered.
Iron forge grey · Hand-applied stain
Your Pricing
Material Only
Regular: $9.49 / sq ft
7-1/2″ wide wire brushed maple · Brand Surfaces
19.45 sq ft per box · about $126.23 per box
Need Professional Installation?
Calculate your project estimate
Our installers handle the subfloor preparation confirmed in your estimate, the installation itself, and all transitions and trim. The work in your written installation scope is backed by our 2-year limited workmanship warranty; existing subfloor, structural and moisture conditions are excluded, and complete terms apply.
Book a Free In-Home Estimate →No obligation · Installation is quoted in writing at your free in-home estimate.
Installation pricing depends on room sizes, subfloor condition, stairs and layout — always confirmed in writing before any work begins.
Or call us: 905-872-7557
Flooring Calculator
Estimate your material cost
Enter your room size in square feet — we’ll work out the cartons and material cost at today’s price of $6.49 / sq ft.
Each box covers 19.45 sq ft, so the box count is worked out from that and always rounded up to a whole box.
For the best current deal, call or visit our showroom before placing your order.
Estimate covers material only, based on 19.45 sq ft per box. Delivery charges may apply depending on distance from our store and the quantity ordered.
Email me this estimate
Name and email are required. A phone number is required to email the estimate and optional for the PDF.
We’ll email your estimate, and our team receives it too so we can help with stock, delivery, and the best available deal. No obligation.
This collection is built around reactive stains and fumed, smoked processes that give the wood a weathered, aged character. The stain is applied manually rather than by machine, so the shading shifts subtly from board to board — variation that makes the finished floor read rich and layered rather than printed. What you are choosing here is a colour direction; the boards themselves supply the depth.
That hand-applied character is also why we recommend judging this floor from a physical sample in your own light rather than from any photograph — ours included.
Confirmed specifications only — taken from the manufacturer’s official engineered hardwood spec sheet and installation guide.
| Collection | Brand Surfaces — Engineered T&G |
| Wood Species | Maple |
| Construction | Engineered hardwood — tongue and groove |
| Plank Width | 7-1/2″ |
| Total Thickness | 3/4″ |
| Plank Length | Random lengths (RL) |
| Surface Texture | Wire Brushed |
| Gloss / Sheen | Matte |
| Edge Treatment | Micro Bevel |
| Installation Method | Manufacturer states Nail & Glue |
| Installation Levels | On, Above or Below Grade |
| Radiant Heat | Approved by the manufacturer’s installation guide, with conditions — see the FAQ below |
| Coverage / Box | 19.45 sq ft |
| Accessories | Custom Order — confirmed for your project |
| Warranty | 25-Year Limited Residential (prorated) — official document |
| Material Price | $6.49 / sq ft · ~$126.23 / box (19.45 sq ft) |
| Professional Installation | Available. Calculate your project estimate |
The surface is genuine maple — actual timber with its own grain, wire brushed so the texture reads underfoot as well as to the eye — on an engineered tongue and groove board that keeps a 7-1/2″ plank flat through an Ontario year, on any grade level.
Each figure in this table comes from the manufacturer’s own published documents for this exact collection — the product page, the official warranty and the official installation guide. A few details, including the appearance grade and wear-layer thickness, the manufacturer does not publish; we confirm anything you need with them for your order rather than print a guess.
Approved for installation on, above or below grade, this floor can run from the basement to the bedrooms — one continuous colour story through the whole home, which is exactly where engineered construction earns its keep.
How This Floor Reads
Iron forge grey — wire brushed maple with a matte sheen, so the floor reads as texture and tone rather than shine. The hand-applied stain gives each board its own subtle shading.
Outstanding Value
At $6.49 per square foot, Maple Blacksmith puts a hand-stained wire brushed maple floor within reach of a mid-range budget. Professional installation is available and is quoted after we measure your home, backed by our 2-year limited workmanship warranty.
Pairing It
Crisp whites, soft blacks and cool naturals let this floor lead the room, and black metal, light oak, charcoal and cream textiles sit comfortably on it.
Room note: a full-size sample from our Bolton showroom, checked in your own light, settles the colour question faster than any screen can — especially with a hand-stained floor.
Everything worth knowing about this floor, in plain language. If anything here raises a question, ask us at your free in-home estimate — that is what it is for.
Maple Blacksmith is a iron forge grey. Crisp whites, soft blacks and cool naturals let the floor lead; if you want a focal point, a deeper feature wall works with this tone.
At 7-1/2″ wide there are fewer seams, so rooms read calmer and more settled.
Keep one bulb colour temperature across the whole level — mixing warm and cool is the usual reason a floor looks like two colours.
Allow about 10% extra for a straight-lay room, or 15% for diagonal and complex layouts. Boards come in random lengths, so a cutting allowance is normal.
Each box covers 19.45 sq ft. The calculator above works out your box count.
Order the whole job at once — a hand-stained floor is exactly the kind where a later top-up batch may read differently.
Live with a sample for a few days in the actual room. Morning light, evening pot lights and a north-facing window all change how it reads.
Expect real board-to-board variation — the stain is applied by hand, and that variation is the design.
Ask us for a sample — we can also bring boards to your free in-home estimate.
This is a tongue and groove engineered board. The manufacturer’s published method is Nail & Glue, approved on, above or below grade over a properly prepared, flat and dry subfloor — confirmed against your subfloor before we quote.
The boards acclimatise in the home before installation, per the manufacturer’s installation guide.
Radiant heat is approved by the manufacturer with conditions — see the FAQ below, and we will walk them through with you.
Professional Installation
We start by getting the subfloor flat, clean and sound — levelling the high and low spots and securing anything loose. A hardwood floor is only ever as good as what sits underneath it. Any required subfloor preparation will be assessed and confirmed in your estimate.
The cartons are opened and laid flat in the room so the wood can settle to the conditions it will live in. Real wood moves with the air around it, and giving it time before installation is one of the simplest things that makes a floor sit well for years.
We install by the method your subfloor calls for, leaving the proper expansion gap at every wall, staggering the end joints, and drawing boards from several cartons at once so the natural colour variation blends evenly across the room rather than pooling in one corner.
Transitions, stair nosing and trim finish the job. These pieces come unfinished, so the staining is done to match your floor — we will show you the profiles and walk you through the staining before anything is ordered.
Long-Term Performance
Sweep or dry vacuum regularly with the bristles down — no beater bar. Mats at every exterior door matter more on a wood floor than on any other surface: grit tracked in from outside is what dulls a finish. The manufacturer recommends a coarse mat outside the door and a fine mat inside.
Dry or damp mop with a standard hardwood floor cleaner and a microfibre mop — damp meaning the floor is dry again within 15 seconds. Never wet mop, and never use a steam cleaner. Wipe spills immediately; water and wood do not mix, and damage from standing water is not covered by warranty.
Felt protectors under all furniture and chair legs, and never slide furniture across the floor. Keep pet nails trimmed, and avoid walking on the floor in heeled shoes. All hardwood floors will scratch and dent depending on how they are lived with — that is the trade for a genuine wood surface.
Keep indoor relative humidity between 30% and 70% year-round — a humidifier in winter is the single best thing you can do for a wood floor in Ontario. Real wood also oxidizes and darkens under UV light; closing blinds during peak sun keeps the colour even, especially beside floor-to-ceiling windows.
Common Questions
Maple Blacksmith reads as a iron forge grey, so crisp whites, soft blacks and cool naturals sit most naturally with it. Always compare a paint sample against a floor sample in your own light — we can send both home with you.
Simple, solid-coloured pieces usually look best: black metal, light oak, charcoal and cream textiles are all easy partners. The stain on this collection is applied by hand, so the boards carry their own variation and the floor supplies the pattern.
Use neutral bulbs around 3000K–3500K, which keep the grey honest. Keep one bulb colour temperature across the whole level — mixing warm and cool bulbs is the usual reason one floor looks like two colours.
The manufacturer publishes the colour, species, texture and construction for this collection, and no separate appearance grade — so we confirm the look with you from a physical board rather than print a grade the documents do not state. The hand-applied stain means healthy board-to-board variation is part of the design.
It is a 7-1/2″ wide, 3/4″ thick tongue and groove engineered board. The manufacturer's published method is Nail & Glue, approved for installation on, above or below grade over a properly prepared, flat and dry subfloor. We confirm the right approach for your subfloor at your free in-home estimate.
The manufacturer's official installation guide approves thermostatically controlled radiant systems with conditions: the system runs for two weeks before installation, the surface temperature never exceeds 29°C (84°F), the temperature is raised gradually after installation, and area rugs are not used over radiant heat. We review those conditions with you before quoting.
Allow about 10% extra for a straight-lay room and 15% for diagonal or complex layouts. Each box covers 19.45 sq ft, and the calculator on this page works the box count out for you. We confirm exact quantities at your free in-home estimate.
The manufacturer publishes a 25-Year Limited Residential Warranty for this engineered T&G flooring, covering finish wear-through and delamination under normal residential use when the floor is installed and maintained to the published instructions. It is a limited, prorated warranty — read the full official document. Supply & Install projects add our own 2-year limited workmanship warranty on the installation.
The manufacturer lists accessories for this collection as custom order. We confirm exactly what can be ordered for your project — and where a factory accessory is not available, we can usually supply unfinished transitions stained on site to coordinate.
Sweep or vacuum with the beater bar off, and clean with a barely damp microfibre mop and a hardwood floor cleaner — the wet mop and the steam cleaner are best kept for tile and vinyl. Felt pads under furniture, mats at exterior doors, and steady indoor humidity through the seasons keep it beautiful for decades.
Yes — and with a hand-stained floor we would insist on it. Ask us for a sample to live with for a few days: morning light, evening pot lights and a north-facing window all change how a floor reads.
Yes — we supply and install throughout Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, Toronto, Orangeville and the GTA. Our showroom is at 55 Healey Rd, Unit 2 in Bolton.
Why Choose Us
Family-owned and operated in Bolton. We know the homes, the climate, and the communities we serve. Every recommendation is backed by real local experience, not a call centre script.
Our trained crews do the job right the first time. Correct subfloor prep, proper expansion gaps, clean trim finishing — no shortcuts. This is what separates a floor that lasts 25 years from one that fails in three.
Material price, installation price, everything — quoted clearly before any work begins. No hidden fees, no after-the-fact surprises. What you approve is what you pay.
Flooring, stairs, bathroom renovations, kitchen updates — we handle it all. One team, one estimate, one accountable contractor. No coordinating between trades.
25-Year Limited Residential Warranty · 2-Year Limited Installation Workmanship Warranty
Maple Blacksmith carries the manufacturer’s 25-Year Limited Residential Warranty for engineered T&G flooring — covering finish wear-through and delamination under normal residential use, valid when the floor is installed and maintained to the published instructions. It is a limited, prorated warranty; read the full official document. Every Supply & Install project additionally includes our 2-year limited installation workmanship warranty.
Free In-Home Estimate
We visit your space, take measurements, and provide a complete supply & install price in writing — no obligation, no pressure. Serving Bolton, Caledon, Brampton, Vaughan, Woodbridge, Mississauga, Etobicoke, and the greater Toronto area.

Scroll to zoom · Drag to pan · R to rotate · ← → navigate · Esc to close